A worn chain shifts poorly and wears sprockets at an accelerated rateThe CC-3 is a Go / No-Go gauge designed to accurately indicate when a chain reaches 0.75% and 1% wear - the point at which most chain manufacturers suggest replacementThe chain should be replaced soon if the 0.75% side fits into the chain before other drive train components also start to wear out fastIf the 1% side fits into the chain the chain is worn out and should be replaced immediatelyMade from precision laser cut steelConsider that if you replace a chain because of wear other vital drive-chain components may need to be renewed too10-speed compatible
An accurate way to check for wear of roller and pin on chains1% of wear is enough to affect chainrings and sprockets and allow shifting performance to deteriorateJust insert the chain Checker's pins into two links press the swing arm gauge and then check the gauge window for an accurate readingReads wear from 0.25% to 1%10-speed compatible
A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The CG-2.4 contains everything needed to quickly and easily clean the chain cogs and chainrings: CM-5.3 CYCLONE™ CHAIN SCRUBBER Clean bicycle chains quickly easily and effectively without the hassle and mess of removing the chain from the bike. The CM-5.3 uses an extra-large solvent reservoir and a series of four rotating brushes to get chains sparkling clean inside and out. A magnet at the bottom of the CM-5.3's solvent reservoir draws away particles scrubbed from the chain effectively keeping them from being redistributed on the chain during cleaning. The durable sponge material draws solvent from the chain as it exits the CM-5.3 reducing drips and mess. The CM-5.3 can handle any bike-specific chain from wide 3/16' single-speed* to narrow 12 and 13-speed. A reversible handle allows the chain to pass through forwards or backwards for compatibility with center drive e-bikes. CB-4 BIO CHAINBRITE Park Tool CB-4 is a 100% biodegradable natural plant-based degreaser formulated for use in the CM-5.3 Cyclone Chain Scrubber CM-25 Professional Chain Scrubber or with a scrubbing brush as a general purpose degreaser. When used with a chain cleaner CB-4 gets bicycle chains clean inside and out so they're good as new. Will not harm alloy plastic rubber or carbon fiber parts so it's safe to use for cleaning cassettes chainrings pulleys or any other component that accumulates muck and grime. GSC-1 GEARCLEAN™ BRUSH The GSC-1 is specially designed to free your bicycle drivetrain from muck and grime. The comfortable handle features a contoured toothed end to reach dirt deep between the gears and tough nylon bristles clean the derailleur and chain. Saves wear and tear on your chain and cassette. Also works great on derailleur pulleys brakes or other places where dirt collects. CG-2.4 FEATURES The Chain and Drivetrain Cleaning Kit includes: CM-5.3 Cyclone™ Chain Scrubber GSC-1 GearClean™ Brush 8 oz. bottle of Bio ChainBrite™ The CG-2.4 works on nearly any bike including multi-speed single-speed and e-bikes. INCLUDES: CM-5.3 Cyclone™ Chain Scrubber — Instructions GSC-1 GearClean™ Brush CB-4 Bio ChainBrite™ — Instructions
Cleans bicycle chain quickly easily and effectively without the hassle and mess of removing the chain from the bike. The Cyclone™ uses a large solvent reservoir hundreds of rotating bristles and a two-step cleaning process to get chains really clean improve shifting performance and extend the life of the chain and other expensive drivetrain parts. Works with all multi-speed bikes (5 6 7 8 9 10 11 and 12-speed) as well as some single-speed models and e-bikes The handle can be mounted on either side allowing the CM-5.3 to be used easily with e-bikes Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain Special wicking sponge draws solvent from the chain as it exits minimizing drips and mess Sturdy handle makes the Cyclone™ easy to use and control Holds 2 fluid ounces (59ml) of solvent
Compact lightweight and designed for use with all chains except Campagnolo® 11 speed hollow pin chains. Includes: 5 6mm Allen keys Chain hook Allen keys and chain tool fit together to form an easily stored unit All hardened steel tools Clever design allows easy operation of tools both separately and in unison 105g
A worn chain shifts poorly and wears sprockets at an accelerated rateThe CC-3 is a Go / No-Go gauge designed to accurately indicate when a chain reaches 0.75% and 1% wear - the point at which most chain manufacturers suggest replacementThe chain should be replaced soon if the 0.75% side fits into the chain, before other drive train components also start to wear out fastIf the 1% side fits into the chain, the chain is worn out and should be replaced immediatelyMade from precision, laser cut steelConsider that if you replace a chain because of wear other vital drive-chain components may need to be renewed too10-speed compatible
A chain lube from Park Tool, the leader in bicycle maintenance productsUsing PTFE and a proprietary blend of oils, Park Tool Chain Lube works great in wet or dry conditionsIt penetrates, reduces friction, prolongs component life, displaces moisture, and protects parts from rust and corrosionCan also be used to good effect on cables, spoke nipples, and derailleur and brake pivots4 oz. / 120 mm Bottle
Key Features: Cleans bicycle chain quickly, easily, and effectively without the hassle and mess of removing the chain from the bike, The Cyclone™ uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts, Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes, The handle can be mounted on either side allowing the CM-5.3 to be used easily with e-bikes, Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain, Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess, Sturdy handle makes the Cyclone™ easy to use and control, Holds 2 fluid ounces (59ml) of solve.
A chain tool that is small enough to go anywhere, yet which performs like a full size workshop toolFine thread and slide-away T-handle gives plenty of pressure at the pin head to move stubborn chain rivetsIncludes a loosening shelf to release stiff links after assemblyReplaceable driving pin headWorks on most bicycle chains, including 10-speedWeighs just 77 grams
Key Features: The HCW-16.3 is a combination 15mm pedal wrench and chain whip,Use for both pedal removal/installation and for cassette removal,Chain whip features improved compatibility with 5 speed to 12 speed mountain and road bike cassettes and freewheels,The HCW-16.3 is 10.75" long (27.3cm).
Key Features: Updated to fit current 12-speed cassettes, this combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending, flexing and wear and features a long, molded handle in addition to a built in hex shaped driver.
Small and compact chain tool performs like a shop quality tool by using a fine threaded shaft and super strong replaceable pin. Nominal Dimensions: 60mm tall, 55mm wide and 15mm thick. Perfect take-along chain tool at only 77 grams. Handy "loosening shelf" to remedy stiff links after reassembly. Compatible with Sram Eagle hollow pin chains. 1/8", 5-12 speed chain tool