The Wolf Tooth 120 BCD Chainring is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweakerBred from ice-cold Minneapolis winters and explicitly designed to work perfectly on anything from an MTB to a road bike, the Wolf Tooth 120 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish.Compatibility:These rings fit any 120 BCD crankset or 4-bolt spider.,For SRAM cranksets you must use the stock M10x.75 bolts with a shoulder on them. These are not standard bolts and Wolf Tooth's bolts will not work with this chainring. Note that only about 3 threads will engage (same with the stock SRAM rings).,The only other supplier of these M10 x .75 bolts is Wickwerks if your crankset doesn't already have them. These bolts actually have more threads engaged and will work better than the SRAM ones.,36t is the smallest number of teeth that fits on a 120 BCD.,For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle),Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).,Chainline - 51mm for 36t and 52mm for 38t (38t is wider for more chainstay clearance).
Machined From 7075-t6 Aluminium At Wolf Tooth's Hq In Minneapolis, Usa, These 1x Chainring Bolts Are Beautifully Crafted To Top-tier Standards. If You're Looking To Adorn Your Bike With Precision Engineered Components Down To Even The Finest Details, These Are An Ideal Choice.
The Wolf Tooth Direct Mount Chainring for Cane Creek Titanium eeWing cranks with 12-speed HyperGlide+ Chain is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x set ups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with 12-speed HyperGlide+ chains, this direct mount chainring means more time riding and less time fumbling with dropped chains. The nickel-plated finish looks stunning and works fantastically with both eeWing and SRAM direct mount cranksets.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go. Key Features: Cane Creek eeWing cranksets,SRAM 3 bolt direct mount cranksets,. Compatibility:Compatible with Shimano 12-speed Hyperglide+ chains on bikes with boost and non-boost spacing.
The Wolf Tooth 104 BCD Chainring is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly on anything from an MTB to a road bike, the Wolf Tooth 104 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish.Compatibility:Fits any 104 BCD cranksets,For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle),Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).,Chainline: (approximate as BB centring and cranksets vary) 30t - 48mm on 3x cranksets and 49mm on 2x.Chainring bolts are required for 1x:104 x 30t - use 10mm bolts ,104 x 32t uses 6mm chainring bolts,If mounting a 104 BCD bash ring you will need 8mm bolts which Wolf Tooth does not sell but are standard on most triple cranksets..
The Wolf Tooth 110 BCD Flat Top Cyclocross and Road Chainring is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly on anything from a cyclocross, gravel or road bike, this Wolf Tooth 110 BCD Flat Top Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish.Compatibility:These rings are for use with 110 BCD 5 arm cranksets.,They do not fit on the cranksets for Shimano DA 9000 / Ultegra 6800.,Not compatible with Campagnolo CX10/11.,Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position.,Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting..Chain Compatibility:9, 10, 11, & 12spd Eagle - These chainrings are designed to work with all 9-speed, 10-speed, and 11-speed chains. They also work with 12-speed Eagle and 12-speed KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain or SRAM 12-speed Flattop chain.,If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention,Optimal chainline varies - these rings can be mounted in either the big or small ring position on double cranksets. The most common mounting is in the big ring position because of chainstay clearance..
The Wolf Tooth 130 BCD Chainring is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and designed to work your road or cyclocross bike, the Wolf Tooth 130 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish.Compatibility:These rings are for use with 130 BCD 5 arm cranksets. ,Does not fit on the cranksets for Shimano DA 9000 / Ultegra 6800,Not compatible with Campagnolo CX10/11..Chain Compatibility:9, 10, 11, & 12spd Eagle - These chainrings are designed to work with all 9-speed, 10-speed, and 11-speed chains. They also work with 12 speed Eagle and 12-speed KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain or SRAM 12-speed Flattop chain.,If using a 9-speed drivetrain use a 10-speed chain as it fits tighter for better chain retention.,Sram Exogram cranksets with inset nut must use stock fifth bolt + spacer(s). The Force CX1 bolt features fifth bolt with a 1x specific shoulder. This kit can be found online. ,Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position..38T important note: The chain may contact the spider arm slightly when using the 38T chainringWe recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for a 39T smallest ring....
The Wolf Tooth 64 BCD Chainring is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly on anything from an MTB to a road bike, the Wolf Tooth 64 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.Looks great when paired with the Wolf Tooth 104 BCD bash ring.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish.Compatibility:Fits any 104/64 BCD crankset (104 BCD is the middle/big position 64 is the smallest ring position),The Universal Model fits both 104/64 BCD cranksets and the Shimano 11 speed XT M8000 cranks and SLX M7000 cranks. ,Drivetrains: 1x9, 1x10, 1x11 and 1x12 drivetrains,Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains,Shimano 12-speed chains require the use of our Shimano 12-speed specific chainrings,If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention,Chainline (approximate as BB centring and cranksets vary),Chainline is 46 mm on a triple and 48 mm on a double crank,Chainline on a Standard M8000 or M7000 crankset is 48mm and 50mm on a boost version.,You can use the stock bolts to mount this chainring.
Patented Drop-stop® Wide-narrow Tooth Profile For Minimised Dropped Chains,Perfect For 1x Setups,Machined In-house At Wolf Tooth's Hq In Minnesota, USA,.CompatibilityFour Of The Holes Are Threaded And One Is A Normal Through Bolt Hole (Done For Surly Compatibility). Use A Stock 10mm Chainring Bolt For The Fifth, Hidden Arm.,These Rings Fit Any 94 Bcd 5 Bolt Crankset,For Plus Size Bike Applications With The Surly Od Crankset, E.g. Instigator And Krampus, You Will Need To Use The Stock Spacers (Spacer Kit Qbp Part Number Cr8609) That Came With Your 1x Setup. You Will Also Need Some 16mm Bolts.,For 1x9, 1x10, 1x11 And 1x12 Drivetrains (Including Sram Eagle)Compatible With All 10, 11, And 12-speed Chains Except Shimano 12-speed Chains.,If Using A 9-speed Drivetrain Use A 10-speed Chain (Shifts And Works Well On A 9-speed Drivetrain And Fits The Ring Tighter For Better Chain Retention).,.,Chainline (Approximate As Bb Centring And Cranksets Vary).
Key Features:Any Race Face Cinch™ System Crankset.,Compatible With Shimano 12-speed Hyperglide+ Chains.
We designed these bolts to be the best on the market. These single chainring optimized bolts have a 4 mm hex socket on the bolt and a 6 mm hex socket on the nut so no spanner is needed. These are 6 mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs.Compatibility:Any Wolf Tooth bolt-on Drop-Stop® chainrings with through holes,Works with other brands single chainrings as well,.Complementing products:Wolf Tooth Drop-Stop chainrings,GCX and GC cassette expanders,.Tech Specs:Designed and manufactured in Minneapolis, MN USA,7-8 NM tightening torque with light grease on threads only,Material: 7075-T6 aluminum,Size: M8 x.75 x 5,Weight: 4 bolts - 8 grams.
The Wolf Tooth 110 BCD Asymmetric 4-Bolt Chainring for Shimano Cranks is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly on anything from a cyclocross, gravel or road bike, this Wolf Tooth 110 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish.Compatibility:Fits 110 BCD Asymmetric 4-bolt cranks,Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703, and Tiagra 4700,Sizes 38T and larger are compatible with Dura Ace 9100, Ultegra 8000 and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 36T chainring will not work for this modification. Click here to see Wolf Tooth's instructions for the modification.,Confirmed modification fit with Dura Ace 9100 Power Meter in size 42t or larger,Mounts in the big ring position of the cranks but is offset inward for perfect chainline.,The stock 2x bolts will not work. You will need our 6mm bolts which are optimized for single ring mounting.,Drivetrains: 1x9, 1x10, 1x11 and 1x12 drivetrains,Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains,Shimano 12-speed chains require the use of our Shimano 12-speed specific chainrings,If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention,Chainline 47.5mm.
The Wolf Tooth Elliptical Direct Mount Chainring for Race Face Cinch is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with Race Face Cinch cranks, this direct mount chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.PowerTracWolf Tooth’s PowerTrac Elliptical (PTE) design, as the name indicates, is driven by a concern for power and traction – and crucially for you, premised on a wealth of knowledge from precision engineers who also love to ride bikes.A growing number of riders are converting to elliptical chainrings on 1x setups for the simple reason that they have been demonstrated to improve ride quality.The idea behind elliptical chainrings can be summarised as follows: biomechanical power output varies throughout a pedal stroke, at positions where power is higher, having a larger diameter section of chainring, and thus greater engagement area, translates into greater forward propulsion. At positions where biomechanical power is lower, a smaller chainring diameter means greater efficiency in rotation. Overall what this means for you is maximised power output throughout each pedal stroke.Wolf Tooth note that elliptical rings also mean steadier torque on the rear wheel as there is less spinning on the downstroke and easier rotation in between these. Steadier torque on the rear wheel gives better traction and sustained momentum – great on tough climbs and through headwinds.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Compatibility:Any Race Face Cinch(TM) system crankset (including Next SL, Sixc, Turbine, Aeffect),Both standard (142mm rear hub spacing) and Boost (148mm hub spacing) offsets available. ,Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability.,For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle),Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).,Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!),Chainline 49mm (standard), 52mm (Boost).