ODI Ruffian BMX Lock-On GripsThese awesome bar grips are perfect for fast and aggressive BMX use as they offer exceptional control in a low-profile design. They feature a diamondised pattern which delivers optimal traction while their lock-on system is 100% slip free which makes them ideal for both racing and nailing your favourite tricks.Features:Use: BMX Pattern: Diamondised Profile: Ultra-thin Grip System: Lock-on Includes: Snap Cap end plugsBuy ODI Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The lightest dual clamp lock-on grips available. Ideal for XC racing. Weight: 65g Width: 130mm Grip material: High density foam Lock rings: 6061 T-6 aluminium Torx bolt size: T10
We have enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs We have developed the most innovative grip yet. Troy's the kind of guy that will make you throw all of your conventional processes out the window in order to make something for the World's Fastest Racers. With that we introduce the ODI / TROY LEE DESIGNS LOCK-ON MOUNTAIN BIKE GRIP. Quality and Innovation that can only be found by combining two World Leaders. Features: Grooved Channels prevent mud and water buildup Overmolded flap gives added protection on outside clamp Unique Undercut pads give slim comfortable feel with the ultimate amount of grip Custom flanged design provides hand support with more usable grip surface Etched inside clamp provides clocking system to assist on installation
ODI has a long and established racing heritage. Our first generation Lock-On System was born out of the need to quickly fasten grips for downhill racing and quickly became the standard for racers everywhere. We are pushing the bar even further and have partnered up with 2-time UCI World Cup Downhill Champion Aaron Gwin to develop the next evolution in race-inspired grips. The new AG-1 grips were redesigned from the ground up with racing specific featuresWhen we partnered with Aaron Gwin to develop a grip, we set out to make the most technically advanced DH grip ever made. We started from the ground up with an entirely new single-clamp locking system which offers over 10mm of extra grip space and allows for a more ergonomic feel on the either end of the grip. We topped this off with multiple layers of gripping surface utilizing a unique rib pattern that gives positive traction without making the grip feel larger. To ensure that the grip would stand up to the abuse of world class DH courses, we added alloy reinforced ends which combines the strength of aluminum with the forgiveness of a plastic end. We packed all of this into an ultra slim grip for optimal feedback and split second decision making. The result of all this hard work is the AG1 Lock-0n Grips: the best DH grips ever madeAluminium reinforced ends - give extra durability against grip blowout,Angled rib pattern - Slightly harder compound designed to match articulation points of your hands for added control,New single clamp - Version 2.1 Lock-On System (clamps are not replaceable),Hard plastic end - Molded over the aluminium endcap, the end provides durability but will not gouge,New multi-layer grip pattern - Soft compound with dual knurl pattern for improved control in all conditions,Ergonomic design - provides more comfort for those who ride on the inside or outside of the grip,Increased Bolt size to 3mm Allen to help prevent stripping and increase strength. (Torque tested up to 70 In-Lb (8Nm).
The same ergonomic grip as the GE1 Evo factory, but using Ergon’s entry-level GravityControl Rubber compound. Key Features:2 grip diameters: Standard for glove size Large/X-Large (8.5-10.5) & Slim for glove sizes Small/Medium (6.5-8.5),Carbon friendly CNC Aluminium clamps,Intergrated end plugs,105g per pair (Standard),90g per pair (Slim).
By using a combination of soft rubber with organic cotton, Brooks has produced grips which provide comfort for the hands and highly-efficient grip when you're changing direction. Also, as they are constructed around an alloy core and feature dual lockring, they're super-durable and will remain securely in place.
These grips are ergonomically shaped to fit the hand perfectly. This enables you to hold the grip less tightly, yet still have precise control. This reduces pressure points on the hands and reduces arm pump on long descents or day-long trail sessions. Inside the grip, there is a double-butted core that dampens the shock of sudden impacts and vibrations. Compatibility Available in three different size options to choose from, the Ergon grips GA3 are designed for a comfortable and dependable hold on the most demanding of terrains. The small size option is recommended for hand/glove sizes 6.5 to 8.5". The large size option is for hand/glove sizes 8.5 to 10.5". The difference in size refers to the grip width in inches, meaning a larger hand will have a more positive fit on a thicker grip, while a smaller hand is better fitted to a smaller grip. Both the small and large grips are the same size. There is finally a third option available that includes one standard-sized left-hand grip and one shorter-sized right-hand single-twist-shift grip that's developed for Nexus/Rohloff. Tech Tip: Although your flat handlebars may be 31.8mm or 35mm at the central stem clamping area, most flat bars have a standard 22.2mm diameter at the ends of the bars. These grips, as with most grips on the market, are designed for bars with this standard 22.2mm measurement at the end of the bars.
The integrated construction eliminates any movement between the grip section and the collars, which could otherwise develop over time. Millions of randomly aligned Kevlar particles are suspended in the base material. As the grip is used, more of these particles are exposed, resisting wear whilst retaining a soft and tacky feel.
Constructed to the same standard as the brand's renowned Dual-Ply grips, these components feature a knurled grip surface, emblazoned with specially-angled 3D Yeti logos to keep you holding on with confidence and composure. These ODI Yeti grips are a product you can count on.
Brooks England Cambium Comfort Handlebar GripsBrooks Cambium Comfort Grips offer the ideal balance of comfort, grip and contemporary looks to suit any urban dwelling hybrid or city bike. By combining soft rubber with organic cotton, Brooks has produced a set of grips that guarantee a comfortable ride for the hands and efficient grip as you quickly change direction. An alloy core and lock rings ensure lasting durability and that the grips stay securely in place.Features: Grip Material: Soft Rubber/Organic Cotton combination Alloy cores Locking end capsBuy Brooks Components from Chain Reaction Cycles. Ride. Eat. Sleep. Repeat.
Ergon GE1 Evo Factory GripsThe GE1 Evo Factory Grips build on the success of Ergon's GE1 model by offering an even softer compound for enhanced comfort and an anti-slip finish for extra grip. Designed using feedback from top Enduro World Series riders, these grips actively support a correct torso/forearm position when riding downhill. By rotating the grip area towards the steering axle by 8%, these grips ensure the elbows are raised outwardly for better control.Comfort That LastsIn addition to the comfort provided by the soft compound, the GE1 Evo's feature Ergon's patent-pending inner construction. This consists of a forged inner clamp with a fully integrated grip end that's connected to the inner core. This design provides a soft, vibration damping grip edge enabling your hand to grip right to the grip's edge, which removes pressure from the hand's sensitive outer ulnar nerve.Features: Material: GravityControl Rubber Clamps: Cold Forged Aluminium, CNC Machined, black anodised, carbon-friendly Replaceable bar end plugs Use: MTB, Enduro, Gravity, All-Mountain Size: Standard Option: For glove size Large/X-Large (8.5-10.5); Slim Option: For glove sizes Small/Medium (6.5-8.5) Weight: Standard: 105g (pair); Slim: 90g (pair)Buy Ergon Components from Chain Reaction Cycles. Ride. Eat. Sleep. Repeat.
ODI Ergon GE1 Evo Handlebar GripsEnjoy exceptional comfort and control when taking on the most aggressive terrains with the Ergon Evo Grips from ODI. Made using Ergon’s GravityControl rubber compound, each handlebar grip includes a slip-proof surface for a reliable and comfortable hold. Complete with a forged inner clamp and integrated grip end attached to the inner core, superb shock absorption and damping ensure a reliable grip whatever the terrain.Advanced Inner ConstructionErgon really has obsessed over every detail with these grips. In addition to the advanced compound and shape, there’s a patent-pending inner construction. This features a forged inner clamp and the inner core is connected to an integrated grip end. The reason Ergon adopted this design, was to increase the surface area for the hand right to the grip’s end, thus preventing pressure on the hand's outer nerves. This design also helps to dampen vibrations of sudden shocks and trail feedback.Features:Material: Gravity Control Rubber CompoundDefinition of Grip:Handlebar Compatibility: Enduro and Gravity ridingDiameter: 32mmClamp: Cold Forged Aluminium/ CNC machinedSingle or Pair: PairWeight: 110g (set)Buy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.