Our Hornet 1-bike rack is a small-scale revolution. We call it the “Smallest Bike Rack in the World” because it is. The Hornet is so compact that it fits into an included 9.5”x7”x4” zippered carrying case for easy storage and travel. The Hornet is far and away the most travel-friendly rack on the market, but it works equally well for everyday use. The Hornet is our first “leave-the-front-wheel-on” bike rack. It is designed to mount to the back window of any hatchback, SUV or minivan using two of SeaSucker’s powerful 4.5” vacuum cups (120lb rated pull-strength each) to hold the handlebars and hang a bike weighing not more than 35 lbs from the rear glass. Plastic ladder straps securely hold both road and MTB bars to the vacuum cups. As with all SeaSucker bike racks, the pump-action vacuum cups also allow the user to attach the rack in just seconds, making the Hornet one of the easiest and fastest racks to install. Simply pump the two vacuum cups onto the back windshield, close the ladder straps around the bars and you’re done. And when it comes time to remove it, the Hornet detaches just as quickly and breaks back down into its component parts for storage in its case. The Hornet also comes with a safety strap that loops around the bike’s steerer tube and into a sewn-in cam buckle. The strap’s tail has a built-in plastic peg that, when closed in the hatchback, secures the strap to the car. NOTE: this rack is intended for use on hatch-back style vehicles only, and should not be used on a surface that does not have at least a 45 degree angle from horizontal.
Aligning all forces to work for you An ultra-high performance handlebar constructed with Innegra fibers to ride the most punishing conditions. The new PRO Vibe handlebar is built to meet cycling’s highest demands using state of the art technology. The Vibe is developed with Di2 in mind offering ultimate integration for maximum aerodynamic performance and ultra-clean styling. Power of the pro At PRO we have a simple mission: To work together with the best people in the world to make the best products in the world. That’s why we work with the best riders, designers, engineers and The Shimano Dynamics Lab to co-create the products you use. The perfect match with Di2 PRO Vibe handlebars are made for the future and are therefore compatible with the new Shimano DURA-ACE R9100 Di2 junction box, which can sit at the end of either drop instead of a bar plug. The specially-positioned cable ports enable you to feed Shimano Di2 or mechanical shift cables and hydraulic or regular brake cables through the system. Constructed with innegra The carbon PRO Vibe handlebar series is constructed from high-performance Innegra fiber. The addition of Innegra fibers strengthens the bar’s most vulnerable areas without compromising its weight, so your handlebar is ready to ride the harshest conditions. Features: UD carbon construction Integrated brake- and shift- cable routing (Also for Shimano Di2) Anatomic and compact design
Improve your aerodynamics without breaking the bank. Geometry inspired by the bestselling VIBE Aero Carbon bars but engineered in lightweight and reliable AL 6066 Full internal-routing for Di2 or mechanical cables to maintain clean cockpit and aerodynamic benefits Minor flare to improve wrist clearance while in aggressive riding position 130mm drop and 78mm reach Weight: 330g
The DMR DeathGrip Flangeless is the second collaboration between DMR bikes and Brendog. ‘I wanted to make the ultimate grip to go on all my bikes: AM to DH. I combined the following features and the DeathGrip is what we ended up with!’ Brendan Fairclough. Tapered Core for Security. Waffle and Knurl for Grip. Mushroom for comfort. We started with an internally tapered single-lock core grip and wrapped Brendan's design around it in soft Kraton compound for the ultimate mountain bike handlebar grip. These DMR Grips are available in various colours, soft or firm. Tapered Core | No need for outer lock ring Waffle and Knurl for grip Mushroom for comfort Available in Thin (ø29.8) or Thick (ø31.3) Soft durometer of 20A for all colours, apart from Gum which is a harder but longer lasting 25A. 100g per pair
The GRAVEL100® model is an evolution from Deda famous ZERO100 road bar. Based on the RHM shape to maintain short reach, the 12° flare at the drops offers more stability and preserving the typical drop bar brake/shifter feel. the slightly aero top section is design to be ergonomic and to allow comfortable hand positions. this makes GRAVEL100® handlebar the best choice for gravel racing and riding. Features: Shape: RHM Rapid Hand Movement Material: Triple butted alloy 7075 Ø Handlebar: 31,7 mm Reach: 75 mm Drop: 130 mm Flare a°: 12° Sizes: 40 – 42 – 44 – 46 cm (width measured outside-to-outside at the lever position) Weight: 260 g (42 cm) Finish: black on black (BOB) note: wide center area for mounting accessories and Deda clip-on bar (parabolica and fastblack2)
Unrivalled lightweight control and durability Oversized 35mm clamping diameter for extra strength Robust, featherweight carbon fibre layup tuned for the perfect balance of stiffness and compliance Rise: 5mm Width: 740mm
The DMR DeathGrip Race Edition is the second collaboration between DMR bikes and Brendog. ‘I wanted to make the ultimate grip to go on all my bikes: AM to DH. I combined the following features and the DeathGrip is what we ended up with!’ Brendan Fairclough. Tapered Core for Security. Waffle and Knurl for Grip. Mushroom for comfort. We started with an internally tapered single-lock core grip and wrapped Brendan's design around it in super-soft Kraton compound for the ultimate mountain bike handlebar grip. These DMR grips are available in various colours, soft or firm. Super Soft 'RACE DAY' Compound | Secret Super-Tacky Formula Tapered Core | No need for outer lock ring Single Lock Ring | Torque to 2nM Waffle and Knurl for grip Mushroom for comfort Available in Thin (ø29.8) or Thick (ø31.3) 100g per pair
Easton's new AX series now includes the budget friendly EA50 AX flared drop bar. With the same MCD drop technology as Easton's top of the line road bars, flared to 16 degrees for comfort in the drops and control on gnarly terrain or long gravel assaults. It's time to take the road less travelled with EA50 AX. FEATURES FINISH: BLACK ANO / WATER TRANSFER GRAPHICS BAR WEIGHT: 325G (42CM) CLAMP DIAMETER: 31.8MM WIDTH (CENTRE-TO-CENTRE): 38-, 40-, 42-, 44-, 46CM FLARE: 16° REACH: 80MM DROP: 120MM MATERIALS: EA50 ALLOY
Experience lightness at the helm. The famous Superleggera handlebar in the new exclusive Limited Edition RS finish. Made from HR40 Carbon Fibre and a special resin that allows Deda to create a very compact composite, shaving off every excess gram of weight. This, combined with the new Superleggero RS stem results in an unbeatable weight. Features: Shape: RHM (Rapid Hand Movement) Material: Carbon HR40 Diameter: 31.7mm Reach: 75mm Drop: 130mm Weight: 180g (42cm)
Di2 internal cable routing compatible. Easton's new AX series line of bars meets the needs of the growing drop bar adventure and gravel segment. Building off the highly successful and critically acclaimed line of new MCD road bars and EA70 and EC70 AX bar utilizes the same top shape and reach as well as the ergonomic drop shape but turns up the drop flare from 4 degrees all the way up to 16 degrees. The wider stance in the drops provides more control on rough terrain and long gravel assaults. Why 16-degrees? Based on extensive testing and rider feedback we determined that 16 degrees was the perfect balance of maximum bar flare that still allowed for efficient access and usage of the shifters and brakes in both the hoods and drops. Features: Width (C to C) - 40, 42, 44cm at hoods (at drops +68mm). Flare - 16 degrees. Weight - 42cm 220g. Clamp Diameter - 31.8mm. Reach - 80mm. Drop - 120mm. Material - EC70 Carbon. Di2 internal cable routing compatible.
Zipp Service Course SL 80 Ergo handlebar is all about making you faster in style and comfort. The bar offers an 80mm reach and 125mm drop, perfect for a rider looking for a medium reach and shallow drop who likes reaching down to, rather than into, the drops. This bar has a flattened top and 3° backsweep for a neutral wrist position on the tops. The bars feature a 7° ramp angle for a flat transition to the hoods and a 4° outsweep at the drops. In addition to the ergonomic benefits, the Service Course SL 80 Ergo is our first ergo bar to be clip-on compatible. Made of 7050 aluminum, the Service Course SL 80 Ergo weighs 275g for a 42cm-wide bar. Light weight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types. Features: Distinctive Zipp cosmetics 7050 aluminum for light weight and durability 80mm reach and 125mm drop for a medium-high position Flattened top shape with 3° backsweep for comfort Clip-on Compatible (40, 42, 44cm sizes only) Di2® RS910 junction compatible Matte Black nano blast aluminum ISO 4210 compliant. See Declaration of Conformity for details. Lifetime warranty
The DMR Sect bike grip is the perfect Street, Park and Dirt jump grip. DMR took the classic mushroom design and added a thumb patch where previous mushroom grips wear-out first. Then also took out the bulge at the end of our DMR Sect grips so you can catch the bars right at the end of the grip and still finish the line.