The clip mechanism includes four-sided entry, superior mud shedding ability, and a customisable release angle making the crankbrothers Candy 3 an incredibly versatile set of pedals that excel in all conditions. Features: Ribbed body for better traction when unclipped Four-sided entry and superior mud shedding Customisable float & release angle Hex alloy end cap for enhanced durability Premium bearings & double seal system Snap-on traction pad technology to customise and optimise the shoe/pedal interface (available separately)
The crankbrothers candy is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 304g per pair Spindle: Forged scm435 chromoly steel Body: 2 piece machined aluminium Wings: Cast Steel Spring: 300 series stainless steel Inner bearing: Needle Outer bearing: Cartridge Maximum rider weight: No restrictions Colour options: Black/Silver Blue/Silver or Red/Silver You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). As with the rest of the crankbrothers range the pedals are fully serviceable with a level 3 / 11 service kit (product code CRB-11730). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
There is an ongoing debate amongst many riders about which is best, candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab, jump off the bike or quickly get clipped in again and put the power down. Crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit. The crankbrothers Candy 7 pedals are tough enough to deal with whatever is thrown at them. Q-Factor: 52mm Inner Bearing Type: Igus LL-glide bearing Outer Bearing Type: Enduro cartridge bearing Endcap: Hex Alloy Cleat: Premium brass cleats with shims included Spindle material: Forged SCM 435 Chromoly Steel Body Material: 6061-T6 Aluminum Wing Material: 17-4PH Stainless Spring Material: 300 Series Stainless Steel
crankbrothers Candy 7 Clip-In PedalsDesigned to increase your pedalling power, these Clip-In Pedals by crankbrothers offer a stable platform that is suitable for use with a variety of cycling disciplines including Mountain Bike (MTB), trail and cyclocross (CX).There is an ongoing debate amongst many riders about which is best, candy or eggbeater. The candy pedal provides an additional platform that is confidence-inspiring and also gives some support for those moments when you’ve unclipped but is unsure if you need to get your foot down for a dab, jump off the bike or quickly get clipped in again and put the power down.Crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.Features:Spindle Material: Forged SCM 435 Chromoly (CrMo) steelBody Material: 6061-T6 aluminiumWing Material: 17-4PH stainlessSpring Material: 300 series stainless steelQ-factor: 52mmCleat Type: Premium brass cleats with shims includedInner Bearing Type: Igus LL-glide bearingOuter Bearing Type: Enduro cartridge bearingEndcap: Hex alloyWeight: 320g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Candy 7 Clip-In PedalsDesigned to increase your pedalling power, these Clip-In Pedals by crankbrothers offer a stable platform that is suitable for use with a variety of cycling disciplines including Mountain Bike (MTB), trail and cyclocross (CX).There is an ongoing debate amongst many riders about which is best, candy or eggbeater. The candy pedal provides an additional platform that is confidence-inspiring and also gives some support for those moments when you’ve unclipped but is unsure if you need to get your foot down for a dab, jump off the bike or quickly get clipped in again and put the power down.Crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.Features:Spindle Material: Forged SCM 435 Chromoly (CrMo) steelBody Material: 6061-T6 aluminiumWing Material: 17-4PH stainlessSpring Material: 300 series stainless steelQ-factor: 52mmCleat Type: Premium brass cleats with shims includedInner Bearing Type: Igus LL-glide bearingOuter Bearing Type: Enduro cartridge bearingEndcap: Hex alloyWeight: 320g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Candy 7 Clipless MTB PedalsDesigned for competition use but excellent for all-round use, the crankbrothers Candy 7 Clipless MTB Pedals feature a clip mechanism that includes four-sided entry, superior mud shedding ability, and a customisable release angle.Durable Body with Increased Service LifeSpecial attention to detail has been paid to create an especially durable body with chamfered edges to reduce the chance of rock-strikes. The wings and springs of the pedals are made from Stainless Steel to resist corrosion and improve durability. Even the end cap has a bash guard to increase the service life of the pedals.Features: Body Material: 6061-T6 Aluminium Spindle Material: Forged scm 435 CrMo Spring Material: 300 series Stainless Steel Wing Material: 17-4PH Stainless Steel End cap: Hex alloy Bearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearing Cleats: Premium Brass cleats with shims included Q-Factor: 52mm Release Angle: 15°/20° Integrated traction pad technology to optimise the shoe/pedal interface Ribbed body for better traction when unclipped Chamfered edges to reduce rock-strikes Four-sided entry and superior mud shedding Customisable float & release angle Hex alloy end cap and bashguard Premium bearings & double seal systemWeight: 320g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers Carl and Frank were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated…. It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The candy 7 pedal is a clipless pedal with a platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. The pedal body is 10% larger than the level 1 2 and 3 pedal bodies. The chamfered edges help to minimise rock strikes. There is an ongoing debate amongst many riders about which is best candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab jump off the bike or quickly get clipped in again and put the power down. Excellent mud-shedding: the design is very open. Ribbed body for extra traction when unclipped 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Chamfered edges help reduce rock strikes Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). candy 7 Weight (per pair) 320g Spindle Forged scm 435 chromoly steel Body 6061-T6 aluminium Wings 17-4PH stainless Spring 300 series stainless steel inner bearing Igus LL-glide bearing outer bearing Enduro cartridge bearing Cleats premium brass cleats included release angle 15° or 20° Warranty 5 years
Each clip contains various sized sleeves to suit your needs (1mm, 2mm, or 3mm)
crankbrothers Clipless Mountain Bike Pedal Cleat KitMaking sure you easily get to grips with clip-in pedals, this handy set from Crank Brothers is designed with aspiring riders in mind. eEquipped with a 10° release angle for simple removal, these brass-built cleats work with all Crank Brothers clip-in pedals as well as 2-bolt pattern MTB shoes. Coming complete with bolts and shims, this is the ideal set to get you pedalling with confidence and composure. Features:Material: BrassRelease Angle: 10°Includes: 1 pair + bolts and shimsWeight: 30g per pair Buy Crank Brothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Clipless Mountain Bike Pedal Cleat KitMaking sure you easily get to grips with clip-in pedals, this handy set from Crank Brothers is designed with aspiring riders in mind. eEquipped with a 10° release angle for simple removal, these brass-built cleats work with all Crank Brothers clip-in pedals as well as 2-bolt pattern MTB shoes. Coming complete with bolts and shims, this is the ideal set to get you pedalling with confidence and composure. Features:Material: BrassRelease Angle: 10°Includes: 1 pair + bolts and shimsWeight: 30g per pair Buy Crank Brothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Sleeves snap on to the next gen candy and eggbeaters to tighten the interface between the shoe and pedal. Includes: 1mm 2mm 3mm sleeves Compatible with candy and eggbeater 11 3 and 2
Choose to ride flat or clipped in. The new double shot is crankbrothers hybrid pedal designed half flat / half clip-in. Moulded traction pins and diamond plate area provide grip and support. Excellent mud-shedding: machined pedal body helps further prevent mud clogging. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers and Enduro bearings. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. Specification Weight (per pair): 331g Spindle: Forged scm 435 chromoly steel Body: Composite Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Igus LL-glide bearing Outer bearing: Enduro cartridge bearing Cleats: premium brass cleats included Pins: Moulded traction pins Release angle: 15° or 20° Warranty: 5 years