The DMR V8 Classic is reborn. Featuring the much-loved original V8 shape, the V8 Classic now runs on dual DU bushes to give long lasting, super smooth performance.The new V8 Classic also features our original DMR logo.Corner pins can still be tuned for preferred grip (terror pins available separately) and service kits are available.Specification:90mm length x 94mm width platform area.,20mm depth.,CroMo axle.,Dual DU bush.,20 pins per pedal (8 removable).,520g per pair.,.
Steel pedal washers designed to help protect your aluminium crank arms from scratches and damage during pedal installation..Fits most aluminium cranks.
Choose to ride flat or clipped in. The new double shot is crankbrothers hybrid pedal designed half flat / half clip-in. Key Features:Moulded traction pins and diamond plate area provide grip and support. ,Excellent mud-shedding: machined pedal body helps further prevent mud clogging. ,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). ,Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers and Enduro bearings. It performs in even the most adverse conditions out on the trails. ,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal..Specifications:Weight (per pair): 331g,Spindle: Forged scm 435 chromoly steel,Body: Composite,Wings: Stamped steel,Spring: 300 series stainless steel,Inner bearing: Igus LL-glide bearing,Outer bearing: Enduro cartridge bearing,Cleats: Premium brass cleats included,Pins: Moulded traction pins,Release angle: 15° or 20°,Warranty: 5 years.
Our new Base Pedals deliver biting traction, and at pricepoint that doesn't hurt.Drawing from the pin layout on our first LG1 Plus and LG1 Race pedals, our newest Base composite pedals use the exact same 22-pin pattern in order to achieve the same biting traction our first pedals were so well known for.The 100 x 110mm composite platform houses the 22 pins (11 per side), an inboard bushing + outboard bearing, and steel axle. This combination spins smooth, and will last for years to come.
Lots of foot huggin lovin and a natural connection to your bike...,Dual concave platform design,VP-AIM (VP-503) was developed with input from both top free riders and local soul riders,Delivers the right feeling of control and security at the right price,t’s still thin, it’s still stylish, and it can take all the beating that you can give it and keep rolling on.
Trekking / Urban / City use,One piece PP body,7mm boron steel,Ball bearings, extended cup,107 x 100 x 24mm,Weight: 300g per pair,Fineline reflector included.
THE NEW EPB SYSTEM. The low cost solution. VP’s new EPB (economic polymer bearing) System replaces loose ball bearings with specially engineered polymer bearings. This system allows VP to create a more simple, thinner, and lighter pedal for entry level applications. VP pioneered the use of polymer bearings many years ago and now the same proven high-end technology is available as a cost-reducing OEM solution. VP EPB Advantages:Reduced cost due to all in-house production and automatic assembly,Reduced weight,Thinner bodies,Fewer moving parts,Adjustable bearing pre-load,Easily serviced . MTB / Trekking use,One-piece aluminium,EPB System,Size 95mm x 66mm,Weight: 290g per pair .
THE NEW EPB SYSTEM.The low cost solution. VP’s new EPB (economic polymer bearing) System replaces loose ball bearings with specially engineered polymer bearings. This system allows VP to create a more simple, thinner, and lighter pedal for entry level applications. VP pioneered the use of polymer bearings many years ago and now the same proven high-end technology is available as a cost-reducing OEM solution. VP EPB Advantages:Reduced cost due to all in-house production and automatic assembly,Reduced weight,Thinner bodies,Fewer moving parts,Adjustable bearing pre-load,Easily serviced . Material PP resin ,Cage aluminium ,Axle 7mm boron steel,EPB System ,Size 103mm x 64.5mm ,Weight 235g per pair .
Money-to-weight this is probably the best value item you can buy it you want to save weight on your bike.,Now available in Powdercoated Black, new Pearl White, XTR Grey, orange, purple or green colour.,These sealed bearing pedals have an original DX feel but have a slightly larger surface area.,Pins are replaceable.,Light magnesium body, although not a strong as aluminium. If you break pedals or do pedal grinds we'd advise an alloy pedal instead.,These pedals are amazingly light - they weigh less than half the weight of Primo Super Tenderizers.,9/16" (for 3 piece cranks) only..
Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform.Key Features: Release angle: 15° to 20°,Cleat: Premium brass cleats included,Warranty: 5 years,Weight: 435g per pair,Platform: Two piece aluminium + composite,Wings: Investment cast steel,Spring: 300 series stainless steel,Spindle: Forged scm435 chromoly steel,Inner bearing: Needle,Outer bearing: Cartridge,Traction pins: 8mm adjustable.
The world’s most successful downhill / race pedal just got even better! Dual-chamfered edges reduce costly rock strikes, and combined with proven traction pad technology Mallet DH maximises your performance. Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform. Mallet DH are the clipless pedal of choice by most Pro World Cup riders.The ability to set the release angle of the cleats to either 15° to 20° means you can be really active on the pedal whilst still remaining attached to the bike. The concave pedal body gives a flat pedal feel with the assurance that you are connected to the bike.Key Features:Release angle: 15° to 20°,Cleat: Premium brass cleats included,Warranty: 5 years,Weight: 479g per pair,Platform: Extruded/machined aluminium,Wings: cast stainless steel,Spring: 300 series spring stainless steel,Spindle: Forged scm435 chromoly steel,Q-factor: 57mm,Inner bearing: igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails,Outer bearing: enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal,Traction pins: 8mm adjustable,Excellent mud-shedding: using the very open designed pedal platform,Dual chamfered edges to reduce rock strikes,Ribbed body for extra traction when unclipped,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal,Extremely lightweight: pedal design is very simple with only a few key parts,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately,crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle.
Crankbrothers entry price point flat pedal offering the same optimal surface area with small and large pedal platform options.Key Features:Minimal 13mm thickness,9 metal pins per side for grip,Premium bearings and seal system,Stamp small recommended for size 37-43 shoes,Stamp large recommended for size 43-49 shoes,.Technical Specs:Pins - 9 per side mounted from the back,Body Material - Composite,Footprint - 100mm x 100mm small / 111mm x 114mm large,Inner bearing - IGUS LL Glide Bearing,Outer bearing - Enduro cartridge bearing,Spindle - 52mm forged 435 chromoly steel,Warranty - 5 years,Weight - 329g per pair.