Performance The concave pedal platform offers a more secure foothold. Like its downhill (DH) equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. The ribbed body on these crankbrothers Mallet E LS mountain bike (MTB) pedals allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design also provides excellent mud shedding. 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal. Fit Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately. Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Durability The outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. Maintenance It is good to know that crankbrothers Mallet E LS Pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.
Features: Minimal and lightweight Four-sided entry and superior mud shedding Customisable float & release angle Hex alloy end cap Premium bearings & double seal system
Shimano M828 Saint Mountain Bike Flat PedalsWith their large aluminium 105x109mm bodies, adaptable gripping pins and tough Chromoly (CrMo) axle, the M828 Saint flat mountain bike (MTB) pedals give you excellent foot stability and trail-ready toughness. Shimano has installed longer pins at the edges, so the more of the natural curve of your feet touch the pedals. These smooth operating pedals also come with two pin length options, so you can personalise the grip to suit your footwear and your riding style.Features: Body Material: Aluminium Axle Material: Chromoly (CrMo) Axle Size: Standard 9/16" thread Bearing Type: Sealed cartridge bearings Use: All Mountain, Enduro, Downhill Pins: 12 adjustable pins per side Platform Size: 105x109mmSpare Pins Included: Yes, 2 pin length options (long & short) for customisable feelSingle or Pair: Pair Superior grip for aggressive gravity riding Virtual concave with 5mm pins at the edge and 4mm pins in the centre Slimmer axles save weight without sacrificing strengthWide platform for more support and gripDurable, yet slimmer CrMo spindle with 8mm hex wrench mountManufacturer's Part Number: PD-M828 Weight: 533g (pair)Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers MTB Pedal Upgrade Kit - Titanium SpindleThis crankbrothers Pedal Upgrade Kit enables you to upgrade your favourite Eggbeater, Candy, Mallet, 5050 or Double Shot pedals to titanium spindles for a drastically reduced weight and extra strength. It also comes with a full refresh kit, which includes new bearings and seals so you can get them performing like they've just come out of the box.Features: Spindle Material: 6al/4v Titanium Q-Factor: 52mm Compatiblity: Eggbeater Candy Mallet 5050 Double Shot (model years 2010-present)Contents: 1 pair titanium spindlesEnduro catridge bearingsIgus ll-glide bearings Dss double seal system: internal and external seals Hex alloy end caps O-rings, nuts, and sleeve bushings Bearing removal tool Maximum Rider Weight: 90kg/200lb Weight: 60g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Designed to offer you much-increased foot support, comfort and a superior feel, these components feature a unique virtual concave pin design. This consists of 5mm long grip pins at the edge and 4mm pins in the centre to help your foot to be more secure when cornering or putting the power down. Another major improvement is the slimmer CrMo axles, which cut down the overall weight without reducing the strength of these Shimano Saint flat pedals.
Choose to ride flat or clipped in. The new double shot is crankbrothers hybrid pedal designed half flat / half clip-in.Moulded traction pins and diamond plate area provide grip and support. Key Features:Excellent mud-shedding: machined pedal body helps further prevent mud clogging.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. ,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal..
crankbrothers Candy 3 Clipless Mountain Bike PedalsWith a lightweight aluminium platform built to resist rock strikes, stainless steel wings and alloy end caps with hex fitting, the Candy 3 Clipless pedals have been designed with durability in mind. The crankbrothers Shimano Pedalling Dynamics (SPD) system connects from four sides, has superior mud-shedding ability and a customisable release angle. The Candy 3 are an incredibly versatile set of pedals that excel in all conditions.Features:Body Material: 6061-T6 AluminiumSpindle Material: Forged SCM435 Chromoly (CrMo)Spindle Size: Standard 9/16"Spring Material: 300 series Stainless-SteelWing Material: 17-4PH Stainless-SteelEnd Cap Material: Hex alloyBearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearingCleats: Premium Brass Shimano Pedalling Dynamics (SPD) cleats with shims (included)Q-Factor: 52mmRelease Angle: 15°/20°Ribbed body for better traction when unclippedFour-sided entry and superior mud sheddingCustomisable float & release angleHex alloy end cap for enhanced durabilityPremium bearings & double seal systemSnap-on traction pad technology to customise and optimise the shoe/pedal interface (available separately)Weight: 340g (pair)Buy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Eggbeater 3 MTB Pedals - Electric BlueThe crankbrothers Eggbeater 3 MTB Pedals provide the superior mud shedding ability, customisability and ease-of-use of crankbrothers' four-sided entry clip mechanism in a beautifully minimal, seriously lightweight package.Features: Body Material: Cast Stainless Steel Spindle Material: Forged scm 435 CrMo Spring Material: 300 series Stainless Steel Wing Material: 17-4PH Stainless Steel End cap: Hex alloy Bearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearing Cleats: Premium Brass cleats with shims included Q-Factor: 52mm Release Angle: 15°/20° Minimal and lightweight Four-sided entry and superior mud shedding Customisable float & release angle Hex alloy end cap Premium bearings & double seal systemWeight: 280g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The T1-SX BMX pedal offers excellent spring tension and feel. Unclipping under maximum load is a thing of the past with the T1-SX's hook plate techology. EVO+ bearing system featuring IGUS bushings keeps these pedals running smoothly. ###section### Product Specs TYPE/FITS: 9/16 - 3pc MATERIAL: Metal BEARINGS: Sealed PACK SIZE: Pair WEIGHT: 370 g
crankbrothers Eggbeater 3 MTB PedalsThe Eggbeater 3 pedal provides the form and function of Crank Brother's exclusive four-sided entry, at a price that allows you to outfit any bike.Features: Cast stainless body and spring with steel spindle add strength and stability without a weight penalty Low-profile design delivers a more powerful and efficient pedal stroke 6° of knee-saving float with a 10° release angle gives you a customised fit for the trail 10mm needle bearing inner and cartridge bearing outer Aluminium end cap Brass cleat and mounting hardware included Weight: 278g (pair)Buy crankbrothers Componentsfrom Chain Reaction Cycles, the World's Largest Online Bike Store.
The all new Atlas Pedal, ideal for Downhill, Enduro, All-Mountain and eMTB. Same Atlas burliness. Sleek new body design.Key FeaturesWide, thin, and concave alloy pedal body offers superior stability and comfort.,Platform: 110mm x 108mm | Body: 12mm thick.,Cro-Mo axle rolls smooth on oversized cartridge bearings and bushings.,Traction aplenty thanks to ten, adjustable bottom loading pins per side.,Multiple colour options available.,Weight: 376 grams..