The DMR V8 Classic is reborn. Featuring the much-loved original V8 shape, the V8 Classic now runs on dual DU bushes to give long lasting, super smooth performance. The new V8 Classic also features our original DMR logo. Corner pins can still be tuned for preferred grip (terror pins available separately) and service kits are available. 90mm length x 94mm width platform area. 20mm depth. CroMo axle. Dual DU bush. 20 pins per pedal (8 removable). 520g per pair.
FEEL THE NEW X-PERIENCE LOOK constant desire to innovate and improve your product experience has resulted in a design that is dependable, durable and easy to use. Our new mountain-bike pedal was constructed around a heavy-duty mechanism, is resistant to the negative effects of coming into contact with various external factors (rocks, roots, mud…), and provides consistent and reliable performance over time. Its spindle, equipped with a double weather-resistant seal, has been improved to withstand even the worst conditions you may encounter during your rides. We have remained devoted to the principles that guide us daily. Fewer hassles mean more time to ride, and therefore, more fun. TECHNOLOGY THE BEST POWER TO WEIGHT RATIO All the energy you produce is transferred to your MTB through your pedals. Their role, is therefore, crucial. LOOK’s objective in this new undertaking was to find solutions that would enable the most efficient transfer of rider power possible. That is why LOOK has chosen to place the weight/contact surface ratio as the primary factor when defining the product. Generally speaking, the greater the contact surface, the more efficiently energy is transferred. On the other hand, the greater the contact surface, the more the pedal will weigh. The challenge faced by our engineers was therefore, to identify the zones that are useful for energy transmission and then optimize the pedal design in order to limit any that are unused. This task allowed LOOK to engineer a pedal with the best weight / contact surface ratio on the market. LATERAL CONTACT SUPPORT Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support. MECHANISM GEOMETRY The mechanism works regardless of external conditions (in the mud, forces are significantly different from those encountered when dry), more space allows for the shedding of various foreign matter (mud, sand…). These zones give the user a constant and stable feeling of being securely clipped in, in all conditions. ADJUSTABLE TENSION An adjustable tension screw allows you to fine-tune the entry/release resistance to your personal skill level. Specifications: USE: XC Competition and Leisure TENSION: 6 to 14 BODY: Carbon SPINDLE: Titanium FLOAT: 6° PLATFORM MATERIAL: Chromoly PLATFORM AREA: 515 mm² PLATFORM WIDTH: 60 mm STACK HEIGHT + CLEATS: 16,8 mm WEIGHT PEDAL: 150 gr WEIGHT PAIR + CLEATS: 404 gr GUARANTY: 2 years
The DMR Vault pedal is a tuneable MTB flat pedal designed specifically for riders who want a bigger platform. Equally at home on an all mountain or downhill setups, the DMR Vault pedal offers great stability and grip for the bumpiest of trails 105mm x115mm Platform 430g per pair 17mm concave foot bed Extruded 6061 Aluminium and 4140 Cro-mo Steel axles (9/16 ) 11 pins per pedal. Flip the pins to fine-tune the grip High load DU bush and cartridge bearing
A heavy duty pedal wrench for serious workshop use. Key Features: A heavy duty pedal wrench for serious workshop use. Two 15 mm openings are orientated at 30 degree and 45 degree angles to ensure that you have the best mechanical advantage. The tubular section handle will resist flexing and it is vinyl dipped for comfort and a secure grip. Provides enough leverage to loosen the tightest pedals. Made from Cr-Mo steel for the best strength and durability.
Upgrade your Rally RK100 to a dual-sensing power meter, and analyse more than just watts to see exactly how your pedalling style generates the force that moves you. When paired with Rally RK100, the upgrade pedal completes the Rally power meter system, providing left/right balance data and cycling dynamics. The power sensor is even transferable to Rally XC pedals so you can have power for your off-road rides. Revolutionary cycling dynamics display where you’re generating power throughout the pedal stroke and show left/right balance. See where you apply force on the pedal to ensure proper cleat position and track seated vs. standing to see how position changes efficiency. Compatible Devices: Rally RK100
The Garmin Vector 3 is the latest version of Garmin’s popular power meter pedals. As a pedal-based power meter with sensors housed inside the pedals, the Garmin Vector 3’s offer highly reliable data, which is accurate to +/-1%. In this dual-sided iteration, the Garmin Vector 3 gives you an exact, independent reading of each leg's power output. It even measures where power is being applied to the pedal, so you can ensure optimal cleat set up. One of the huge benefits of running a pedal-based power meter is the ease of set up. Without needing to exchange cranks, swap out wheels or chainrings, even the most basic mechanic can swap these pedals between bikes in minutes. With a lower stack height, these pedals also offer much more cornering clearance than the previous model, so you can sprint out of hairpins with confidence. While the stainless-steel spindle ensures the Vector 3’s last a long time, due to the composite pedal body, the Vector 3’s weigh just 316 grams per pair. Powered by coin-cell batteries which are easy to replace, the Vector 3’s offer 120 hours of riding. Being a Garmin product, the Vector pedals are best combined with Edge computers and Forerunner watches. However, as a fully ANT+ and Bluetooth capable power meter, you don’t have to worry about integrating the Vector 3 power meter with other ANT+ and Bluetooth compatible devices. Battery type: LR44/SR44 (x4) Battery life: 120 hours Weight: 316 g Max. rider weight: 105 kg Accuracy: +/- 1.0% Cleat type: Keo Q-factor: 53 or 55 Stack height: 11.5 mm Cornering clearance: 31.7 Static friction: 1.9 Field calibration Adjustable release tension Garmin Connect™ Measurement location: spindle Communicaiton: ANT+® and Bluetooth® Installs like a regular pedal Included: Vector 3, Look Keo style cleat hardware, Documentation A Garmin HRM dual heart rate monitor measures your heart rate during training, so you can understand your body better, train more effectively and achieve greater results. Equipped with both ANT+ and Bluetooth technology, this heart rate monitor communicates with most bike computers and fitness watches, allowing you to keep a closer eye on your heart rate throughout your workout. The strap itself is incredibly comfortable, durable and adjustable so you can always find the perfect fit. All this technology is packed into a neat 59-gram package, helping to ensure your set up stays as light as possible. With an easily replaceable coin cell battery which lasts up to 3.5 years, you can always rely on your Garmin HRM dual heart rate monitor. Module: 62 mm x 34 mm x 11 mm Strap Length: 63.5 cm to 132 cm Weight: 54.4 g Water Resistance: 1 ATM* Battery: User-replaceable size CR2032 (3 volts) Battery Life: Approximately 3.5 years (based on average use of 1 hour per day) Operating Temperature: -5°C – 50°C Radio Frequency/Protocol: 2.4 GHz ANT wireless communications protocol; BLUETOOTH® Wireless Technology 5.0 Range: 3 m System Compatibility: ANT+, Bluetooth
An eye-catching streamline silhouette that is a Birzman signature design, this 15mm wrench is used for the installation and remove of pedals. Specification Functions: 15mm pedal wrench. Material: K5 steel / TPR.
Step Right Up Designed with future shredders and novice riders in mind, the Ride pedal sports a durable nylon composite body with 18 molded traction studs to provide solid footing while being kinder and gentler on your shins should you slip up.
Step Right Up Designed with future shredders and novice riders in mind, the Ride pedal sports a durable nylon composite body with 18 molded traction studs to provide solid footing while being kinder and gentler on your shins should you slip up.
Step Right Up Designed with future shredders and novice riders in mind, the Ride pedal sports a durable nylon composite body with 18 molded traction studs to provide solid footing while being kinder and gentler on your shins should you slip up.
Step Right Up Designed with future shredders and novice riders in mind, the Ride pedal sports a durable nylon composite body with 18 molded traction studs to provide solid footing while being kinder and gentler on your shins should you slip up.
The Best Of Both Metals The Aeffect pairs a thin, lightweight 6061-TI aluminum body with a cro-mo axel that runs our tried and true bearing and bushing set-up. Surefooted As A Mule You want traction? You got it. Bottom loading hex-head threaded pins give you all the bite and foot security you need. Your True Colors Shining Through Pick from three vibrant colors to compliment your build and your personal sense of style. Just don't choose wrong or they'll make fun of you. Get Up Stand Up Like a good trail dog, the Aeffect Pedal is most in its element on a flowy section of backwoods Nirvana. Designed with a smaller body, this strong, durable, rebuildable pedal is made to chase stoke all day long.