Alloy bodied pedal for MTB and BMX use. Removable pins provide customisable grip. Alloy body with removable pins Ball bearings CNC machined CroMo spindles 458g pr 9/16”
LOOK KEO 2 MAX PEDALS WITH KEO GRIP CLEAT RIDE AT YOUR BEST THE NEW KEO 2 MAX IS THE PRODUCT THAT WILL GIVE YOU THE CONFIDENCE YOU NEED TO GO BEYOND YOUR PERSONAL LIMITS. The LOOK design team has completely remodelled the shape of the KEO 2 MAX giving it a new slimmed down line yet a wider contact surface increasing its style and efficiency. TECHNOLOGIES OPTIMIZED CONTACT SURFACE The pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of the new KEO 2 MAX preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. We also sought to optimize power transfer thanks to its new 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep regardless of the position of your foot (depending upon the angular float you use) the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface without any additional weight gain improves the Power to Weight ratio making the product even better and allowing you to perform at your best. IMPROVED SPINDLE PROFILE The spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized «Chromoly Plus» steel axle it is composed of an axle with an inner ball bearing and a needle roller bearing located under the contact surface to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer previously used to hold the needle roller bearing in place has been replaced with a conical spacer. This technical solution reduces friction increases fluidity and by consequence decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability. SPECIFICATIONSUSAGE: Recreational to CompetitionBODY: CompositeAXLE: Chromoly +PEDAL STACK HEIGHT + CLEATS: 173 mmCONTACT SURFACE AREA: 500 mm²FLOAT: 8 or 12 adjustable springCLEATS: Kéo Grip CleatsPEDAL WEIGHT: 130 gr (328 gr per pair with cleats and screws)COLOURS: Black or WhiteACCESSORIES: A pair of Grey Kéo Grip cleats + screwsGUARANTY: 2 years
Time to take your eBike to the next level. With a pin layout inspired by our downhill pedals for maximum grip the ePedal is specifically designed for eBikes with its narrow profile for optimum cornering clearance. Compact cartridge bushings paired with a sealed bearing system keep things running smoothly for miles and miles. Topping it off is an electric design with full coverage laser etching on a premium finish. Body: CNC-machined 6061 Aluminum Axle: CNC-machined Cro-Mo Bearings: Ultralight compact bushings + sealed bearings Replaceable pins Size: 102mm x 108mm Weight: 170 grams (each) Dimensions: 11 x 20 x 7 cm
The flat pedal from crankbrothers is engineered to provide the optimal interface between shoe and pedal. The 13mm external and 11mm internal thickness on the level 7 stamp provide a low profile concave pedal body that your feet sit into. Adjustable pins allow the rider to fine tune the feel. The outsole profiles of the top mountain bike show brands were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43 and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated. Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected. 13mm external and 11mm internal thickness. 20 adjustable pins per pedal. 8mm in the centre of the pedal and 10mm on the outer edges. Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Small: 100mm x 100mm pedal body footprint Large: 114mm x 111mm pedal body footprint Available in red or black Specification Weight: 345g (Small) 375g (Large) Spindle: Forged scm 435 chromoly steel Body: Forged 6061-T6 Inner bearing: Igus LL-glide bearing Outer bearing: Igus LL-glide bearing Body dimensions: 100mm x 100mm (Small) 114mm x 111m (Large) Pins: 10 adjustable pins per side Warranty: 5 years
Crankbrothers entry price point flat pedal offering the same optimal surface area with small and large pedal platform options. Minimimal 13mm thickness 9 metal pins per side for grip Premium bearings and seal system stamp small recommended for size 37-43 shoes stamp large recommended for size 43-49 shoes Technical specs Pins - 9 per side mounted from the back Body material - Composite Footprint - 100mm x 100mm small / 111mm x 114mm large Inner bearing - IGUS LL Glide Bearing Outer bearing - Enduro cartridge bearing Spindle - 52mm forged 435 chromoly steel Warranty - 5 years Weight - 329g per pair
Value for money dual-sided light action SPD pedal perfect for road touring. Double sided light action SPD design aids frequent entry and release The large integrated cage provides excellent pedal to shoe contact increasing stability and control Sealed cartridge bearing spindle keeps out water and mud for a smooth action and makes for a durable pedal Adjustable entry and release tension settings Chrome-moly spindles for added durability SM-SH56 multi directional release cleat included Weight: 442 grams per pair
SPD-SL road pedal for high performance road racing. Designed to match the 105 11-speed group. Wide lightweight carbon body provides large shoe contact area to maximise power transfer and support whilst reducing weight Low profile design increases road clearance for increased confidence when slicing through corners Large binding target allows quick engagement while wide cleats provides more efficient pedalling Stainless steel pedal body plate for increased durability Open design allows for easy access and cleat adjustment Low maintenance sealed cartridge axle unit Comes with SH-SH11 shoe cleat yellow which provides 6 degree of sideways float Weight: 285 grams per pair
The world’s most successful downhill / race pedal just got even better! Dual-chamfered edges reduce costly rock strikes and combined with proven traction pad technology Mallet DH maximises your performance. Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform. Mallet DH are the clipless pedal of choice by most Pro World Cup riders. The ability to set the release angle of the cleats to either 15° to 20° means you can be really active on the pedal whilst still remaining attached to the bike. The concave pedal body gives a flat pedal feel with the assurance that you are connected to the bike. Release angle: 15° to 20° Cleat: Premium brass cleats included Warranty: 5 years Weight: 479g per pair Platform: Extruded/machined aluminium Wings: cast stainless steel Spring: 300 series spring stainless steel Spindle: Forged scm435 chromoly steel Q-factor: 57mm Inner bearing: igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails Outer bearing: enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal Traction pins: 8mm adjustable Excellent mud-shedding: using the very open designed pedal platform Dual chamfered edges to reduce rock strikes Ribbed body for extra traction when unclipped 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal Extremely lightweight: pedal design is very simple with only a few key parts Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle
Size specific enthusiast-level platform pedal provides optimal shoe/pedal interface. Details Optimal surface area Minimal profile 16mm thin 10 adjustable pins per side for grip Premium bearings & seal system Stamp small recommended for shoe sizes: 4-9 (UK) // 37-43 (eu) Stamp large recommended for shoe sizes: 9-14 (UK) // 43-49 (eu) Specs adjustable pins 10 per side body material A380 Aluminum endcap T15 footprint small size footprint large size 100mm x 100mm 114mm x 111m inner bearing type Igus Bearing max rider weight No restriction outer bearing type Double Cartridge Bearing shoe size US 5-10 // EU 37-43 spindle material Forged SCM 415 Chromoly Steel warranty 5 years weight small weight large 439g per pair 494g per pair
FEEL THE NEW X-PERIENCE LOOK constant desire to innovate and improve your product experience has resulted in a design that is dependable durable and easy to use. Our new mountain-bike pedal was constructed around a heavy-duty mechanism is resistant to the negative effects of coming into contact with various external factors (rocks roots mud…) and provides consistent and reliable performance over time. Its spindle equipped with a double weather-resistant seal has been improved to withstand even the worst conditions you may encounter during your rides. We have remained devoted to the principles that guide us daily. Fewer hassles mean more time to ride and therefore more fun. TECHNOLOGY THE BEST POWER TO WEIGHT RATIO All the energy you produce is transferred to your MTB through your pedals. Their role is therefore crucial. LOOK’s objective in this new undertaking was to find solutions that would enable the most efficient transfer of rider power possible. That is why LOOK has chosen to place the weight/contact surface ratio as the primary factor when defining the product. Generally speaking the greater the contact surface the more efficiently energy is transferred. On the other hand the greater the contact surface the more the pedal will weigh. The challenge faced by our engineers was therefore to identify the zones that are useful for energy transmission and then optimize the pedal design in order to limit any that are unused. This task allowed LOOK to engineer a pedal with the best weight / contact surface ratio on the market. LATERAL CONTACT SUPPORT Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support. MECHANISM GEOMETRY The mechanism works regardless of external conditions (in the mud forces are significantly different from those encountered when dry) more space allows for the shedding of various foreign matter (mud sand…). These zones give the user a constant and stable feeling of being securely clipped in in all conditions. ADJUSTABLE TENSION An adjustable tension screw allows you to fine-tune the entry/release resistance to your personal skill level. FEATURESUSE: XC Competition and LeisureTENSION: 6 to 14BODY: CarbonSPINDLE: Chromoly +FLOAT: 6°PLATFORM MATERIAL: ChromolyPLATFORM AREA: 515 mm²PLATFORM WIDTH: 60 mmSTACK HEIGHT + CLEATS: 168 mm (107 + 61 mm)WEIGHT PEDAL: 170 gWEIGHT PAIR + CLEATS: 444 gGUARANTY: 2 years
The Orbitron is the new gold standard for platform pedals. The high grip layout features 16 pins per side on an ultralight alloy low-profile body. Beautifully machined axles paired with premium bearings and bushings keep you flowing. CNC-Machined 6061 Aluminum CNC-machined Cro-Mo Axel Ultralight Compact Bushings + Sealed Bearings Replaceable Pins Weight: 0.4 kg Dimensions: 11 x 20 x 7 cm
Classic pedal design with strong CNC machined CroMo spindles. Polished aluminium body Ball bearings CNC machined CroMo spindles 250g pr 9/16” Note: This pedal comes with a black cage as shown in the photos.