The crankbrothers candy is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. The trade up from level 1 pedals is the 2 piece machined aluminium pedal body and increased warranty to 5 years. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 324g per pair Spindle: Forged scm435 chromoly steel Body: 2 piece machined aluminium Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Orange/Silver or Silver You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Look has optimised the pedal shape and size to obtain the perfect balance between the contact surface area and weight. This pedal features an exceptionally, modern and performance orientated design that provides superb comfort and as it is equipped with advanced weather seals; it is extremely durable and reliable. To expand this pedal design usage further, it has fully adjustable cleat tension, enabling you to fine-tune the contact and release feel and to set them up to suit how you like to ride.
Dual-sided pop-up bindings position the pedal body at 12.5-degrees angle for easy and fast entry, with adjustable cleat tension and indicators to show tension for each side. The strong aluminium body of these Shimano DX Pedals is complemented by a super-strong and durable chromoly (CrMo) spindle while the open design serves to shed mud for a superb, self-cleaning experience.
The new Vault Mag MTB pedal is here, born from our quest for production methods that are more environmentally friendly and less wasteful. Thanks to the unique use of pressure die casting technology, the Vault Magnesium achieves these goals. Best of all, it is now available at a more obtainable price. When performance is paramount, the Vault Mag flat pedal delivers at just 404g. Key Features:ED Painted black finish only.,Tried and tested at pro level.,17mm concave footbed.,Cro-Mo Axle.,High Load DU bush system.,Cartridge Bearings.,404g per pair.,Replaceable steel pins..
DMR Vault Mag Flat Mountain Bike PedalsFeaturing a lightweight magnesium body construction, this high-quality mountain bike (MTB) pedal is ready for all the challenges you're met with on your off-road trail adventures. Born out of DMR's quest for production methods that are more environmentally friendly and less wasteful, this model's unique use of pressure die casting technology means its manufacturing process uses less energy, has zero waste, and uses magnesium extracted from seawater. Trail-Ready MTB Pedal with CrMo AxleDMR has equipped this version with rock-solid chromoly (CrMo) steel rails, so riders can benefit from durable and reliable pedalling performance on the most demanding of terrain conditions. With a 17mm concave footbed, replaceable steel pins and a high load DU bush system, this is a great choice of upgrade for riders who want a dependable set of pedals while also caring for the environment.Please Note: Torque setting at the Axle to Crank, for all the DMR Bikes pedal range, is 40 - 55Nm.Features: Body Material: Magnesium Axle Material: Chromoly (CrMo) Steel Finish: ED painted black finish Use: MTB Type: Flat pedal Platform Size: 105x105mm High Load DU bush system 17mm concave footbed Replaceable Steel pins Single or Pair: Pair Weight: 404g (pair)Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
These exclusive pedals are built around the established design of DMR's top-selling V8 and V12 models. With their tough CrMo (Chromoly) axles and extruded 6061 aluminium platforms, they are both durable and low in weight. Coming equipped with an exclusive design that features copper pins, this model offers a dependable performance as you weave between the mountain bike trails at speed. Tough Downhill Flat Pedals This model's tough construction means you can confidently take on the biggest jumps and be certain that they can withstand the landing. They also offer excellent grip, foot stability and clearance, thanks to the 11 pins per pedal, concave-shaped footbed and thin 17mm profile.
The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 280g per pair Spindle: Forged scm435 chromoly steel Body: cast stainless steel Wings: stamped stainless steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Special edition colours: Silver/Black You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). They come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). You may also like to run the pedals on your road / commuter bike. Buy a set of Quattro cleats (CRB-15289) to use on your road shoes. It makes pulling off from junctions a breeze as you have 4 points of entry to the pedals. As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform. Release angle: 15° to 20° Cleat: Premium brass cleats included Warranty: 5 years Weight: 428g per pair Platform: Two piece aluminium + composite Wings: Stamped steel Spring: 300 series stainless steel Spindle: Forged scm435 chromoly steel Inner bearing: Bushing Outer bearing: Cartridge Traction pins: 8mm adjustable
XT trekking SPDs are designed for recreational riders who commute and tour. This XT trekking pedal combines SPD mechanism on one side and a stable platform pedal body and pins on the other you can ride with cleats or normal shoes. SPD has low profile platform height with large platform contact area for excellent support and stability Lightweight and high performance using a forged alloy body and chrome-moly axle 8 mm hex wrench mounting system Sealed cartridge axle system for reliability and simplified low maintenance Easy entry system with tension adjustment provides plenty of support and holds the cleat firmly in place Built in reflectors Includes SM-SH56 multi release cleat Weight: 392 grams per pair
Size specific enthusiast-level platform pedal provides optimal shoe/pedal interface. Details Optimal surface area Minimal profile 16mm thin 10 adjustable pins per side for grip Premium bearings & seal system Stamp small recommended for shoe sizes: 4-9 (UK) // 37-43 (eu) Stamp large recommended for shoe sizes: 9-14 (UK) // 43-49 (eu) Specs adjustable pins 10 per side body material A380 Aluminum endcap T15 footprint small size footprint large size 100mm x 100mm 114mm x 111m inner bearing type Igus Bearing max rider weight No restriction outer bearing type Double Cartridge Bearing shoe size US 5-10 // EU 37-43 spindle material Forged SCM 415 Chromoly Steel warranty 5 years weight small weight large 439g per pair 494g per pair
Size specific enthusiast-level platform pedal provides optimal shoe/pedal interface. Details Optimal surface area Minimal profile 16mm thin 10 adjustable pins per side for grip Premium bearings & seal system Stamp small recommended for shoe sizes: 4-9 (UK) // 37-43 (eu) Stamp large recommended for shoe sizes: 9-14 (UK) // 43-49 (eu) Specs adjustable pins 10 per side body material A380 Aluminum endcap T15 footprint small size footprint large size 100mm x 100mm 114mm x 111m inner bearing type Igus Bearing max rider weight No restriction outer bearing type Double Cartridge Bearing shoe size US 5-10 // EU 37-43 spindle material Forged SCM 415 Chromoly Steel warranty 5 years weight small weight large 439g per pair 494g per pair
The S2 is the latest development on our pedal line up. We spent a long time developing the platform shape and pin placement for the best feel underfoot and the new double bush axle system is hassle free, long lasting and easy to service.Specifications:Precision engineered custom extruded 6061 alloy body,9 own design custom pin with flanged base,Chromo Axle,Sealed bearings with DU bushings,100 x 100 pedal face,1.25mm body concave which creates 2.3mm concave at the pins,Black,381g.