The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross. The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 2 years Weight: 286g per pair Spindle: Forged scm435 chromoly steel Body: stamped steel Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Silver/Black or Silver/Red As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The crankbrothers candy is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area.Key Features:Cleat: Premium brass cleats included,Shims: Included,Release Angle: 15° to 20°,Warranty: 2 years,Weight: 272g per pair,Spindle: Forged scm435 chromoly steel,Body: one piece composite,Wings: Stamped steel,Spring: 300 series stainless steel,Inner bearing: Bushing,Outer bearing: Cartridge,Maximum rider weight: No restrictions,Colours: Black, Blue, Red or Neon Green.As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
We took our iconic V8/V12 body design and redesigned it. Lower profile larger platform and forged lightweight body make the V12 the most versatile sealed bearing at pedal around.V12 the Past Present and future of at pedal performance.100mm Long 95mm Wide [Platform] by 16mm High420g per pair
The crankbrothers candy is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 2 years Weight: 272g per pair Spindle: Forged scm435 chromoly steel Body: one piece composite Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Black Blue Red or Neon Green As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
crankbrothers Candy 1 Clipless MTB PedalsReady to tear up the toughest trails, the tough and versatile Candy 1 clipless mountain bike pedals make the most of each crank rotation. Their open design sheds mud easily and with four-sided engagement, you can simply stamp your foot down to connect. Plus, the 10-degree release angle gives the ideal amount of float for position changes and easy disengagement. crankbrothers has made them from a light but tough composite that’s combined with stainless steel wings and a Chromoly (CrMo) axle, so they can withstand plenty of abuse and come back for more.Features: Body Material: One-piece CompositeAxle Material: Forged SCM435 high strength Chromoly (CrMo)Axle Size: Standard 9/16" threadSpring Material: 300 series Stainless SteelWing Material: Stamped SteelEnd Cap: SlottedBearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearingCleats: Premium Shimano Pedalling Dynamics (SPD) type Brass cleats with shims includedCleats Included: YesQ-Factor: 52mmRelease Angle: 10°Use: Cross Country (XC), Trail, Cyclocross (CX) and GravelRibbed body for better traction when unclippedFour-sided entry and superior mud sheddingCustomisable float & release anglePremium bearings & double seal systemSnap-on traction pad technology to customise and optimise the shoe/pedal interface (available separately)Alternative cleats available for increased release angle of 15° (sold separately)Warranty: 5 yearsWeight: 294g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Candy 1 Clipless MTB PedalsReady to tear up the toughest trails, the tough and versatile Candy 1 clipless mountain bike pedals make the most of each crank rotation. Their open design sheds mud easily and with four-sided engagement, you can simply stamp your foot down to connect. Plus, the 10-degree release angle gives the ideal amount of float for position changes and easy disengagement. crankbrothers has made them from a light but tough composite that’s combined with stainless steel wings and a Chromoly (CrMo) axle, so they can withstand plenty of abuse and come back for more.Features: Body Material: One-piece CompositeAxle Material: Forged SCM435 high strength Chromoly (CrMo)Axle Size: Standard 9/16" threadSpring Material: 300 series Stainless SteelWing Material: Stamped SteelEnd Cap: SlottedBearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearingCleats: Premium Shimano Pedalling Dynamics (SPD) type Brass cleats with shims includedCleats Included: YesQ-Factor: 52mmRelease Angle: 10°Use: Cross Country (XC), Trail, Cyclocross (CX) and GravelRibbed body for better traction when unclippedFour-sided entry and superior mud sheddingCustomisable float & release anglePremium bearings & double seal systemSnap-on traction pad technology to customise and optimise the shoe/pedal interface (available separately)Alternative cleats available for increased release angle of 15° (sold separately)Warranty: 5 yearsWeight: 294g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Look Keo 2 Max Road PedalsWith a thin body for reduced drag and wider size, the Keo 2 Max road bike pedals make your feet more stable and make the most of your power delivery. Made with a tough composite body, a plate of hard-wearing stainless-steel and a chromoly (CrMo) axle, their modern design complements the styling of today’s bikes. By increasing the overall contact area with your cycling shoe, Look has ensured these pedals bring you increased comfort and efficiency.Features: Body Material: Composite body with Stainless-Steel platform Axle Material: Oversized Chromoly (CrMo) Axle Size: Standard 9/16" thread Intended Use: Road (recreational to competition use) Pedal Stack Height: 17.3mm (including cleats) Platform Width: 60mm Contact Surface Area: 500mm² Tension: 8Nm to 12Nm adjustable spring Cleats Included: Yes, supplied with grey Look Keo Grip CleatsFloat: 4.5° grey cleats included (black 0° and red 9° cleats available separately) Distance Pedal Spindle / Crank Arm (Q Factor): 53mm Pair or Single: Pair Weight: Single Pedal: 130g; Pair with Cleats: 328gTechnologies:Optimised Surface Contact: The Look Keo 2 Max pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your bestImproved Spindle Profile: The spindle profile of the Keo 2 Max pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliabilityBuy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:Compact dual sided SPD pedal designed for everyday use at good value price,Stable platform can be used with any type of SPD shoe and provides support for the foot,Mud repelling design is suitable for year round use,Cr-Mo spindle and low maintenance sealed bearing cartridge axle,Cleat tension adjustment,Weight: 352 grams per pair.
Whether you're riding for the joy of it or pushing for the top spot on the podium, you get the best of both worlds with a slim profile and incredible support from the large contact area that translates into superior comfort and maximum power transfer. Technologies: Optimised Surface Contact: The Look Keo 2 Max pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your best. Improved Spindle Profile: The spindle profile of the Keo 2 Max pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.
Look Keo 2 Max Road PedalsWith a thin body for reduced drag and wider size, the Keo 2 Max road bike pedals make your feet more stable and make the most of your power delivery. Made with a tough composite body, a plate of hard-wearing stainless-steel and a chromoly (CrMo) axle, their modern design complements the styling of today’s bikes. By increasing the overall contact area with your cycling shoe, Look has ensured these pedals bring you increased comfort and efficiency.Features: Body Material: Composite body with Stainless-Steel platform Axle Material: Oversized Chromoly (CrMo) Axle Size: Standard 9/16" thread Intended Use: Road (recreational to competition use) Pedal Stack Height: 17.3mm (including cleats) Platform Width: 60mm Contact Surface Area: 500mm² Tension: 8Nm to 12Nm adjustable spring Cleats Included: Yes, supplied with grey Look Keo Grip CleatsFloat: 4.5° grey cleats included (black 0° and red 9° cleats available separately) Distance Pedal Spindle / Crank Arm (Q Factor): 53mm Pair or Single: Pair Weight: Single Pedal: 130g; Pair with Cleats: 328gTechnologies:Optimised Surface Contact: The Look Keo 2 Max pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your bestImproved Spindle Profile: The spindle profile of the Keo 2 Max pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliabilityBuy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
FEEL THE NEW X-PERIENCE LOOK constant desire to innovate and improve your product experience has resulted in a design that is dependable, durable and easy to use. Our new mountain-bike pedal was constructed around a heavy-duty mechanism, is resistant to the negative effects of coming into contact with various external factors (rocks, roots, mud…), and provides consistent and reliable performance over time. Its spindle, equipped with a double weather-resistant seal, has been improved to withstand even the worst conditions you may encounter during your rides. We have remained devoted to the principles that guide us daily. Fewer hassles mean more time to ride, and therefore, more fun. TECHNOLOGY THE BEST POWER TO WEIGHT RATIO All the energy you produce is transferred to your MTB through your pedals. Their role, is therefore, crucial. LOOK’s objective in this new undertaking was to find solutions that would enable the most efficient transfer of rider power possible. That is why LOOK has chosen to place the weight/contact surface ratio as the primary factor when defining the product. Generally speaking, the greater the contact surface, the more efficiently energy is transferred. On the other hand, the greater the contact surface, the more the pedal will weigh. The challenge faced by our engineers was therefore, to identify the zones that are useful for energy transmission and then optimize the pedal design in order to limit any that are unused. This task allowed LOOK to engineer a pedal with the best weight / contact surface ratio on the market. LATERAL CONTACT SUPPORT Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support. MECHANISM GEOMETRY The mechanism works regardless of external conditions (in the mud, forces are significantly different from those encountered when dry), more space allows for the shedding of various foreign matter (mud, sand…). These zones give the user a constant and stable feeling of being securely clipped in, in all conditions. ADJUSTABLE TENSION An adjustable tension screw allows you to fine-tune the entry/release resistance to your personal skill level. Specifications: USE: XC Competition and Leisure TENSION: 6 to 14 BODY: Composite SPINDLE: Chromoly + FLOAT: 6° PLATFORM MATERIAL: Chromoly PLATFORM AREA: 515 mm² PLATFORM WIDTH: 60 mm STACK HEIGHT + CLEATS: 16,8 mm (10,7 + 6,1 mm) WEIGHT PEDAL: 180 g WEIGHT PAIR + CLEATS: 464 g GUARANTY: 2 years
Key Features: Technology: Flat Pedals + Look Activ Grip By Vibram,Body: Composite,Grip: Vulcanized Rubber Activ Grip,Spindle: Chromoly +,Surface Area: 107x103 mm,Q Factor: 63 mm,Weight (Pedal): 265 G,Weight Pair: 530 G .