Upgrade your Rally XC100 to a dual-sensing power meter, and analyse more than just watts to see exactly how your pedalling style generates the force that moves you.When paired with Rally XC100, the upgrade pedal completes the Rally power meter system, providing left/right balance data and cycling dynamics. The power sensor is even transferable to Rally RS and RK pedals so you can have power wherever you ride.Revolutionary cycling dynamics display where you’re generating power throughout the pedal stroke and show left/right balance. See where you apply force on the pedal to ensure proper cleat position and track seated vs. standing to see how position changes efficiency.
Rally™ power meters are tested to the extreme, so you can ride there too. Designed for road cyclists, the dual-sensing Rally RS200 features SHIMANO SPD-SL cleat compatibility and measures total power, cadence and left/right balance. Even monitor how you apply power throughout the pedal stroke. For single-sensing total power and cadence, check out Rally RS100. These durable pedals install like any other pedals and are easy to transfer between bikes. Instantly see accurate power measurements on your compatible Garmin device (sold separately) or smartphone*, and review later on the Garmin Connect™ app. View your data on Strava, TrainingPeaks® and TrainerRoad for further analysis, sharing and more.Key Features:Superior pedal design installs like any other pedal and quickly transfers between bikes; compatible with SHIMANO SPD-SL cleats,Rally™?RS200 dual-sensing power meter measures total power, cadence, left/right balance, seated versus standing, platform centre offset and power phase,Works seamlessly with the Garmin ecosystem to allow for easy software updates via your Garmin watch, Edge® cycling computers or the Garmin ConnectTM app on your compatible smartphone,For postride analysis, data sharing, mapping, route planning and more, sync your data with the Garmin Connect™ app as well as platforms such as Strava, TrainingPeaks® and TrainerRoad,When the seasons change, you can transfer the spindle between Rally™ RK/Rally XC pedal body kits (sold separately), which are also compatible with the Vector™ 3 power meter,Battery life: up to 120 hours. *When paired with a?compatible smartphone downloaded with the Garmin Connect appTrainingPeaks is a registered trademark of Peaksware, LLC.
Rally™ power meters are tested to the extreme, so you can ride there too. Designed especially for off-road riders, the dual-sensing Rally XC200 features SHIMANO SPD cleat compatibility and measures total power, cadence and left/right balance. Even monitor how you apply power throughout the pedal stroke.These durable pedals install like any other pedals and are easy to transfer between bikes. Now you can have power whether you ride gravel, cross-country mountain bike or even cyclocross.Instantly see accurate power measurements on your compatible Garmin device (sold separately) or smartphone, and review later on the Garmin Connect™ app. View your data on Strava, TrainingPeaks® and TrainerRoad for further analysis, sharing and more.Key Features:Designed for off-road use, superior pedal design installs like any other pedal and quickly transfers between bikes; compatible with SHIMANO SPD cleats (sold separately),Rally™?XC200 durable dual-sensing power meter measures total power, cadence, left/right balance, seated versus standing, platform centre offset and power phase,Works seamlessly with the Garmin ecosystem to allow for easy software updates via your Garmin watch, Edge® cycling computers or the Garmin Connect™ app on your compatible smartphone,For postride analysis, data sharing, mapping, route planning and more, sync your data with the Garmin Connect™ app* as well as platforms such as Strava and TrainingPeaks®,Train indoors by connecting with the Tacx® Training app and additional third-party platforms, including TrainerRoad and more1,When the seasons change, you can transfer the spindle between Rally™ RK/Rally RS pedal body kits (sold separately), which are also compatible with the Vector™ 3 power meter,Battery life: up to 120 hours .*When paired with your compatible smartphone TrainingPeaks is a registered trademark of Peaksware, LLC.?
The ultimate pedal for enduro racing and riding. The mallet E was developed with the help some well known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well loved features. There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals. Concave pedal platform for secure foothold. Like it’s DH equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped Chamfered edges for reduction in rock strikes Excellent mud-shedding: the design is very open. 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). Specification Weight (per pair): 419g Spindle: Forged scm 435 chromoly steel Body: 6061-T6 aluminium Wings: 17-4PH stainless Spring: 300 series stainless steel Inner bearing: Igus LL-glide bearing Outer bearing: Enduro cartridge bearing Pins: 12 pins per pedal Cleats: Premium brass cleats included Release angle: 15° or 20° Warranty: 5 years
The Boomslang Platform pedals are designed to give downhill riders the clip-in style grip they need while keeping a low 10mm-thick profile. They also feature a built-in pin carrier so pin replacement is sure to be simple and quick. Super slick patent pending spindle design. Super Lo-Profile design true 10mm thickness at centre. Custom undercut pins provide “clip in” style grip and easy removal. Pedal body carriers four hidden pins for easy replacement of broken pins. Tapered outside pedal edge for maximum grip and ground clearance. Large foot platform for modern day DH 110x108mm.
XT trekking SPDs are designed for recreational riders who commute and tour. This XT trekking pedal combines SPD mechanism on one side and a stable platform pedal body and pins on the other you can ride with cleats or normal shoes. SPD has low profile platform height with large platform contact area for excellent support and stability Lightweight and high performance using a forged alloy body and chrome-moly axle 8 mm hex wrench mounting system Sealed cartridge axle system for reliability and simplified low maintenance Easy entry system with tension adjustment provides plenty of support and holds the cleat firmly in place Built in reflectors Includes SM-SH56 multi release cleat Weight: 392 grams per pair
The crankbrothers candy is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 2 years Weight: 272g per pair Spindle: Forged scm435 chromoly steel Body: one piece composite Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Black Blue Red or Neon Green As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
High quality city style pedalsDesigned for street and commute useBlack alloy body with machined detail9/16 inch thread
Classic metal cage pedalsSteel spindle400 g per pair9/16 inch thread
V8’s run on precision ground (5/32 balls)adjustable bearings and a tough Cro. mo axle. A ‘grease port’ and ‘V-Lube’ syringe mean easy servicing. ½” axle available 'complete' in black and 9/16” axles fitted as standard in all other colours (including black) ½” axles available to order as seporate items to convert all colours to ½”. Eight replaceable M4x0.7x8 corner pins and 12 fitted non-replaceable pins per pedal.Sizes9/16'115mm Long 95mm Wide by 25mm HighWeight528g
The crankbrothers candy is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. The trade up from level 1 pedals is the 2 piece machined aluminium pedal body and increased warranty to 5 years. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 324g per pair Spindle: Forged scm435 chromoly steel Body: 2 piece machined aluminium Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Orange/Silver or Silver You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The MT-E is a modern low profile MTB pedal offering more grip for your shoes. Now available with the amazing EZY system for easy removal and fitting of pedals when needed folding parking or at home these pedals will save all the annoyances of fixed axle pedals