Super lightweight carbon SPD-SL road pedal for high performance road racing, The lightweight carbon body provides large shoe contact area to maximise the transfer of power whilst at the same time reducing weight.The wide flat profile give better road clearance and also allows wider bearing placement for increased rigidity and an even load distribution. A wider shoe cleat offers a longer life than standard as well as being easier for walking than other cleats. A large binding target allows quick engagement while the wide cleats provide more efficient pedalling.The pedal comes supplied with the blue cleats which are suitable for most riders and have a front centre pivot type 2 degree.Supplied with Shimano SM-SH12 SPD SL-CleatsStainless Steel Pedal BodyWeight: 228 gramsLow Profile 8.8mm Body HeightApprox Weight: 228g (Pair)
Every aspect of the Zero Aero pedal design has been painstakingly tailored to boost speed by minimising wind drag. Developed specifically for Time Trials and Triathlons where every second counts, the Zero Aero Pedal System provides more speed with the same power. Aerodynamic Due to its aerodynamic advantage, the Zero Aero Pedal System was chosen by Bradley Wiggins to set the UCI World Hour Record of 54.526 km on June 7, 2015, at the Lee Valley Olympic Velodrome in London. The average speed of the historic ride was 33.88 mph. Considered the holy grail of cycling achievements, the Hour Record is an honour earned by the cyclist who covers the greatest distance in kilometers in one hour. Large, stable cycling platform The Zero Aero Pedal System provides the same solid connection as conventional single-sided pedals, but with Speedplay's unique, inverted design the cleat provides the platform once the cleat is engaged. Quality without compromise Zero Aero pedals use precision cartridge and needle bearings - three of them instead of two found in most other pedals - which allows the Zero Aero to be thinner for a lower stack height, better cornering clearance, and reduced aerodynamic drag. Like all Speedplay Pedal Systems, the locking edges of Zero Aero pedals and cleats are metal-on-metal for durability and safety, unlike their competitors who use engagement edges made of plastic. Foot adjustments No other pedal system offers the precise adjustment or convenience of independently adjustable fore-aft, side-to-side, and rotational foot positions. Unlike the inexact set-up of traditional cleats, each of the three critical foot-axis adjustments of Zero Aero Walkable™ Cleats can be set or changed without affecting the position of the other two adjustments. This feature also eliminates guesswork and misalignment when replacing cleats.
Taking inspiration from DMR's V8 and V12 models, these magnesium-bodied pedals are kitted out with a strong, open design and 11 tuneable pins to give a hard-wearing and grippy performance as you take on every route. Spinning on a titanium axle, a firm engagement with the crankarm is assured while bearing the brunt of powerful pedalling. Equipped with serviceable high load DU bushings and cartridge bearings, both platforms move with ease and smoothness, keeping you in control of every descent, landing and sprint on your way across the mountain.
Designed to win, the new KEO BLADE CARBON CERAMIC improves the experience associated with the use of blade technology in a clipless pedal. This new version is the result of experience gained during years of development in the heart of our manufacturing facility and to continual improvements made thanks to daily input from the greatest of champions.Lightweight, aerodynamic, powerful, the new KEO BLADE CARBON CERAMIC has all the assets to allow you to improve and optimize your performance until victory is yours. It is for these reasons that KEO BLADE CARBON CERAMIC is the unanimous choice of many champions who have made it a weapon of choice in the conquest of their greatest achievements.The KEO BLADE CARBON CERAMIC has the best weight / power ratio in its class.Its new design completely integrates the blade for unrivaled aerodynamics. Equipped with a carbon body and blade, the Blade Carbon Ceramic is available in a CrMo version (chromoly spindle) for a weight of 110g per pedal. It is available in three tension release levels: 12,16 and 20.Every component, every ball is meticulously selected to ensure the highest level of quality and performance. The balls are precisely calibrated one by one by a machine, down to the micrometer. They are then ordered according to size in perfectly-adapted rings, with the result that every bearing has a totally unique structure.The spindle of the new CARBON BLADE CERAMIC has been completely redesigned. It is built around an oversized axle and spindle that passes through internal roller and ceramic bearings located directly under the pedal platform. This new construction saves approximately 2 watts at 100 rpm.To meet the demands of the most demanding cyclists, especially competitors, the pedal-cleat system must allow efficient power transfer thanks to a broad and rigid platform.The platform of the CARBON BLADE CERAMIC is fitted with a 67mm-wide stainless steel plate, optimizing the cleat/pedal contact areas, regardless of pedaling angle.Using a carbon body lightens the weight of the pedal and provides an additional gain in stiffness for improved power transfer.
Nukeproof Horizon CL Ti Downhill Flat MTB PedalsThe Nukeproof Horizon CL Ti DH Pedals take inspiration from the hugely popular Horizon Pro flat pedal and feature a titanium axle for the ultimate in low weight and strength. Extensively engineered to offer the optimum balance of impact strength and fatigue resistance, the Horizon CL's have an all-new SPD cleat engagement. With input and influence from Nukeproof's Pro team riders Matti Lehikoinen and Mike Jones, you can be sure your getting kit that's designed to get you on the podium.All New SPD Cleat SystemThe SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float, with a +8 degree cleat available to purchase separately.Should you happen to prefer longer cleat bolts or simply to fine-tune your riding experience, you can find the Long Nukeproof Cleat Bolts HERE This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Cold forged T1- 6061 alloy body with CNC finishing Tough and lightweight Titanium axle Proven axle system- 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Low profile contoured chassis with optimised leading edge Side Support Platform Dual Engagement Mechanism SPD compatible Weight: 462gClipless Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Extensively engineered to offer the optimum balance of impact strength and fatigue resistance, the Horizon CL's have an all-new SPD cleat engagement. With input and influence from Nukeproof's Pro team riders Matti Lehikoinen and Mike Jones, you can be sure your getting kit that's designed to get you on the podium. All New SPD Cleat System The SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float, with a +8 degree cleat available to purchase separately. Click here for a Step by Step Installation Guide
The flat pedal from crankbrothers is engineered to provide the optimal interface between shoe and pedal.The 13mm external and 11mm internal thickness on the level 7 stamp provide a low profile concave pedal body that your feet sit into. Adjustable pins allow the rider to fine tune the feel.The outsole profiles of the top mountain bike show brands were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43, and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated.Key Features:Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected. 13mm external and 11mm internal thickness.,20 adjustable pins per pedal. 8mm in the centre of the pedal and 10mm on the outer edges.,Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.,Small: 100mm x 100mm pedal body footprint,Large: 114mm x 111mm pedal body footprint,Available in red or black.Specification:Weight: 345g (Small), 375g (Large),Spindle: Forged scm 435 chromoly steel,Body: Forged 6061-T6,Inner bearing: Igus LL-glide bearing,Outer bearing: Igus LL-glide bearing,Body dimensions: 100mm x 100mm (Small), 114mm x 111m (Large),Pins: 10 adjustable pins per side,Warranty: 5 years.
These flat pedals are engineered for aggressive trail-riding as they deliver an amazing strength to weight ratio. They feature a hard-wearing aluminium platform construction, which makes them ideal at withstanding all the intensity that comes with shredding the mountain bike trails. Nukeproof has also put these through a forging and CNC-machining process, which shaves off any unnecessary weight while also allowing them to maintain their rock-solid durability. Sam Hill MTB PedalsDeveloped by mountain bike legend Sam Hill and long-time mechanic Jacy Schumilak, these MTB pedals are designed for maximum off-road performance. Using all the proven internal parts of the Horizon Pro pedals, these signature enduro pedals spin on high-quality DU bushings with two sealed cartridge bearings. In addition, the Nukeproof Horizon Ti Sam Hill Enduro Race Pedals are also equipped with titanium axles, so you'll enjoy their incredible robustness without any excess weight. Key Features: Body Material: Forged and CNC-machined 6061-T6 Aluminium,Axle Material: Titanium,Use: MTB, Enduro,Axle: 9/16",Bushings: 2x DU bushings,Bearings: 4x sealed Z989 cartridge bearings (per pair),Spare Pins Included: No,Part Number: 102270558SH03PEDFLTIBLK,Weight: 337g (approx).
Instant Engagement, Exceptional Stability Featuring instant engagement, exceptional stability thanks to the high-grip platform, which is precisely concaved in design to ensure a secure foothold. It is equipped with 8 adjustable pins on each side for additional traction and confidence while the high-end premium bearings and double seal system guarantee smooth operation, and excellent durability when landing huge jumps and riding through the roughest of conditions. Exceptional Performance and Ease-Of-Use The central cleat engagement spring has 4-sided entry to ensure you will always find the clip-in point with no hassle while shedding mud efficiently. Along the central ridge, this pedal features a traction pad on both sides, which has a customisable interface and overall, the platform has a ribbed surface for customised grip while the chamfered outer edges reduce rock strikes by providing a lower pedal profile. This pedal is designed with speed in mind will help you to achieve it by providing exceptional performance and ease-of-use.
crankbrothers Mallet DH Loic Bruni Edition MTB PedalsThe signature model of Loic Bruni, the legendary professional downhill rider who has won the Downhill World Cup twice, these Mallet DH mountain bike (MTB) pedals are loaded with performance-enhancing features. Their concaved shaped body and 8 adjustable pins give your feet the grip for confidently riding at your limit. Plus, crankbrothers’ easy to engage and release cleat system optimises your power output.Sealed BearingsThese pedals are intended for use on the steepest, fastest and craziest of downhill (DH) trails and they feature high-end premium bearings and a double seal system, which guarantee smooth operation and excellent durability when landing huge jumps and riding through the roughest of conditions.Fast Pedals for Aggressive Riding ConditionsThe 4-sided entry provided by the central cleat spring ensures a no-hassle cleat engagement while it sheds mud very efficiently. The central ridge features a traction pad on both sides with a customisable interface. The platform also has a ribbed surface for customised grip while the chamfered outer edges reduce rock strikes by providing a lower pedal profile. This pedal is designed purely with speed and aggressive riding styles in mind, due to this, it provides exceptional performance and ease-of-use on the most demanding of downhill, trail and gravity riding situations.Features: Material: Body: One-piece composite with 17-4PH Stainless-Steel wings Cleat Material: Premium Brass End Cap Material: Alloy Spindle Material: Chromoly (CrMo) Steel Spindle Size: Standard 9/16" thead Spring: 300 Series Stainless-Steel Cleat Type: Shimano Pedalling Dynamics (SPD) Cleats Included: Yes Adjustable Pins: 8 per sideInner Bearing Type: Igus LL-glide bearingOuter Bearing Type: Enduro cartridge bearingQ-factor: 57mm Release Angle: 15° / 20° Manufacturer’s Warranty: 5 years Weight: 479g (pair)Buy crankbrothers components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The ultimate pedal for enduro racing and riding.The mallet E was developed with the help some well known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well loved features. There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals. Available in black or blue colour options with the standard 52mm axle or half black / half blue with the longer 57mm axle. Concave pedal platform for secure foothold. Like it’s DH equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped Chamfered edges for reduction in rock strikes Excellent mud-shedding: the design is very open. 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). Mallet E Weight (per pair) 419g Spindle Forged scm 435 chromoly steel Body 6061-T6 aluminium Wings 17-4PH stainless Spring 300 series stainless steel inner bearing Igus LL-glide bearing outer bearing Enduro cartridge bearing Pins 12 pins per pedal Cleats premium brass cleats included release angle 15° or 20° Warranty 5 years
The flat pedal from crankbrothers is engineered to provide the optimal interface between shoe and pedal. The 13mm external and 11mm internal thickness on the level 7 stamp provide a low profile concave pedal body that your feet sit into. Adjustable pins allow the rider to fine tune the feel. The outsole profiles of the top mountain bike show brands were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43 and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated. Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected. 13mm external and 11mm internal thickness. 20 adjustable pins per pedal. 8mm in the centre of the pedal and 10mm on the outer edges. Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Small: 100mm x 100mm pedal body footprint Large: 114mm x 111mm pedal body footprint Available in red or black Specification Weight: 345g (Small) 375g (Large) Spindle: Forged scm 435 chromoly steel Body: Forged 6061-T6 Inner bearing: Igus LL-glide bearing Outer bearing: Igus LL-glide bearing Body dimensions: 100mm x 100mm (Small) 114mm x 111m (Large) Pins: 10 adjustable pins per side Warranty: 5 years