Stages Power LR for Shimano Ultegra R8000 is a dual-sided power meter for those who desire bilateral measurement.SPECIFICATIONS:Accuracy: ± 1.5%,Weight: Only less than 35gr to base crank arm,Battery Life: 200+ hours (coin cell: CR2032),Power range (Watts): 0 - 2500,Cadence range (rpm): 20 - 220,Water resistance rating: IPX7,Frame Compatibility: Most frames, see fit guide in our Support section,Device Compatibility: ANT+, Bluetooth Smart Ready,Software Compatibiity: Stages Link, Today's Plan, Training Peaks, Strava, Garmin Training Center and others.ADDITIONAL FEATURES:Tool free battery replacement,Active temperature compensation,Accelerometer based cadence measurement,Wireless firmware upgrades.
A ride ready PRECISION 3 pod is already preinstalled on a brand-new Shimano crank arm at our factory. The moment you order, our fulfillment team will get it on its way to you, and you should be able to ride with power as soon as it arrives.Once your ride-ready PRECISION 3 powermeter arrives, it just needs to be installed on your bike using the standard Shimano crank installation process. Connect a headunit or computer, and you can start riding with power!Indoor TrainingIf the weather or climate make riding outdoors tough, your 4iiii PRECISION 3 powermeter can be used with all popular indoor-training apps, such as Zwift, TrainerRoad, Wahoo SYSTM, Rouvy, and more. Simply use your favourite app's connection procedure over ANT+ or Bluetooth Smart, put your bike on a trainer, and get riding!SpecificationsAccuracy: +/- 1%,Battery Type: CR2032 Coin Cell,Battery Life: Up to 800 hours,Waterproof Rating: IPx7,Cadence Range: 30 - 170 RPM,Power Range: 0 - 4,000 W,Height: 5.5mm,Weight: 9g,Operating Temperature: 0 to 50 °C,Communication Protocols: ANT+, Bluetooth.Accuracy in 3DNot everyone has the perfect pedal stroke. With +/- 1% accuracy, 4iiii is the only crank-based power meter to use 3 strain gauges to measure all forces in your pedal stroke.Ultra Low ProfileWith an ultra low profile design, the PRECISION 3 is compatible with more bike frames than ever before.Indicator LightAt a glance, you can now see when your power meter has turned on, performed a successful Zero-offset, or has a low battery. Although, don’t expect to see that low battery indicator for a while!WaterproofBased in the foothills of the Canadian Rockies, we were tired of training tools not designed to work in our tough environment. With an IPX7 waterproof rating you can be assured that your power meter can handle the toughest conditions.Ant+ & BluetoothGet the same numbers training inside and outside. The PRECISION 3 Powermeter is both ANT+ and BLE compatible so you can use it on your preferred head unit and favorite indoor training app.
A ride ready PRECISION 3 pod is already preinstalled on a brand-new Shimano crank arm at our factory. The moment you order, our fulfillment team will get it on its way to you, and you should be able to ride with power as soon as it arrives.Once your ride-ready PRECISION 3 powermeter arrives, it just needs to be installed on your bike using the standard Shimano crank installation process. Connect a headunit or computer, and you can start riding with power!Indoor TrainingIf the weather or climate make riding outdoors tough, your 4iiii PRECISION 3 powermeter can be used with all popular indoor-training apps, such as Zwift, TrainerRoad, Wahoo SYSTM, Rouvy, and more. Simply use your favourite app's connection procedure over ANT+ or Bluetooth Smart, put your bike on a trainer, and get riding!SpecificationsAccuracy: +/- 1%,Battery Type: CR2032 Coin Cell,Battery Life: Up to 800 hours,Waterproof Rating: IPx7,Cadence Range: 30 - 170 RPM,Power Range: 0 - 4,000 W,Height: 5.5mm,Weight: 9g,Operating Temperature: 0 to 50 °C,Communication Protocols: ANT+, Bluetooth.Accuracy in 3DNot everyone has the perfect pedal stroke. With +/- 1% accuracy, 4iiii is the only crank-based power meter to use 3 strain gauges to measure all forces in your pedal stroke.Ultra Low ProfileWith an ultra low profile design, the PRECISION 3 is compatible with more bike frames than ever before.Indicator LightAt a glance, you can now see when your power meter has turned on, performed a successful Zero-offset, or has a low battery. Although, don’t expect to see that low battery indicator for a while!WaterproofBased in the foothills of the Canadian Rockies, we were tired of training tools not designed to work in our tough environment. With an IPX7 waterproof rating you can be assured that your power meter can handle the toughest conditions.Ant+ & BluetoothGet the same numbers training inside and outside. The PRECISION 3 Powermeter is both ANT+ and BLE compatible so you can use it on your preferred head unit and favorite indoor training app.
Whether you’re a pro or simply training hard, PRECISION powermeters deliver industry-leading accuracy, highly dependable cadence data, 3D powermeter technology capable of measuring tri-axial strain on your crank arm. Designed to be durable and lightweight, compatible with ANT+ and Bluetooth head units, PRECISION helps you train harder and smarter.PRECISION Ride Ready comes installed on a new Shimano left crank arm (105, Ultegra, or Dura-Ace). These crank arms will fit bottom brackets using the Hollowtech ii interface.Key Features:3D powermeter technology (patent pending) measures tri-axial strain on your crank arm,Accurate, consistent data,Lightweight, compact design,Battery status indicator via 4iiii app,Compatible with ANT+, Bluetooth Smart head units, smartphones, and other 4iiii products,User-friendly app and configurable rider compensation scale factor,Easy setup and maintenance,.Specifications:Weight: 9 grams,Data accuracy: +/- 1% error margin,Battery life: 100+ riding hours on 2032 coin cell battery.
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Shimano Ultegra R8100 crank arm and is compatible with all Shimano Hollowtech II road drivetrains.
Ridden by the pros, PRECISION PRO dual-side power meters deliver all the benefits of our left-side model (exceptional accuracy, lightweight design, ANT+ and Bluetooth compatibility, 3D powermeter technology), plus a specific breakdown of left and right wattage. Perfect for those who need specific power output from each crank side, or anyone who simply wants the best power meter on the market.The PRECISION PRO Ride Ready comes pre-installed on a new Shimano crankset.Key Features: 3D power meter technology (patent pending) measures tri-axial strain on your crank, Accurate, consistent data, Lightweight, compact design, Battery status indicator via 4iiii app, Compatible with ANT+, Bluetooth Smart head units, smartphones, and other 4iiii products, User-friendly app and configurable rider compensation scale factor, Easy setup and maintenance, Over-the-air upgrade capability for adding new features and updates,.Specifications: Weight: 25 grams (power meter only), Data accuracy: +/- 1% error margin, Battery life: 100+ hours on 2032 coin cell battery, Battery status indicator: Alert at 15% battery power.
Rally™ power meters are tested to the extreme, so you can ride there too. Designed for road cyclists, the dual-sensing Rally RS200 features SHIMANO SPD-SL cleat compatibility and measures total power, cadence and left/right balance. Even monitor how you apply power throughout the pedal stroke. For single-sensing total power and cadence, check out Rally RS100. These durable pedals install like any other pedals and are easy to transfer between bikes. Instantly see accurate power measurements on your compatible Garmin device (sold separately) or smartphone*, and review later on the Garmin Connect™ app. View your data on Strava, TrainingPeaks® and TrainerRoad for further analysis, sharing and more.Key Features:Superior pedal design installs like any other pedal and quickly transfers between bikes; compatible with SHIMANO SPD-SL cleats,Rally™?RS200 dual-sensing power meter measures total power, cadence, left/right balance, seated versus standing, platform centre offset and power phase,Works seamlessly with the Garmin ecosystem to allow for easy software updates via your Garmin watch, Edge® cycling computers or the Garmin ConnectTM app on your compatible smartphone,For postride analysis, data sharing, mapping, route planning and more, sync your data with the Garmin Connect™ app as well as platforms such as Strava, TrainingPeaks® and TrainerRoad,When the seasons change, you can transfer the spindle between Rally™ RK/Rally XC pedal body kits (sold separately), which are also compatible with the Vector™ 3 power meter,Battery life: up to 120 hours. *When paired with a?compatible smartphone downloaded with the Garmin Connect appTrainingPeaks is a registered trademark of Peaksware, LLC.
Rally™ power meters are tested to the extreme, so you can ride there too. Designed especially for off-road riders, the dual-sensing Rally XC200 features SHIMANO SPD cleat compatibility and measures total power, cadence and left/right balance. Even monitor how you apply power throughout the pedal stroke.These durable pedals install like any other pedals and are easy to transfer between bikes. Now you can have power whether you ride gravel, cross-country mountain bike or even cyclocross.Instantly see accurate power measurements on your compatible Garmin device (sold separately) or smartphone, and review later on the Garmin Connect™ app. View your data on Strava, TrainingPeaks® and TrainerRoad for further analysis, sharing and more.Key Features:Designed for off-road use, superior pedal design installs like any other pedal and quickly transfers between bikes; compatible with SHIMANO SPD cleats (sold separately),Rally™?XC200 durable dual-sensing power meter measures total power, cadence, left/right balance, seated versus standing, platform centre offset and power phase,Works seamlessly with the Garmin ecosystem to allow for easy software updates via your Garmin watch, Edge® cycling computers or the Garmin Connect™ app on your compatible smartphone,For postride analysis, data sharing, mapping, route planning and more, sync your data with the Garmin Connect™ app* as well as platforms such as Strava and TrainingPeaks®,Train indoors by connecting with the Tacx® Training app and additional third-party platforms, including TrainerRoad and more1,When the seasons change, you can transfer the spindle between Rally™ RK/Rally RS pedal body kits (sold separately), which are also compatible with the Vector™ 3 power meter,Battery life: up to 120 hours .*When paired with your compatible smartphone TrainingPeaks is a registered trademark of Peaksware, LLC.?
Tracking your power output and training data has never been easier or more accessible. Giant’s all-new Power Pro system delivers accurate power metrics through an integrated system that’s precise, reliable and simple to set up. The pros know that the most effective training is smart training, so get in the know and start training with power. Key Features: +/- 2 % accuracy at 150w/80rpm (each side), Giant-exclusive algorithm ensures accurate and stable data output with no environmental distractions, Accelerometer allows magnet-free measurement, LED indicator displays battery level and alerts recharge when power gets below 20%, Integrated magnetic rechargeable design protects device from water and dust ingress ,IPX7 waterproof, Bluetooth® Smart/ANT+ compatible for broad compatibility, easy calibration and firmware updates., High-capacity lithium battery delivers up to 100 hours of riding on a single charge ,2 year warranty world-wide, Various crank lenghts available on either 50/34 or 52/36,. Specification Accuracy:± 2%, Weight: Left side 16g; Right side 16g, Power range:0 – 3000 watts, Cadence range: 20-180 rpm, Water Rating:IPX7, Battery: Rechargeable lithium-ion, Battery Life:100 hours, Connections: Bluetooth® Smart/ANT+,. This fully integrated, dual-sided power meter measures power output and delivers accurate data to help you track, analyze and improve your performance on the bike. Engineered with multi-axis left and right crank arm sensors, the Power Pro displays vital information including power (watts), pedal balance, force angle and cadence. The meter pairs with the Giant NeosTrack GPS computer and is also compatible with other popular ANT+ head units. Its battery lasts up to 100 hours (or 1500 miles) of riding on a single charge and is easy to re-charge. An LED indicator on the crankarm-mounted Power Pro displays the battery level, or you can view it using the Giant RideLink app. The app also lets you update firmware and calibrate the Power Pro before each ride.
Experience a better bike ride. SRAM Rival eTap AXS features the technology modern riders demand—intuitive wireless shifting, innovative gearing, integrated power measurement, AXS connectivity, and refined hydraulic disc brakes. It’s low on complexity, but rich with features.Power every ride. We’ve taken the reliability, elegance and features of Quarq’s legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It’s invisible technology that adds minimal weight and will help you get to the finish line faster, and can be used to upgrade any eTap AXS bike to power.• An elegant integrated design• DUB-PWR spindle-based unit measures left side power to calculate total watts• Proven Quarq reliability and accuracy• Long battery life (400+ hours) to power a season of rides• User replaceable lithium AAA battery• DUB bottom bracket adds durability and simplicity• Waterproof (IPX7 waterproof to 1 meter for 30 minutes)• Lightweight (less than 40g heavier than standard crankset)• Simple and affordable power meter upgrade option (Right Arm/BB/Spider/Chainrings non included)
Experience a better bike ride. SRAM Rival eTap AXS features the technology modern riders demand—intuitive wireless shifting, innovative gearing, integrated power measurement, AXS connectivity, and refined hydraulic disc brakes. It’s low on complexity, but rich with features.Power every ride. We’ve taken the reliability, elegance and features of Quarq’s legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It’s invisible technology that adds minimal weight and will help you get to the finish line faster, and can be used to upgrade any eTap AXS bike to power.• Made for wide chainline cranksets for bikes with the widest gravel tires• An elegant integrated design• DUB-PWR spindle-based unit measures left side power to calculate total watts• Proven Quarq reliability and accuracy• Long battery life (400+ hours) to power a season of rides• User replaceable lithium AAA battery• DUB bottom bracket adds durability and simplicity• Waterproof (IPX7 waterproof to 1 meter for 30 minutes)• Lightweight (less than 40g heavier than standard crankset)• Simple and affordable power meter upgrade option(Right Arm/BB/Spider/Chainrings non included)
Experience a better bike ride. SRAM Rival eTap AXS features the technology modern riders demand—intuitive wireless shifting, innovative gearing, integrated power measurement, AXS connectivity, and refined hydraulic disc brakes. It’s low on complexity, but rich with features.Power every ride. We’ve taken the reliability, elegance and features of Quarq’s legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever.• Direct mount chainrings in 38T through 46T• Wide chainline crankset for bikes with the widest gravel tires• An elegant integrated design• DUB-PWR spindle-based unit measures left side power to calculate total watts• Proven Quarq reliability and accuracy• Long battery life (400+ hours) to power a season of rides• User replaceable lithium AAA battery• DUB bottom bracket adds durability and simplicity• Waterproof (IPX7 waterproof to 1 meter for 30 minutes)• Lightweight (less than 40g heavier than standard crankset) (BB not included)