A sharp-looking seat for taking on any adventure, this NACK-railed iteration has comfort and performance at its heart. Built for any route, with a leaning towards venturesome MTB riders, it comes with light foam padding to make sure your sit bones and other areas are well-cushioned when taking on more rugged routes. The central PAS channel cut-out takes pressure away from your more sensitive areas, while the shape of the rear gives fantastic pelvic and coccyx support, enhancing the enjoyment and longevity of your rides. Finished with a smooth and breathable Microfibre cover, this is the ideal throne for the multi-terrain rider.
Ready for racing, this saddle features a high-quality microfibre and polyurethane (PU) cover for the best combination of durability and support. Repente has also equipped this model with a special high-grip film, which allows you to maintain an ideal riding position as you transfer all of your leg power to your pedals. Both the rail and the shell are made of high-modulus unidirectional carbon fibre, so you can enjoy a stable and secure hold to your seatpost, without any unnecessary excess weight. Weighing only 135g and coming kitted out with lightweight EVA foam padding, this is a perfect upgrade for modern time trial (TT), triathlon (Tri) and track racing. The Magnet saddle is made specifically for the aero riding position, where the athlete uses much more the front of the saddle. The nose of the Magnet has a more important function because it has to sustain the rider comfort. The Magnet’s nose is larger, with a thick padding and a relevant anatomical channel. Because the normal sitting position is more forward, the wider nose width does not give any discomfort. Ultralight Saddle for Triathlon and Time Trial The Repente Magnet is the ultimate Triathlon/TT saddle for men and women. Finding and maintaining your perfect saddle position has never been so easy. Width: All Repente saddles take into account the conventional anatomical centre to position and shape: 1) The best point of contact of the ischium bones (sit bones) for comfort and ideal the position for performance. 2) The outline shape of the front of the saddle to give freedom of movement to the legs. The Magnet’s surface coating is in three parts, each made of a specific material that helps maintain the best position on the saddle. Repente calls this Position Control, hence the name of the saddle, allowing you to move when you want and maintain power output. Please note: Make sure your seatpost clamp is suitable for 7x9mm rails. The Repente Magnet Grip Saddle's carbon rails measure 7x9mm, so the seatpost clamp must accommodate this configuration. Please make sure that your bike has a seatpost clamp suitable for this measurement: the traditional 7mm clamp for round rails will not work. Manufacturer's Part Number: RP-ASMG00-1207BK Black 240x140mm
Specifically designed for the demands of road cycling, this saddle comes equipped with a high-quality microfibre cover that's hard-wearing and reliable on longer-distance journeys. Repente has also kitted out this model with a shell that uses Long Carbon Fibre (LCF) technology to deliver increased comfort and support while keeping the weight impressively low. Another highlight is its Aisi stainless steel rails, which gives it extra strength and durability as it holds you firmly to your seatpost. One final benefit is its polyurethane padding and central opening that is designed to reduce numbness and fatigue around your sit bones. This makes the Quasar an ideal choice for going the extra mile. Quasar stands out both for the gritty appeal of its design and for its excellent cost/effectiveness. Painstaking care has been applied to every single detail both in the design phase and in the product manufacturing process, all exquisitely Italian-made in the best Repente tradition. Design, comfort and functionality come together in Quasar to meet the needs of both racers and amateur cyclists. Road Bike Saddle with Aisi Stainless Steel Rails Top-class materials and technologies for a saddle that weighs less than 170 grams, designed and developed by Repente on the basis of feedback from professional athletes and the many enthusiasts who use Repente saddles on and off the road. The first saddle by the Italian brand to have a steel rail rather than a carbon fibre. The rail is made of Aisi stainless steel, a type of steel with highly advanced mechanical properties. Repente has further strengthened it by submitting it to a special process called Shot 304, which hardens the metal surface and makes it more resistant. Flat Design and Central Relief Channel The saddle shape is characterised by a 142mm "flat" design seat and central opening, integrated into a wide channel designed to relieve perineal pressure. The comfortably sized rear support surface has been modelled according to anatomical and ergonomic requirements - a typical feature of all Repente saddles. The "close fit" effect produced by this particular shape makes the seat comfortable without having to use thick layers of padding and allows users to immediately find their most effective riding position. Manufacturer's Part Number: RP-ASQS00-1700BK Black 260x142mm
Equipped with a supportively-shaped rear which looks after your lumbar area and coccyx while keeping your pelvis rotating as naturally as can be, this versatile saddle keeps you in prime position as you shoot for the podium. Padded with light foam to cater for your sit bones, this Dimension model eliminates numbness and perineal pressure with its large PAS system central cut out. The Microfibre cover allows for smooth movement as you take up the best position for the section ahead, with Tirox rails providing a firm and reliable hold, letting your ride with speed, power and confidence. Technologies: TiroX Rail: Rail light-alloy steel, this material is highly resistant to traction, and torsion for its light weight it’s for these reasons it is used in used in the aviation and aerospace industry. TiroX then turns out to be a rail with a good balance between weight and strength, that doesn’t fear the normal stress that addresses a bicycle.
This Mathieu Van der Poel (MVDP) signature saddle features a high-quality fibra-tek cover, which allows it to handle all of the pressure and intensity associated with road racing and endurance riding. Selle Italia has also equipped it with carbon rails for a superior combination of stiffness, durability and low weight performance as you conquer every mile of road. Another highlight is it comes race-ready with a Superflow channel that runs down its middle section for relieving pressure from around your sit-bones and reducing numbness and fatigue. Weighing in at only 162g, this is a lightweight choice of upgrade for staying comfortable and supported without adding any unnecessary weight to your ride. A Never Ending Tradition Thanks to the collaboration with an undisputed champion, like Mathieu Van der Poel, the tradition is continuing in the best way; and it is from this partnership that the Flite Boost Kit Carbonio Superflow “MVDP edition” is born. Dedicated Logo Made in white, like the Flite Boost usually used by Mathieu during the race, it features a logo with the word MVDP created “ad hoc” for the athlete. Manufacturer's Part Number: 017A920ICA007 White L3
Relieving the pressure in the perinereal area to keep you primed in the triathlon seating position the Zero Tri PAS Saddle with 2.0 rails is outrageously comfortable and ready to deliver performances of the highest level. Padded with light foam pressure to the pelvic area is also reduced thanks to the PAS system. Utilising 2.0 rails, there is a chromo-molibdeno rail that has a very high tensile strength and a 7mm rail clamp.
Designed to eliminate pressure from sensitive areas, in addition to its dropped and cut-out central area, it also has a sloping “eagle’s beak” type nose. It’s also at home on the road or off-road and is constructed around a stiff and lightweight nylon/carbon fibre composite shell. This shell has undergone extensive testing to meet the most stringent resistance and stability tests. In addition to this, the Vulkor also boasts durable stainless steel rails.
The Nymber Ladyline Saddle from Seele SMP adopts the base from its racing-specific Vulkor model and comes fully equipped with a comfortable and vibration dampening elastomer foaming padding inside. Not only does this advanced padding offer luxurious comfort but it also provides consistent support on longer rides and harsher terrain conditions, so you can really push your performance to the next level.
As with the Vulkor model, this saddle boats a full-length central channel and a long cut out. The perfect choice for versatile and demanding cyclists, it has a sloping “eagle’s beak” type nose, this combines with the dropped and cut-out central area to eliminate pressure from sensitive areas. Advanced Shell and Rails The shell of the Nymber is a lightweight nylon/carbon fibre composite, which has undergone extensive testing to meet the most stringent resistance and stability tests. In addition to this, it also features durable stainless steel rails.
The Bel Air is perfect for a wide range of riding disciplines from Enduro to Trail riding. Boasting a highly durable microfiber cover alongside lightweight PU-foam padding for top-notch support and comfort. Thanks to its raised rear section, you'll benefit from excellent pedal stroke performance while its special nose platform provides a greater surface area, helping you master those difficult climbs.
The KRT3 Saddle from Selle SMP boasts a stiff nylon base shape with stainless steel rails which provide the ultimate platform for efficient power transfer. This show-stopper is ideally suited to riders with a narrow sit bone width thanks to its durable cover with high-quality foam elastomer padding providing luxurious comfort. This sleek saddle looks as amazing as it performs and is perfect for a soothingly comfy experience every ride.
Technologies: CPC: The innovative features of the CPC technology (patented by Prologo), positioned in strategic areas of the saddle, provides maximum shock absorbing, anti-vibration and allows the rider to keep the best position on the saddle (in all weather conditions). CPC is manufactured with a special 3D nano polymer. Developed and tested by professional road and mtb teams, it ensures comfort and increases performance. Active Density: The Active Density feature, combines different foam densities and variable base stiffness. These are located in strategic areas of the saddle. Ergo Shape Design: The ESD technology ensures a proper support for the ischial bones joined to a linear pedalling without friction, thanks to its particular designs in the front and rear part of the saddle. Tirox Rails: This material is highly resistant to traction and torsion for its light weight, and it’s for these reasons it is used in the aviation and aerospace industry. TiroX is a rail with a good balance between weight and strength, that doesn’t fear the normal stress associated with off-road cycling.