Key Features:MaterialAlloy,Steerer Diameter28.6mm,Reachn/a,Rise35?,Clamp Size31.8mm,ColourBlack,Wheel SizeNone,DisciplineMTB.Please Note: Image for illustration purposes only
The 3D forged 7050 T6 aluminium alloy stem is designed with a variable thickness oval section and reinforced with unidirectional carbon fibre, making it extremely light and durable.* Sizes: 90-100-110-120-130mm* Clamp diameter: 31,8mm (bar)* Clamp diameter: 28,6mm (1-1/8)* Stem angle: 84deg/96deg* Material: Forged in Aluminium alloy 7050 T6 and HM Carbon fibre* Finishing: Clear coated Carbon* Bolts: Front M5 - Rear M5* Weight: 120g (100mm)
What It Is An aerodynamically honed stem with adjustable length and angle to optimize your position. Linking handlebar to fork, the stem was developed with Team Dimension Data for the refined ride response and control needed in a critical area of the bike. This stem is intended for negative drop only and cannot be flipped or reversed in a positive rise.Why We Made ItThe rider makes up 80-90% of total aero drag, so refining your position can produce some of the biggest gains of all. Further, the shape of the stem, plus the ability to eliminate headset spacers, allows for cleaner airflow at the front of the bike, producing valuable drag savings. Created in conjunction with Team Dimension Data, the stem delivers the confident and responsive ride feel desired by the best riders in the world. Who’s It ForRacers, triathletes, and performance-focused riders looking to optimize their position and improve overall aerodynamics, while maintaining the stiffness and comfort needed for speed.Full DetailsOur approach to aerodynamics has always been to find the best solution for the complete system of the bike and rider because we understand that there is more to aerodynamic performance than a low drag figure in the wind tunnel. This approach can be seen in our wheels, where we target stability alongside drag reduction to make you as fast as possible on the road in real conditions, where it counts. It can also be seen in our pioneering SES Aero Road Handlebar, which delivers a speed boost through rider positioning as well as its shape. The SES Aero Road Stem is the natural partner to that handlebar, using the same parallel design considerations. First, we developed a shape with reduced frontal area, smoother airflow, and lower drag. Next, we designed in beautifully simple methods for adjusting the angle and fine-tuning the length. The result is a lightweight stem that fits any of our handlebars and makes you faster.
The Horizon DM Stem is based on the Nukeproof Sam Hill direct mount stem, which was developed in conjunction with the 5-time Downhill World Champion.It shares the same stiffness and strength, but in a slightly longer 45mm length.It also features extensive CNC machining to the 6061 aluminium, ensuring outstanding stiffness and a very low weight.A perfect match to the Nukeproof Horizon bars, the Horizon DM Stem is finished off with huge M6 bolts throughout for extra security, making this the perfect option for the most aggressive downhill riders. Key Features: Material: 6061 Aluminium,Extensively CNC-machined to reduce weight,Oversized M6 bolts throughout,Bar Clamp Diameter: 31.8mm,Rise: 30 degrees,Use: Downhill,Weight: 145g.
The Nukeproof Sam Hill Horizon Stem is the newest addition to the Nukeproof cockpit component range. Developed alongside Nukeproof pro athlete, Sam Hill, the Horizon stem has been tested in the most demanding Enduro and Downhill conditions; Nukeproof has optimised this stem to be lightweight and ultra-strong.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the titanium steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The faceplate has also been designed specifically with "no gap" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and is also included within the stem packaging.Features:Precision CNC-machined,Lazer etched Sam Hill logo,Titanium bolts,Opposing offset steerer clamp to give maximum thread contact,Knee-friendly steerer clamp design,Four-bolt front mount face plate,Bar Clamp: 31.8mm, 35mm,Steerer Diameter: 1 1/8",Length: 35mm, 50mm, 60mm,Rise: +/- 5mm,Stack Height: 35mm.
The Brand-X stem is 3d Forged from Aluminium to produce a stem which is strong and stiff yet still lightweight. It is designed to use a bar with a clamping zone of 31.8mm and is available in lengths from a 90mm to 120mm. Our 7 Degree rise design will give you the option of a high (For Comfort) or low (Aerodynamic) handlebar position. Key Features: Sizes: 90, 100, 110, and 120mm Lengths,Rise: 7 Degrees,Clamp Diameter: 31.8,Material:3D Forged Aluminium,Finish: Anodised,Colour: Black,EN-M Approved,Weight: 162 grams (110mm).
The Brand-X stem is 3d Forged from Aluminium to produce a stem which is strong and stiff yet still lightweight. It is designed to use a bar with a clamping zone of 31.8mm and is available in lengths from a 60mm to 80mm.Our Flip/Flop design allows the user to easily run it upside down to help keep the front end low; Ideal for a 29” or 27.5” bike where the front tends to be higher than you would want. Key Features: Sizes: 60, 70 + 80mm,Rise: 7 Degrees,Clamp Diameter: 31.8,Material: 3D Forged Aluminium,Finish: Anodised,Colour: Black,EN-M Approved,Weight: 146 grams (60mm).
The Brand-X Enduro stem is 3d forged from aluminium to produce a stem, which is very strong and stiff yet still very lightweight. It is designed to use with a bar with a clamping zone of 31.8mm and is available in lengths of 40, 50 and 60mm. The Flip/Flop design allows the user to easily run it upside down to help keep the front end low; ideal for a 29” or 27.5” bike, where the front tends to be higher than you may want. Key Features: Sizes: 40mm, 50mm, 60mm,Rise: 3 degrees,Clamp Diameter: 31.8mm,Material:3D Forged Aluminium,Finish: Anodised,Colour: Black,EN-M Approved,Weight: 114g (40mm), 131g (50mm) and 134g (60mm).
The Nukeproof Neutron AM Stem is cold-forged from high-grade 6061 aluminium for optimum strength. It features extensive CNC machining to shave off excess material and is specifically built to tackle the gnarliest of DH trails while staying light enough for all-round trail riding.Ultimate Strength and StiffnessNukeproof has redesigned the four-bolt faceplate system to shave some weight whilst retaining strength, which offers maximum security against bar slippage. The ultra-wide clamping area provides exceptional stiffness and security, and the low stack height provides more cockpit tuning possibilities.Key Features:Material: 6061 Alloy,Stack Height: 40mm,Weight: 185g.
Light Weight And Rock SolidSpecifications:Material (SP/ST): Unidirectional Carbon,Length (ST): 100mm, 110mm, 120mm, 70mm, 80mm, 90mm,Stem angle/rise: 6 degrees,Clamp diam: 31.8mm/26.0mm,Steerer clamp diameter: 1-1/8 in,Colour/finish (ST): Natural carbon,Hardware: Titanium.
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars — not that you’re worried about that kind of thing. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction.
Key Features:The wolf tooth ultralight stem cap and bolt are sleek, subtle and sit flush against your stem. If you value every single detail of your ride then elevate to a celestial realm with this beautiful stem cap.,Machined by wolf tooth in their Minneapolis HQ using premium-grade 7075-t6 aluminium, this is a great addition to any top-end build..