Vitus Auro Disc StemWhether you're replacing a damaged or worn-out part, or you need to fine-tune the fit with a different length, this is a direct replacement stem compatible with Vitus Auro Disc TT frames only.Designed as a part of a complete aero system, the Vitus Auro Disc Stem integrates perfectly with the Auro Disc TT frame and sits flush with the top tube to reduce the frontal area and maximise efficiency. It features a high-quality unidirectional (UD) carbon build, which makes it tough and dependable without adding any unnecessary excess grams to your road bike. Vitus has also equipped it with a clear coating finish for a sleek appearance on your ride.Features: Material: UD Carbon Finish: Clear Coating Compatibility: Vitus Auro Disc TT Bike Only (2021 - Present)Buy Vitus Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Box One stems are cold forged from the highest quality 6061-T6 aluminum available. Featuring an open skeletal design and a dual mid-bolt wedge mounting system, they are lightweight yet maintain a very high level of strength and stiffness. By removing the rear pinch bolts and moving the mounting bolts to the middle of the stem, Box managed to reduce the weight and size and eliminated a serious hazard to the rider’s knees. To ensure proper clamping force, the stem must be mounted on a fork with at least 40mm of the exposed steerer tube. Please note, this stem is not compatible with carbon fiber steerer tubes. ###section### Product Specs TYPE: Front Load REACH: 55mm/60mm RISE: 0 CLAMPING DIAMETER: 31.8mm WEIGHT: 244 grams / 8.6 ounces (53mm)
Deda Elementi SuperBox DCR StemThis versatile stem is suitable for both road cycling and gravel riding. It features a robust 6061 alloy build for a fantastic balance of strength and durability while also keeping weight to a minimum. Deda has also equipped this model with comfortable geometry including an 82 degree angle for smooth and precise steering, wherever your next ride takes you.The evolution of the famous Superzero stem that's designed to allow fully integrated cable routing when coupled with Deda handlebars featuring the DCR system (Deda's internal cable routing). The Superbox stem features a proprietary system that provides two possible mounting solutions for the internal cable routing:- Completely internal cable routing through bar/stem (DCR).- Semi-internal cable routing through stem (S-DCR).DCR compatible handlebars: Superzero DCR for Road use, Gera DCR for Gravel and Alanera DCR for integrated bar and stem.The stem package includes special spacers that provide the channels for the housing cables. The spacers and the nylon cover are designed with slits that let them pull open, so they can be added or removed to get the fit right without having to remove all cables. The innovative 3D forging technology and the flat design result in a better aero performance. The Superbox stem is offered in different lengths from 90 to 130mm to enable riders to find their ideal riding position.It comes complete with a nylon cover, integrated top cap, headset spacers and the 46 & 56mm top cover included.Features: Material: 6061 Alloy Use: Road, Gravel Angle: 82 degrees Handlebar Clamp Diameter: 31.7mm Fork Steerer Diameter: 1 1/8" Clamp Height: 31mm (40mm including cover) Cable Routing: Internal cable routing (DCR) and semi-internal cable routing (S-DCR) Includes: Integrated Top Cap / Headset Spacers and Top cover for headtube 56mm & 46mm Weight: 175g (110mm option)Manufacturer's Part Numbers: DSZ190P Black 90mm DSZ200P Black 100mm DSZ210P Black 110mm DSZ220P Black 120mm DSZ230P Black 130mmBuy Deda Elementi Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope AM-FR 35mm StemThe Hope AM-FR 35mm stem is a fully CNC machined stem developed to work with 35mm diameter handlebars. Coming in a multitude of anodized colours, the AM-FR stem is a perfect way to customise and lighten your mountain bike.Features: Material: CNC machined from a solid billet of 2014 T6 Aluminium Rise: 0° Stack Height: 40mm Invertible: No Top Cap Included: No Redesigned with more material taken out to save weight Opposing steerer clamp bolts remain to give exceptionally rigid steering characteristics Optimum machining to give the lightest possible weight without compromising stiffness Suits bars with 35mm clamp diameter only Weight: 134g (35mm)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope AM-FR 35mm StemThe Hope AM-FR 35mm stem is a fully CNC machined stem developed to work with 35mm diameter handlebars. Coming in a multitude of anodized colours, the AM-FR stem is a perfect way to customise and lighten your mountain bike.Features: Material: CNC machined from a solid billet of 2014 T6 Aluminium Rise: 0° Stack Height: 40mm Invertible: No Top Cap Included: No Redesigned with more material taken out to save weight Opposing steerer clamp bolts remain to give exceptionally rigid steering characteristics Optimum machining to give the lightest possible weight without compromising stiffness Suits bars with 35mm clamp diameter only Weight: 134g (35mm)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The HSF / Aeria Ultimate FC hydration system is designed to seamlessly integrate with the Aeria Ultimate Stem - and combined with the Aeria Ultimate aerobar this system provides a fully integrated front end super bike solution for any time trial bike A rubberised shroud ensures that the aerodynamic line between bottle and frame is complete This BTA system features the race proven no splash refill port, a straw magnet mount for streamlined airflow over the top of the system, a bite valve for fluid control and a removable computer mount Capacity is a hydrating 857ml and system weight is 420g Material Type: Plastic Product Type: Triathlon Systems
The Burgtec Direct Mount MK3 Stem has been pointing some of the world s very best riders downhill for a long time now. Used by the likes of the Santa Cruz Syndicate Team, the Burgtec Direct Mount MK3 Stem has chalked up an impressive number of world cup podium finishes over the last five years, and has been on top of the world championship two years on the bounce. Designed to handle the demands of World Cup spec race bikes, you can rest assured that the Direct Mount MK3 Stem will handle anything you could possible throw at in, a worthy addition to any bike. Fully CNC machined construction and super stiff 35mm or 31.8mm clamp diameterComes with steel bolt hardware as standardDesigned to cope with the demands of World Cup race spec bikesWeight from 130gFits Rockshox Boxxers, Fox 40, DVO, Manitou, Marzocchi and any other forks that use IS stem mounts
Features: 3D Forged and CNC machine AL2014 CSI Faceplate Chromoly hardware ±6° x L70, 80, 90, 100, 110, 120, 130mm Ø31.8mm handlebar clamp diameter 40mm fork clamp stack height Shim to adapt 1.1/4 stem to 1.1/8 steer tube Included Anodized black Glossy carbon UD CSI faceplate Colour graphics 141g (100mm)
Due to the Trentacinque’s 35mm bar clamp, when it is used along with 35mm bars, you’ll enjoy more precise handling as you dive into the bends and better power transfer when sprinting or attacking a climb. Also, as it’s 3D forged from high-quality 2014 aluminium it’s extremely durable and weighs a mere 136 grams in the 110mm version.
Vision TriMax Alloy Road StemDeveloped to offer a superior strength to weight ratio, this road bike bike features a 3D forged and CNC-machined alloy construction. Thanks to its CNC-machining process, any excess material has been shaved off to save weight while still maintaining maximum durability. Vision has also kitted out this model with a tough alloy faceplate and chromoly (CrMo) steel hardware to securely fasten it to your ride. Slightly sloping with a -6° angle, this is a perfect choice of upgrade for a reliable hold as you clock up the miles.Features: Stem Material: 3D Forged and CNC-machined from AL2014 Alloy Faceplate Material: Alloy Hardware Material: Chromoly (CrMo) Steel Use: Road Clamp Diameter: 31.8mm Stem Angle: 6 degrees 4-bolt sculpted AL2014 Alloy Weight: 129gManufacturer's Part Number: 670-0349016050 Black 80mm 670-0349017050 Black 90mm 670-0349019050 Black 110mm 670-0349020050 Black 120mm 670-0349018050 Black 100mm 670-0349021050 Black 130mmBuy Vision Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Specifically developed for road cycling, this stem comes equipped with a 3D forged and CNC-machined alloy construction for a superior strength to weight ratio. Thanks to its CNC-machining process, any excess material has been shaved off to save weight while still maintaining maximum durability. Vision has also kitted out this model with a tough alloy faceplate and chromoly (CrMo) steel hardware to securely fasten it to your ride. Slightly sloping with a -6° angle, this is a perfect choice of upgrade for a reliable hold as you clock up the miles. Manufacturer's Part Numbers: 670-0349016050 Black 80mm 670-0349017050 Black 90mm 670-0349019050 Black 110mm 670-0349020050 Black 120mm 670-0349018050 Black 100mm 670-0349021050 Black 130mm
Hope AM/FR StemCNC machined from a single piece of 2014 T6 aluminium, the AM/FR stem brings you increased levels of strength, rigidity and handling. One of the strongest and more durable mountain bike stems on the market, it's strength and clamping force is further enhanced by the four opposing handlebar clamping bolts. To further reduce the weight, Hope adapted its design to remove extra material but without compromising on toughness or durability.Reasons to Buy: Increased strength, rigidity and handling. One of the strongest and more durable mountain bike stems on the market. Reduced weight without compromising durability.Features: Material: CNC Machined from 2014 T6 Aluminium Head size: 1-1/8" Diameter: 31.8mm Invertible: No Stem Cap Included: No Opposing steerer clamp bolts and four-bolt handlebar clamp give exceptionally rigid steering Anodised and laser etched 3D milled detailing Compatible with Hope Light systems Weight: 133g (0°)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.