Key Features:6061-T6 aluminum.,Four bolt bar clamp holds bar securely in position.,Interlocking U-Shaped Handlebar Clamp Geometry.,Faceplate eliminates stress risers which cause your bar to bend or break.,Opposing bolts on steer tube clamp gives extreme clamping power while reducing stress on the steer tube.,Available in 1 inch 1/8th with a 31.8mm bar clamp only,Laser etched logos..Specification:Built for: AM/XC/DH,Sizes: 50mm, 65mm,Rise: 0 degrees,Bar diameter: 31.8mm,Stack Height: 40mm,Weight: 150 grams (50mm), 170 grams (65mm).
The Turbine stem is highly engineered to maximize stiffness and minimize weight and guarantee you're cockpit won't get overlooked. Featuring aerospace 7075 aluminum alloy, this stem is ideal for high level cross country racers but is strong enough for the all mountain rider.Key Features:Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight.,Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body..Specification:Built For: XC/Trail/AM,Size: 60, 70, 90, 100, 110mm,Rise: 0+ or - 6 degrees (reversible),Bar Diameter: 31.8mm,Stack Height: 39.5mm,Weight: 135g (90mm with 31.8mm bar clamp).
Ritchey WCS C220 StemA sturdy and dependable stem by Ritchey, this C220 model rightfully takes its place in the World Championship Series roster thanks to its forged aluminium and CrMo construction and superb holding performance. Giving a 220-degree cover over your bar, the stem holds to your bar, aligning the bolt forces for a full and damage-preventing grip. Simple to fit by its Flip-Flop mount, the C220 is a reliable and robust addition to your cockpit. Features: Material: Aluminium, CrMo Steel Stack Height: 42mm Bar Clamp Type: 4-bolt, detachable 42mm faceplate Angle in Degree: 84/6 Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Reinforcing your ride with comfort and safety, the POC Spine VPD System Vest is extremely flexible and sports a moulded back protector to ensure you are fully protected when shredding aggressively. The spinal area is supported by a KEVLAR barrier for anti-penetration protection and the back has flexible hexagon geometry, making this vest one of the safest on the market. A true offroad warrior, the Spine VPD vest is also highly breathable and sports ventilation channels that optimise moisture control should you work up a sweat. To keep you secure there is an internal waist strap while those who need to store loose change can make good use of the chest pocket.
Based on our Box One Trail Mountain Stem, Hex Lab Mini Stems are 3D cold forged from 6061-T6 aluminum alloy, giving them an incredible strength to weight ratio. Featuring a stiff, lightweight design, they are designed to fit handlebars with 1" steerer tubes and clamp diameters of 28.6mm only.Material Aluminium,Steerer Diameter 28.6mm,Clamp Size 28.6mm.
The Stay Strong Front Line Race Stem uses a fully CNC machined alloy construction with a cut-out design to drastically reduce weight. Solid bolts lock down that face plate, securing your bars in place and. Laser etched Stay Strong logos add the finishing touch to this race tuned piece. ###section### Product Specs TYPE: 22.2mm REACH: 45mm/50mm/55mm Options RISE: TBC CLAMPING DIAMETER: Front Load WEIGHT: TBC
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Direct 40 Mountain Bike StemThis direct-mount stem features a rock-solid alloy construction, which makes it more than capable of handling all the abuse that's associated with downhill racing. Spank has put this model through a CNC-machining process, which shaves off any excess material for a lower weight without sacrificing strength. Coming equipped with an adjustable rise and chamfered bar clamp zones, this version offers a more rider-tuned feel with reduced stress on any handlebars. This makes it a great choice of upgrade for riders who want a tough component for tough rides.Features: Material: CNC weight-optimised 7 series Alloy Use: MTB, Downhill and Freeriding Length: 40mm Diameter: 31.8mm Rise: 17 Technologies: Full CNC, Adjustable rise, chamfered bar clamp Manufacturer's Part Number: E06DT40020AMSPK Weight: 128gTechnologies: Adjustable direct mount stem 40mm reach balances high-speed stability and precision steering, adjustable 16-21mm rise. Human Factor cockpit setup index facilitates tuning of upsweep and back-sweep. Chamfered bar-clamp zones to reduce stress risers and improve fatigue life in any handlebars.Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Odyssey's CFL3 Stem is a minimalist style that's all about function and performance. It utilises a classic front load design and proven 6-bolt clamping system that uses larger size bolts and unique surface contouring int he clamping area to really lock in your bars. Built from fully CNC machined 6061-T6 aluminium to keep weight down without sacrificing any strength. Finished with a recessed pre-load bolt area. ###section### Product Specs TYPE: Front Load REACH: 50mm RISE: 6.5mm CLAMPING DIAMETER: 22.2mm WEIGHT: TBC