The new WTP Index stem stem offers a taller 16mm rise, which allows you to run your bars as high as some topload stems, without having to compromise on the clean and simple frontload look. The wider 48mm faceplate helps provides secure and safe clamping, and the sunken section on the top allows you to run your topcap flush with the stem. This is one smooth stem that might just surprise you. The INDEX stem uses a unique "wedge" shape, giving it a smooth look yet retaining a generous 16mm of rise for riders who prefer a taller bar position without sacrificing the classic front load stem look. With the addition of a few small spacers under your stem, you will be able to setup the INDEX stem to an equal height to many topload stems on the market. ###section### Product Specs TYPE: Front Load REACH: 50mm RISE: 16mm CLAMPING DIAMETER: 22.2mm WEIGHT: 330g
Taking inspiration from Ritchey's C260 model, the C220 gives a tighter, more secure hold, covering 220 degrees of your bar for a snug and firm fitting. In doing so, the bolt forces are more aligned, allowing for the stem body to fully embrace the bar, preventing damage and instilling confidence with motion. Flip-Flop mount compatible and easy to install and remove, the WCS C220 stem is a prime addition to your bike's steering column.
The Turbine 35 stem was designed to reduce overall system weight while retaining the proven stiffness and performance the Race Face line is known for. The stem itself is measurably stiffer than the 31.8mm offering and, although the system is a seemingly burlier build, the weight savings gained by the reduction in bar material actually makes the 35 system lighter overall. An impressively light, strong addition to your enduro/trail buildKey Features:Machined to precision with 7075 aluminium for high strength & fatigue resistance at a very light weight,Interlocking four bolt bar clamp holds bar securely in position and distributes loads away from bolts and into the body,Interlocking U-Shaped Handlebar Clamp Geometry,Faceplate eliminates stress risers which cause your bar to bend or break,Opposing bolts on steer tube clamp gives extreme clamping power while reducing stress on the steer tube,Laser etched logos.Specification:Built For: Enduro/Trail,Size: 50mm, 60mm, 70mm or 80mm,Rise: 6°,Bar Diameter: 35mm,Steer Tube Diameter: 1 1/8",Stack Height: 40mm,Weight: 140 grams(50mm).
The Atlas 35 direct mount stem is a all new 2 piece direct mount design. Super lightweight, low profile design with flush mount bolts and 5mm spacers kit to let you dial in your perfect set upKey Features:Machined from 2014 Aluminium,Weight saving single bolt faceplate,50mm length, 0mm Rise. (+5mm with spacers).Specification:Built For: DH Racing,Size: 50 mm,Direct Mount: BOXXER,Bar Diameter: 35mm,Weight:120 grams.
The Federal Session CNC stem boasts a real clean look, with a 6061-T6 aluminium CNC machined construction for rugged durability. It's been internally machined to reduce excess weight and a flush fork top cap fitting to keep your setup look clean. ###section### Product Specs TYPE: 22.2mm REACH: 48mm RISE: 30mm CLAMPING DIAMETER: Top Load WEIGHT: 329g (11.6oz)
This version of the Hope AM-FR Stem from Hope has the same great features as Hope's standard model but has been designed to accept the larger 35mm mountain bike (MTB) bars.
Ritchey WCS Chicane Road StemThis high-quality stem is optimised to reduce drag while retaining stiffness and a lower weight thanks to the use of 2014 alloy. This superb model achieves its low drag by using hidden bolts which secure its low-profile hinged faceplate from behind, a low-profile magnetic top cap and an internal steerer wedge clamp. Finally, the combination of the unique top cap and the lack of external steerer clamp bolts provide the Chicane with clean lines for a sophisticated and integrated look to the front end of any bike.Features: Material: 2014 Alloy CrMo Steel faceplate bolts Lengths: 90-130mm Angle: 80 degrees Bar Clamp: 31.8mm Steerer: 1-1/8" Steerer Height: 45.5mm Faceplate Width: 45mm Aerodynamically shaped with hidden bolts to reduce drag Internal steerer wedge clamp for an external smooth shape Unique magnetic top cap Weight: 175g (100mm version)Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The K-Edge Wahoo Integrated Handlebar System Mount Combo is the ultimate one-piece bar/stem system. That call for an elite level mount that positions your computer out-front, your light or camera hidden underneath and its aero too. The rock-solid camera mount position improves video quality by removing camera shake.For Integrated Handlebar (one piece) bar/stemPro level mount with -7-degree articulation for custom computer positioningCNC MachinedBlack AnodizedWahoo approved replaceable computer insert protects computer tabsCombo- Computer and GoPro style camera/light compatibleM5 hardware includedIf smaller bolt required, use 8.4mm washer to ensure secure fitMade in House. Boise, Idaho USALifetime warrantyCompatible with all Wahoo computers
Steerers and handlebars made of composite materials can easily be compromised by poor clamp design. To assure the integrity of the ARX clamp interface, we perform our own tests that go way beyond the demands of CEN standards. We even tested this new stem’s compatibility with other brands of handlebars and it passed with flying colours. ARX PRO is made of Al 2010 and has stainless-steel bolts. PRO offers an ideal balance to riders who insist on top-class performance at the keenest price. This group typically includes many amateurs who purchase their own equipment. PRO components often employ traditional materials such as Al 7075 and Al 6061 alloys to contain fabrication costs. But like all 3T products, they benefit from the 3T Intelligent Production Lifecycle, assuring right-first-time design and quality, at prices that meet the needs of today’s discriminating bike riders. Count on PRO components to perform to the highest levels.
Making the most of its strong aluminium build to keep you steering with precision on every ride, it features a flip-flop design for low, aggressive riding and can be reversed to give a taller position for more upright riding. With an impressive strength-to-weight ratio, it performs brilliantly across the most challenging routes, letting you manoeuvre your steering column with absolute ease from start to finish.
Light enough for AM, tough enough freeride (FR) and downhill (DH) ready Race Face Atlas stem provides the ultimate in versatility.
Pro Tharsis XC Alloy Mountain Bike StemA modern stem for today's hardy mountain rider, this cross country-centric model is durably built for the twists and turns of such a rowdy discipline. Utilising a four-bolt Headlock bar clamp and integrated adjuster, a firm and steadfast hold is assured, with a reliable engagement with the steerer providing unrivalled handling. Compatible with Shimano Di2 shifting systems, this anodised alloy stem keeps you steering with strength and composure, no matter how rough your ride gets. Features: Material: Anodised AL-7075 Alloy Bolts: Lightweight Titanium Compatibility: Shimano Di2 cable and battery integration Clamp Type: Headlock Angle: 6° Diameter: 31.8mm Buy Pro Components from Chain Reaction Cycles, the World's Largest Online Bike Store.