Optimise your efficiency and comfort by fine-tuning your stem angle with this adjustable and economical stem3D-forged and CNC-machined, 6061 aluminium, road/MTB-compatible stem,4-bolt oversized 31.8mm handlebar interface with relieved faceplate,Equipped with top cap and 4-degree, 2-degree, and 0-degree shims,Available in 12-degree, 17-degree, and 24-degree angles,12-degree: 10 position angle range: +/- 8-degree to 16-degree, in 2-degree increments,17-degree: 10 position angle range, +/- 13-degree to 21-degree, in 2-degree increments,24-degree: 10 position angle range: +/- 20-degree to 28-degree, in 2-degree increments,Compatible with composite handlebars.
3D-forged and CNC-machined from 6061 aluminum the Future Stem Comp is optimized for use with all Future Shocks (with adapter see below). It’s also compatible with our Specialized accessory mount for seamless integration. 3D-forged and CNC-machined 6061 aluminum Future Shock-optimized stem. Available in 6-degree angles and 60 70 80 90 100 110 and 120mm lengths. Compatible with the Specialized accessory mount. Not suitable for standard forks. For none 2.0 Future Shock versions you would need the shim adapter see our product ID 82856
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
If short and tall is your preference then the Subrosa Rose Upload Stem is definitely worth your attention. Using a cold-forged 6061 aluminium construction process to keep the stem affordable without sacrificing on strength, it also allows Subrosa to have a bold and unique logo branding wrapped around the sides of the Rose. Built shorter for added strength and utilising heat-treated chromoly bolts that won't break and keep you bars and stem from slipping. ###section### Product Specs TYPE: 22.2mm REACH: 48mm RISE: 36mm CLAMPING DIAMETER: Top Load WEIGHT: 310g (10.9oz)
The mount is fully adjustable allowsing you a variety of customisable positions so that you can place your cycling computer in a position that suits you and your cycling best. It frees up a lot of your frames precious space and is made from aluminium for ultimate durability.
K-Edge Garmin Adjustable Stem Bike MountThe K-Edge Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked in place by the top cap compression system. The adjustable version allows for different stem angles.Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem.Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more, including: cross country; triathlon; bike touring; or if you simply prefer this position for your computer.Features:CNC Machined 6061-T6 Aluminium Platform, Injection Moulded Copolymer InterfaceCompatibly - 1-1/8″ Steerer tube Diameter, Thickness (@ Steerer) - 5mm, Length (Centre-to-Centre) - 50mmRecommended for 0 Degree to Negative Degree Stem AnglesSupported Computers - Garmin Edge 20, 25, 200, 500, 510, 520, 800, 810, and Forerunner 310XTBuy K-Edge Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Base bar suitable for all clip-on aerobarsDouble butted 6061-T6 aluminium construction for low weight and maximum strength,Constant 26 mm diameter allows clip on aerobars to be spaced anywhere along the base bar for the perfect position,Enables the widest possible aerobar mounting currently available,Internal cable routing for aerodynamic efficiency,Matt black shot peened finish,Use the base bar with any Profile Design clip-on aerobar for the most adjustable set up possible,Also known as the Stoker bar, as it can also be used on the rear of a tandem by the stoker,Weight: 245 grams.
Easton EA70 Road Bike StemMade in a wide range of length options and rise types, the EA70 Road Bike Stem adds reliable handling and a firm hold to your road bike’s front end. Made from Easton’s 3D Forged EA70 Aluminium tubing it offers the perfect mix of performance and value. In addition to its high-quality construction, it also adopts Easton’s “TopLock” technology, which means the handlebar clamping plate interlocks with the stem body. This design reduces stress on the bolts and prevents pressure spikes on expensive carbon fibre bars. Features: Material: 3D Forged EA70 Aluminium tubing Rise: Separate 0° or +/- 7° options Handlebar Clamp Diameter: 31.8mm Steerer Tube Clamp Diameter: 1.1/8"Invertible: YesBar Clamp Design: Four-bolt, removableStem Cap Included: NoCompatible with Easton's integrated computer mount (ICM) for Garmin cycle computers (sold separately)Weight: 132g (100mm)Technologies:TopLock: Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimising loads on the bolts, making the EA70 perfectly safe for carbon barsBuy Easton Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Top load stem from Kink. This stem is made from CNC'd 6061 Aluminum and features machined sides to save weight and large 31.5m rise. ###section### Product Specs TYPE: Top Load REACH: 53mm RISE: 31.5mm CLAMPING DIAMETER: 22.2mm WEIGHT: 289g