Zipp s Service Course range is designed to offer high performance without breaking the bank. The Service Course stem is a great blend of strength, stiffness, reliability, low weight, good looks and a price tag that doesn t make you wince. The redesigned Service Course stem features a new body and faceplate design and is constructed from 6061 aluminium for an improved stiffness to weight ratio, while also offering a sharp new look that syncs beautifully with modern frame designs and integrates perfectly with Zipp s Service Course Handlebars and Seat posts. Available in a wide range of sizes it is easy to get the perfect length for your bike, while the stainless steel Torx T25 hardware is less likely to strip and won t rust over time. A simple stem it may be, but the Zipp Service Course offers a lot in a well-designed and great value package.High Performance Road Bike StemNew Faceplate And Body DesignLightweight 6061 Aluminium ConstructionStainless Steel Torx T25 Hardware31.8mm Handlebar Clamp Diameter+/- 6 Degree RiseSuitable For 1 1/8th Inch Steerer TubesWeight From 150g
Zipp s Service Course range is designed to offer high performance without breaking the bank. The Service Course stem is a great blend of strength, stiffness, reliability, low weight, good looks and a price tag that doesn t make you wince. The redesigned Service Course stem features a new body and faceplate design and is constructed from 6061 aluminium for an improved stiffness to weight ratio, while also offering a sharp new look that syncs beautifully with modern frame designs and integrates perfectly with Zipp s Service Course Handlebars and Seat posts. Available in a wide range of sizes it is easy to get the perfect length for your bike, while the stainless steel Torx T25 hardware is less likely to strip and won t rust over time. A simple stem it may be, but the Zipp Service Course offers a lot in a well-designed and great value package.High Performance Road Bike StemNew Faceplate And Body DesignLightweight 6061 Aluminium ConstructionStainless Steel Torx T25 Hardware31.8mm Handlebar Clamp Diameter+/- 6 Degree RiseSuitable For 1 1/8th Inch Steerer TubesWeight From 150g
Optimise your efficiency and comfort by fine-tuning your stem angle with this adjustable and economical stem.3D-forged and CNC-machined 6061 aluminium road/MTB-compatible stem4-bolt oversized 31.8mm handlebar interface with relieved faceplateEquipped with top cap and 4-degree 2-degree and 0-degree shimsAvailable in 12-degree 17-degree and 24-degree angles12-degree: 10 position angle range: +/- 8-degree to 16-degree in 2-degree increments17-degree: 10 position angle range +/- 13-degree to 21-degree in 2-degree increments24-degree: 10 position angle range: +/- 20-degree to 28-degree in 2-degree incrementsCompatible with composite handlebars
Funn Crossfire StemThis solid stem is perfect for MTB use as it offers a firm connection between your steerer tube and handlebars. It features a forged AL6061 aluminium construction that's amazing at withstanding all the abuse that comes with off-road adventuring.Lightweight Enduro StemIdeally suited to enduro racing, this version has been CNC-machined for the ultimate strength to weight ratio. As every gram counts, this brilliant model allows you to focus on a podium-topping finish without worrying about adding any unnecessary weight to your ride. Funn has completed this brilliant component with a wider clamping area for greater steering precision as you ride towards a podium-topping finish.Features: Material: Forged and CNC-machined AL6061 Aluminium Use: MTB, Enduro Rise: 0° Steerer Clamp: 1 1/8" Stack Height: 35mm Weight: 130g (35mm length), 156g (50mm length)Buy Funn Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Funn Crossfire 35 StemThis superb stem is specifically engineered for MTB use as it offers a tight grip between your steerer tube and handlebars. Perfect for weaving between the trails, it features a forged AL6061 aluminium construction which makes it incredibly tough when withstanding any knocks or bumps. Funn has also put this robust model through a CNC-machining machining process to shave off any unnecessary grams. This means you can enjoy its top-tier performance without any excess weight holding you back as you shred across the woodland. Features: Material: Forged AL6061 Aluminium Use: MTB Steerer Diameter: 1 1/8" Stack Height: 35mm Rise: 0° Weight: 125g (35mm length), 150g (50mm length) Buy Funn Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The new Trail stem is forged and CNC-machined to meet the demands of today's trail riding with a sublime stiffness-to-weight ratio. 3D-forged and CNC-machined 6061 alloy construction. 4-bolt oversized 31.8mm handlebar interface with relieved faceplate. Available in three lengths: 40/50/60mm Compatible with carbon composite handlebars.
Deda Elementi Zero1 StemDesigned to complement the aerodynamic shaping and efficient acceleration of modern road bike frames, the Deda Elementi Zero1 Stem boasts a 3D forged 6061 aluminium construction and sports a flat top section. Combining its innovative construction with classy decals and a low negative 82-degree angle, the Zero1 is the ideal choice for aggressive sprinters.Features: Material: 3D forged, alloy 6061 Finish: black on black (BOB ) or black glossy anodized Screws: CrMo Angle: Negative 82-degrees Handlebar Clamp Diameter: 31.7 mm Fork Steerer: 1 1/8" (28.6mm) Clamp Height: 36mm Weight: 145g (110 mm)Buy Deda Elementi Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Named after the rugged Koryak mountains in Eastern Siberia, these all-mountain components are designed to deliver maximum performance and reliability Squared forged design gives the perfect blend of lightness and torsional rigidity Made from 3D forged and machine finished 7075 aluminium for high strength and excellent resistance to corrosion Machined headlock four bolt front clamp for increased lateral rigidity with wide bars Oversized 31.8 mm clamp diameter reduces unwanted flex under high load by increasing strength and rigidity Di2 compatbile version with internal routing for Shimano E-tube cables Zero rise in 35 - 60 mm Durable anodised finish Laser etched logo graphics For 1-1/8 inch fork steerers Weight: From 110 grams
The new Zero1 stem is the perfect combination of stiffness, lightness and a refined aero shape. It's made from 6061 aluminium and it's manufactured using an innovative 3D forging process.The flat top section of the stem perfectly mathes the top tube of a modern road bike. Designed from the start for the most demanding riders at an unbeatable quality to price ratio.Key Features:Material: 3D forged alloy 6061,Angle: 82deg,Handlebar Dia: 31.7mm,Weight: 145g (110mm).
Key Features:Double adjust,Material: aluminum, 3D forged,Two fold angle adjustable from 0? to 90?/ -80? to +80?,Handlebar acceptance: 31,8 mm,Clamping height 43mm,Weight: 272 gr..
Deda Elementi Zero1 Road StemLightweight, aerodynamic and rigid, the Zero1 road bike stem will improve your bike’s handling and performance. Made from 6061 aluminium, it benefits from Deda Elementi’s advanced 3D forging process. This results in accurate handling and efficient power transfer as you’re sprinting and attacking the climbs. In addition to this, its flat top section matches the look of modern road bike frames and it’s reversible so you can obtain your desired riding position.Features: Material: 6061 3D forged Aluminium, embossed "D" logo Drop: 36mm Screws: Chromoly (CrMo) Angle: +7° / -83° Invertible: Yes Stem Cap Included: No Weight: 145g (110mm) Manufacturer's Part Numbers:Black - Black 90mm: DSH90BBlack - Black 100mm: DSH100BBlack - Black 110mm: DSH110BBlack 120mm: DSH120BABlack - Black 130mm: DSH130BBuy Deda Elementi Components from Chain Reaction Cycles, the World's Largest Online Bike Store.Black - Black 130mm: DSH130BBlack - Black 90mm: DSH90BBlack 120mm: DSH120BA Black - Black 100mm: DSH100BBlack - Black 110mm: DSH110B
The new Federal Element Front Load Stem joins the top load range as a stronger and cheaper alternative to the previous Love and Hate stems. It's manufactured from 6061-T6 Alloy with a CNC top cap recess and a bold Federal logo on the top plate. ###section### Product Specs TYPE: 22.2mm REACH: 50mm RISE: 5mm CLAMPING DIAMETER: Front Load WEIGHT: 295g (10.4oz)