Thread the nut onto the TNS, insert into the fork stack, and tap it in with a hammer. Sets the starfangled nut to 15mm and keeps it straight. Long handle helps prevent pinched fingers.
Ready for downhill domination, this excellent Diamond D1 version features an aluminium main build and magnesium-cast lowers, giving a reliable and robust performance on every adventure. Giving you six clicks of low-speed compression adjustment and 24 high-speed changes, fine-tuning the fork for your impending route is made easy, while Off The Top (OTT) adjustment to the negative spring improves the small bump sensitivity and stroke feel. Shim stack-controlled damping and a closed cartridge bladder system allow you to customise how rowdy you like your run to be through the use of different configurations, making this stiff and supportive fork an impressive choice for the venturesome rider.
Made for enduro excellence, this confidence-instilling Diamond D1 version has an aluminium main build and magnesium-cast lowers, for a reliable and durable performance at every turn. Giving six clicks of low-speed compression adjustment and 24 high-speed adjustments, fine-tuning is made easy, while Off The Top (OTT) adjustment to the negative spring improves the small bump sensitivity and stroke feel. Shim stack-controlled damping and a closed cartridge bladder system allow you to customise how rowdy you like your run to be through the use of different configurations, making this stiff and supportive fork an impressive choice for the venturesome rider.
Race-ready, this fantastic Diamond D1 model boasts an aluminium main build and magnesium-cast lowers, giving a durable and dependable performance ride after ride. With six clicks of low-speed compression adjustment and 24 high-speed tweaks available, fine-tuning your suspension for the ride ahead is easily done, while Off The Top (OTT) adjustment to the negative spring enhances small bump sensitivity and stroke feel. With shim stack-controlled damping and a closed cartridge bladder system, customising the smoothness of each race through different configurations puts the rowdiness of your ride fully in your hands. An excellent choice for the enduro specialist.
Ready to smooth out every terrain in your way, this confidence-instilling, Boost-sized fork has an aluminium main build and magnesium-cast lowers for a stiff, responsive and sturdy performance no matter what. Giving six clicks of low-speed compression adjustment and over 30 high-speed adjustments, no bump or landing is too intimidating, while the Off The Top (OTT) and Advanced Volume Adjust (AVA) features work together for better small bump sensitivity and control of your full stroke. With 14 clicks of shim stack-controlled damping and a closed cartridge bladder system, customising the rowdiness of your run using different configurations is encouraged, making this stiff and supportive fork an impressive choice for the aggressive and exhilarating rider.
Ready to race, the dazzling DVO Diamond D1 model is built around aluminium stanchions and magnesium-cast lowers, giving a long-lasting and dependable performance. Giving you six clicks of low-speed compression adjustment and 24 high-speed tweaks, fine-tuning your suspension to your favoured spec is easily achieved, while Off The Top (OTT) adjustment to the negative spring gives better small bump sensitivity and stroke feel. Featuring shim stack-controlled damping and a closed cartridge bladder system, the DVO Diamond D1 29 flattens each run and with it different configurations, it's as versatile as it is customisable. It's an excellent choice for the enduro and downhill enthusiast. The updated Diamond has a host of features to cater to the aggressive rider who demands more. DVO gave the fork a top to bottom chassis overhaul with 10mm wider BOOST spacing. This amplifies steering precision and control in the moments of "ultimate shred". DVO also increased the tyre clearance, allowing you to utilise a bigger tyre and still have clearance for mud. Combining the stiff chassis characteristics with DVO's exclusive features and damping design gives DVO forks a unique ride feel unlike anything else on the market.
Helping you take your adventures further than ever before, this brilliant version eliminates all moving parts from its design. This means there is zero maintenance while its monocoque carbon fibre structure delivers incredible strength and stiffness. Rigorously tested in Lauf's lab, its springs are constructed from a super-strong S2 glassfibre which is extremely tough during impact and flexible in the direction of the travel. 30mm Travel Gravel Fork Providing you with 30mm of travel with a progressive spring rate, the further this fork compresses the more its springs become stiffer. This means you'll benefit from a more versatile component which prevents bottoming without sacrificing small bump compliance. Working flawlessly in all weather conditions, this is the ultimate choice of upgrade for riders who want top-level front suspension.
Perfect for replacing your lost or damaged stock axle, this sturdy model features a 7075 T6 aluminium construction. This makes it more than capable of handling all the abuse which comes with long rides in the mountains. Unlike similar products, this version uses a captive steel washer under its head to reduce friction on your fork's legs. This protects your expensive fork's, transfers more of the tightening torque to clamping load for a stiffer interface and prevents it from sticking when you want to remove it.
Whether you're competing in an event or exploring the woodland after work with your buddies, these fantastic forks are engineered for maximum performance. Specifically designed for use with 29er bikes with longer travel, these use a 36mm chassis for smooth and effective damping across unpredictable riding conditions. Adjustable Boost MTB Forks Allowing you to conquer every challenge from the mountain slopes to the forest floor, these off-road warriors are kitted out with a Roughcut HLR damper. This allows you to effortlessly tweak their high and low speed compression, rebound and air pressure to match your riding preferences and the terrain conditions. This combined with a superb air spring gives you the freedom to benefit from a more controllable and customisable riding experience wherever your next adventure leads you.
With this part installed on your forks, there is no more need to tinker around with bottomless tokens or spacers to find the right travel progression. This means you can quickly tweak the fork’s volume control on the go, which is ideal if you’re out on an all-day session on different types of trails. Being able to tune both the air pressure and the damper settings enable you to prevent bottom-out and to isolate big hits. Compatibility: RockShox Model A · will fit 2013-2016 Pike forks with 15x100 axle spacing. Not compatible with Dual Position Air forks. Recommended for 140mm+ 29”, 27.5+, 26” and 27.5” forks. · will fit 2010 - 2017 and Boxxer World Cup (air-sprung) forks. Not compatible with Dual Position Air forks. RockShox Model B · will fit 2015 and newer Pike forks with "Boost" 15x110 axle spacing and all 2017 and newer Pike forks (regardless of axle spacing). Not compatible with Dual Position Air forks. Recommended for 140mm+ 29”, 27.5+, 26” and 27.5” forks. · will fit all 2017 and newer Lyrik and Yari forks. Not compatible with Dual Position Air forks. Recommended for 140mm+ 29”, 27.5+, 26” and 27.5” forks. · will fit all 2017 and newer Revelation (35mm). Not compatible with Dual Position Air forks. Recommended for 140mm+ 29”, 27.5+, and 27.5” forks. · will fit 2020 Boxxer World Cup (air-sprung) forks. Not compatible with Dual Position Air forks. RockShox Model C · will fit 2013-2016 Pike forks with 15x100 axle spacing. Solo air models only. Recommended for 120 and 130mm 29” and 120mm 26” and 27.5” forks. Not compatible with Dual Position Air forks. Recommended for 120 and 130mm 29”/27.5+ and 120mm 27.5” and 26” forks. RockShox Model D · will fit 2015 and newer Pike forks with "Boost" 15x110 axle spacing, all 2017 and newer Pike forks (regardless of axle spacing). Not compatible with Dual Position Air forks. Recommended for 120 and 130mm 29”/27.5+ and 120mm 27.5” and 26” forks. · will fit all 2017 and newer Revelation (35mm). Not compatible with Dual Position Air forks. Recommended for 120 and 130mm 29”/27.5+ and 120mm 27.5” forks. RockShox Model E · will fit 2013 and newer Reba, Revelation (32mm models only), and SID forks and 2014 and newer Rock Shox Bluto forks. Not compatible with Dual Position Air forks. Recommended for 100-140mm 29”, 27.5+, 27.5”, 26”, and Fat forks. RockShox Model F · will fit 2020 and newer Zeb forks. Not compatible with Dual Position Air forks. Compatible with all travels and both wheel-size options. Fox Model A · will fit 2016 and newer Fox 34 Float forks with the FIT 4 and Grip dampers. Recommended for 140-160mm 29”, 27.5+, and 27.5” forks. Fox Model B · will fit 2016 and newer Fox 34 Float forks with the FIT 4 and Grip dampers. Recommended for 110-130mm 29”, 27.5+, and 27.5” forks. Fox Model C · will fit 2016 and newer Fox 32 Float forks with the FIT 4 and Grip dampers. Recommended for 100-130mm 26”, 27.5” and 29" forks. Fox Model D · will fit 2015-2017 Fox 36 Float forks with the FIT 4, RC2, and Grip dampers. Recommended for 140-180mm 29”, 27.5+, and 27.5” forks. Fox Model E · will fit 2016 and newer Fox 40 Float Factory and Performance Elite forks. Fox Model F · will fit 2018-2020 Fox 36 Float forks with the FIT 4, RC2, and Grip dampers. Recommended for 140-180mm 29”, 27.5+, and 27.5” forks. · will fit 2019-2021 Marzocchi Z1, all travel options. Fox Model G · will fit 2021 and newer Fox 38 Factory and Performance forks.
Designed for the roughest of mountain bike trails, the robust Marzocchi Bomber Z1 fork features an alloy construction. This makes it incredibly durable as you blast across the woodland with power and precision. Marzocchi has also gone the extra distance by using its massive 36mm stanchions to give you a superior ride quality over the roughest of terrain conditions. Adjustable FIT GRIP Damper Keeping your ride under control, the fantastic trail-ready Marzocchi Bomber Z1 Boost fork is also kitted out with an adjustable FIT GRIP damper. This cartridge style damper allows you to easily tweak its compression and rebound to maintain a consistent riding experience across unpredictable surface conditions. Another benefit of its damper is its combined LSC/HSC compression adjustment which ranges from open to lockout. This means you'll benefit from being able to ride in an open or locked position depending on the terrain. EVOL Air Spring Ready for the wildest of mountain bike rides, this Boost-compatible fork is equipped with an EVOL air spring. It works by increasing negative air spring volume to specifically provide optimum small bump sensitivity. This allows you to benefit from a smoother performance as you pedal over the rock gardens, tree roots and debris with momentum. Ideal for riders who want an MTB fork that delivers amazing front-end suspension, this is the ultimate choice of upgrade for confident and reliable performance.
The Marzocchi Bomber DJ forks are enhanced with the GRIP damper, which delivers lightning-quick reaction times to soak up everything from big hits to trail chatter. This damper is also highly adjustable, so you can dial in your exact preference to suit your riding style and the terrain type. Features Continued: Dedicated 26" wheel configuration delivers shortest possible crown height for flickable front end Legendary Bomber durability with 36mm stanchions Buttery and easy-to-use GRIP damper Tapered steerer tube for maximum stiffness Manufacturer Reference Codes: Black: MAZ-912-01-112 Red: MAZ-912-01-111