Light Modes Cateye’s Sync Core front light comes with five different light modes which can easily be toggled through to pick the best light mode for your current lighting environment and remaining battery life. The light also comes with a light memory mode system that means when you turn the light on it will still be in the last mode that you selected. The light modes included are: Mode One (High): 500 lumens light output – 2 hours battery life Mode Two (Middle): 150 lumens light output – 9 hours battery life Mode Three (Low): 100 lumens light output – 15 hours battery life Mode Four (Daytime HyperConstant): 500/100 lumens light output – 18 hours battery life Mode Five (Flashing): 100 lumens light output – 130 hours battery life CatEyeSYNC Technology When using multiple different bike lights and devices you can gain full control over all your lights using CatEyeSYNC technology. The technology exists in the form of a smartphone app which allows you to see all your light’s differing battery lives and allows you to have full control over your differing light modes. Side Visibility The Core light comes with Cateye’s OptiCube lens technology which creates a rounder beam pattern that provides excellent levels of side visibility. This is important when you’re cycling through built up urban areas where you’ll often be forced to traverse several lanes of traffic and find yourself dealing with motorists from multiple different angles. USB Rechargeable To save you the constant hassle of having to change your bike light’s batteries the Core comes with a rechargeable Li-ion battery. The light’s power button also doubles as a battery level light, so you know when it’s time to recharge with or without the use of the CatEyeSYNC app. The light comes with a micro-USB charging cable that makes it easier than ever to charge on the go via any standard USB port.
USB Rechargeable Cateye’s Sync Wearable comes with a Micro-USB cable that allows you to charge the bike light via any standard USB port. This allows you to charge on the go and saves you the hassle of having to find and replace your light’s bike lights. Mounting The light also comes with versatile mounting options and comes with a clip-on bracket and a rubber strap. The clip-on bracket provides easy installation of the light to backpacks, saddle bags, or clothing. Meanwhile the rubber strap allows you to easily connect the light to your seat-post on a large range of different bike frame types. Side Visibility Cateye’s Sync Wearable comes with OptiCube lens technology which optimises the light’s visibility. The lens not only provides crystal clear lighting but also splits the light to ensure excellent levels of side visibility helping you stay seen from multiple angles. Light Modes Small but mighty the Sync Wearable comes with six different light modes that can easily be toggled between allowing you to find the best possible lighting for your current environment or battery life. The light modes included: Mode One (High): 30 lumens light output – 1.5 hours battery life Mode Two (Low): 2 lumens light output – 18 hours battery life Mode Three (Flashing): 50 lumens light output – 45 hours battery life Mode Four (Rapid): 50 lumens light output – 16 hours battery life Mode Five (Group Ride): 50 lumens light output – 12 hours battery life Mode Six (Daytime HyperFlash): 50 lumens – 25 hours battery life CatEyeSYNC The Sync Wearable comes with Cateye’s new CatEyeSYNC that is a smartphone application that allows you to sync all your lights. With the use of the app you can turn all your bike lights on and off with just one quick touch. The app also provides you with full control for each of your lights during, before and after cycling. Some of the best features included with the app are: Pairs up to seven different bike lights Customises light modes View remaining battery level Turn on and off synchronization of lights Find me function - lets the lights flash by tapping a single button on the app
Featuring five bright LED lights that utilise Omni Directional Technology for 360-degree visibility and with three flashing modes - constant, rapid and flashing mode, this highly efficient rear bike light will make sure you're always seen. With two AAA batteries, the Cateye Omni 5 rear light will run up to 120 hours. The simple, tool-free FlexTight bracket and included clothing clip allow you to easily attach it anywhere you like. The light comes with 3 different light modes to suit your environment or battery life. The modes are: Rapid: 120 hours runtime Flash: 90 hours runtime Constant: 60 hours runtime
Visibility This item comes with specialised Opticube lens technology which offers supreme light distribution. Integrated into the design of the light is side lighting which significantly widens the beam and enhances side visibility helping you to remain seen from multiple angles. Durability To protect your light from all the bumps and scrapes of the road the light comes with a robust 6063 aluminium body construction with enhanced scratch resistance. Additionally, the housing shields from adverse weather conditions with an IPX7 water rating. Light Modes Ready to suit the needs of any ride The Cateye AMPP 800 comes with multiple different light modes which can easily be switched between by using the top power button – double click for High mode, and a single click returns the light to the previous mode. High: 800 lumens – 1.5 hours Medium: 400 lumens – 2 hours Low: 200 lumens – 4 hours Daytime HyperConstant: 200/800 lumens – 4 hours Flashing: 200 lumens – 30 hours Charging This powerful front bike light comes with an internal lithium-ion battery that is USB rechargeable and fully recharges in 3-7 hours. The illuminated top power button will illuminate in red when the battery is at 20% which lets you know when it’s time to recharge the light. Mounting To securely and easily mount the light it comes with the FlexTight mounting bracket which is versatile and works with bars up to 35mm diameter bars and selected aero bars. The underside connection offers easy removal for a quick release which is great for commuters. Specifications Maximum Lumen Output: 800 lumens Battery Type: Lithium-ion (3.7V 2500mAh) Recharge Time: 3-7 hours Water Rating: IPX4 Weight: 136g
All new LED head light with 3 powerful LED’s and 180 degree visibility.• Triple LED with Opticube lens technology• All-round visibility• 3 modes: Rapid / Flash / Constant• Runtimes: 50hr / 150hr / 50hr• Flextight bracket and belt clip includedCateye Omni 3 Tl-ld135 3 Led Rear Cycle Light -All new LED Tail light with 3 powerful LED’s and 360 degree visibility.• Triple LED with Opticube lens technology• All-round visibility• 3 modes: Rapid / Flash / Constant• Runtimes: 200hr / 150hr / 100hr• Flextight bracket and belt clip included - See more at: http://www.cyclestore.co.uk/beta/productDetails.asp?productID=56887&categoryID=107#sthash.fhznhWJU.dpuf
Pair of micro USB rechargable super bright Led lights with 1 bulbs each and 2 functions.
Pair of Led lights with 3 bulbs each and 3 functions. 2 AAA batteries included.
Pair of Led lights with 5 bulbs each and 3 functions. Front requires 4 AAA batteries, rear requires 2.
Front:600 Lumen CREE T6 Super Bright White LED,Alloy Body,100% 600 Lumen,35% 219 Lumen,Flash.Rear:COB Super Bright Red LED,Alloy Body,Single Press: High 100 Lumen - Medium 50 Lumen - Low 30 Lumen,Double Press: Flash - Quick Flash - Strobe,Long Press,Power Off.
Font:Light source: 1 Watt White LED with bracket,Luminous Flux: 120 lumen,High - Steady - Flash - Off with low battery indicator,Battery: 3.7V 420mAh Proprietary Lithium,USB rechargeable,Waterproof: IP44,Can be installed vertically or horizontally,Run Time: 2hrs,Silicone Bracket.Rear:Light source: 1 Watt Red LED with bracket,Luminous Flux: 65 lumen,4 Steady - Flash - Off with low battery indicator,Battery: 3.7V 450mAh Proprietary Lithium,USB rechargeable,Waterproof: IP44,Install vertically or horizontally,Run Time: 2hrs,Silicone Bracket.
The new DayBright pulse pattern is designed to cut through the distractions of busy roads and visual noise in modern motoring and is visible from over a kilometre away, even in the brightest of sunlight. With more than a 10% increase in power, the Trace MK2 is the light of choice for the cyclist who needs a super compact unit with USB convenience and superb build quality. Featuring DayBright pulse pattern to cut through the distractions of busy roads, Optimised Mode Selector with 3 brightness levels, side illumination and Fuel Gauge making it clear when you need to recharge. The Trace ensures you stay visible, both day and night, in the urban jungle. Also available in a pack with the TraceR rear light. DayBright Bespoke pulse pattern designed for daylight use which is more conspicuous than a regular pulse and visible from over a kilometre away, even in the brightest conditions. DayBright mode will get you noticed. Be Seen Be Safe. Optimised Mode Selector (OMS) Various programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast. Cable Free Design (CFD) Battery is housed within the body of the light so there are no cables or separate battery units giving a neat solution with less opportunities for water ingress, mounting difficulties and crash damage. Combined with the renowned quick release handlebar bracket lights are easy and quick to mount with rock solid attachment. Intelligent Thermal Management (ITM) Patented circuitry within the light will reduce power to the LEDs, if they go beyond the optimum temperature, keeping the light as efficiently as possible to maximise output and battery capacity. Once cooled the output is automatically restored. Fuel Gauge Using a traffic light system remaining runtime is easily monitored at a glance so you’re not caught out. The colour feedback is also used for mode selection, before defaulting back to runtime. Specifications: Output: 125 lumens (Measured) Weight: 35grams Burntime: Min 3 hrs Max 24 hrs pulsing Battery Capacity: 700 mAh Li ion Dimensions (mm): Length - 57, Head - 28, Back – 19 LED: 1x XPG2 In the Box: Trace Mk2, QR Handlebar Bracket, MicrUSB Charge Cable, QS Guide Use: Trail/Enduro: 0% XC/CX: 0% Road/TT: 100% Commute/Urban: 100%
The Blaze inspires confidence, with a high capacity Lithium Ion battery it produces both a powerful output and long burntimes. Featuring DayBright pulse pattern to cut through the distractions of busy roads, Optimised Mode Selector with 3 brightness levels, side illumination and Fuel Gauge making it clear when you need to recharge. With long burn times, the Blaze is the perfect partner for your weekly commute or Transcontinental adventure, both day and night. Specification: Output: 80 lumens red Weight: 77grams Burntime: Min 6 hrs Max 48 hrs pulsing Battery Capacity: 1500 mAh Li ion Dimensions (mm): Length - 70, Head - 28, Back – 28 In the Box: Blaze Mk2 DAyBright, QR Seatpost bracket, Charger, USB charger cable, QS Guide Technologies: DayBright Bespoke pulse pattern designed for daylight use which is more conspicuous than a regular pulse and visible from over a kilometre away, even in the brightest conditions. DayBright mode will get you noticed. Be Seen Be Safe. Cable Free Design (CFD) Battery is housed within the body of the light so there are no cables or separate battery units giving a neat solution with less opportunities for water ingress, mounting difficulties and crash damage. Combined with the renowned quick release handlebar bracket lights are easy and quick to mount with rock solid attachment. Intelligent Thermal Management (ITM) Patented circuitry within the light will reduce power to the LEDs, if they go beyond the optimum temperature, keeping the light as efficient as possible to maximise output and battery capacity. Once cooled the output is automatically restored. Optimised Mode Selector (OMS) Various programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast. Fuel Gauge Using a traffic light system remaining runtime is easily monitored at a glance so you’re not caught out. The colour feedback is also used for mode selection, before defaulting back to runtime. Smart Port Technology Plus (SPT+) Smart Port+ enables the charge port to accept auxiliary accessories such as rear lights, remote switches, Support Cells and use your light as a power bank to charge USB devices.