◌DMR V11 Flat Mountain Bike PedalsAdopting the same large and stable platform as seen on DMR’s award-winning Vault flat pedals, the V11 model will keep your foot locked in place as you smash down the descents. Made from a tough reinforced nylon composite and a strong CrMo (Chromoloy) axle, they have 11 pins on each side so you can stay in control and get the power down when it’s time to accelerate.Flat Pedals with 22 Grip PinsThese flat mountain bike pedals bring you enduro trail-ready performance at a more affordable price point. With their concave shape, these pedals allow your feet to sit deep into the centre for supreme stability. V11’s durable glass-reinforced nylon body features eleven replaceable steel pins each side for rock-solid grip.Fully Serviceable PedalsAll pins are secured with captive locknuts for ultimate durability and the outer pins are Vault Moto pins that sink deep into your shoe, keeping your feet well and truly planted. V11 is fully rebuildable with the same proven internals as DMR Vault pedals, guaranteeing ride after ride with no-nonsense performance.Features: Material: Durable glass-reinforced Nylon body Axle Material: Strong 4140 CrMo (Chromoly) black steel axles with 6mm hex key fitting Platform Size: 105x105mm Axle Size: 9/16" Bearing Type: Sealed cartridge bearings Use: All Mountain, Enduro Low profile body with concave footbed 22 Tuneable pins with outer Moto Pins for serious grip (11 pins per side) Fully serviceable for long life Weight: 450g (pair)Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The heart of the Morvelo range, with more than 10 years of development up its sleek, raw-cut sleeves. Our Standard jersey features premium fabrics, with the expected 3 cargo pockets round the back (angled for easy access) and unmistakeable Morvelo graphics all over. You can't go wrong.Features:Long raw-cut aero sleevesLightweight and breathableAntibacterialBioActive Wicking treatmentThree large rear cargo pocketsReflective detailsSun Protection Factor 30+Fabric100% polyester
Take your training to new heights in the ultra-comfortable Under Armour Women's Fly By Anywhere Shorts. The lightweight woven fabric is highly durable and the soft knit waistband and internal drawcord deliver a great fit that's secure and adjustable. Breathable mesh panels allow air to circulate and disperse heat as your workout heats up and sweat-wicking material draws moisture away from your skin and dries really quickly so you stay focused and free from distraction. The crossover, shaped hem gives a streamlined and stylish look and a reflective logo works to keep you seen in low light. Care Instructions Machine wash cold with like colours. Use only non-chlorine bleach when needed. Tumble dry low. Do not iron. Do not use softeners. Do not dry clean.
With motion-friendly 4-way stretch and water repellent fabrication, this Factory Pilot Lite Short lets you focus on the trail in advanced, functional comfort. An interior silicone grip on the waistband and Velcro® waist adjustment deliver an ideal fit and lasting comfort, while a loop and snap detachable inner short provides quick convenience and versatility. An exterior pocket with reverse zip garage and camlock puller holds your trail essentials, and a 22” length provides plenty of coverage against trail and debris hazards. It’s finished with an iconic Factory Pilot logo for style points. Material Details: 4- way stretch provides freedom of movement and superior comfort Water repellent treatment repels water to keep fabric surface dry and comfortable Additional Details: Coil zip and hidden snap button closure Branded inner silicone grip on waistband resists slippage Velcro waist adjustment for ideal fit Exposed pocket with reverse zip garage and camlock puller for easy storage of essentials Drop tail hem provides ideal coverage Loop and snap detachment for inner short allows functional convenience 22” 1/4 length
Velotoze Short Overshoes 2.0The VeloToze Short Overshoes 2.0 are more durable and easier to fit than their predecessors. A special coating has been added to the inside to make these version 2.0 shoe covers easier to dry out and use time and time again.VetoToze have kept everything much loved about their Velotoze overshoes, namely completely waterproof and lightweight performance, but have addressed some of the issues on those first-generation designs. First and foremost the durability has been improved, with reinforcements on the bottom and in the toe area. A special coating has also been added to the inside of the covers so they're easier to dry and use again. Win-Win. VeloToze Short Shoe Covers are designed for road cycling on cold, rainy or snowy days. Whether it’s race day, training day or just another commute day, VeloToze Tall Shoe Covers will keep your feet dry, warm and comfortable.HOW TO FIT YOUR VELOTOZE OVERSHOESDue to the fully flexible design without zippers or velcro there is a recommended method for getting the VeloToze on. Once you've mastered it you'll find it does become second nature and a simple, easy process.1: Put on sock and bike shoe2: Pull shoe cover over toe of shoe3: Then pull shoe cover over heel, being careful not to catch on cleats4: Ensure no part of shoe covers are over cleats or heel pad. Pull shoe cover off of cleats and heel pad if necessary.CARE INSTRUCTIONSTo clean shoe covers/overshoes, wipe with a cool, wet cloth. Do not put shoe covers in the clothes washer.To dry, hang shoe covers/overshoes over a hanger or ledge or wipe with a dry cloth. The material does not absorb water, so they should dry quickly. Do not put shoe covers/overshoes in the clothes dryer.After repeated use, apply talcum or baby powder to inside of shoe cover/overshoe to prevent stickingTIPSTo prevent water from entering the shoe from the bottom of the shoe, remove insole of shoe and place tape over vent opening. Avoid contact with sharp objectsDo not store in direct sunlightFeatures:Materials: 100% RubberWaterproof: designed to form a tight seal with your calf, to keep your feet and shoes dryWindproof: windproof materials keep your feet warm even on cold morning or winter rides (5C/40F to 16C/60F)Reinforced: reinforced on the bottom and in the toe area for increased durabilityLightweight: made of a flexible, lightweight material that doesn't retain water when wetNo zippers or velcro straps : innovative overshoe design has no vulnerability points, like zippers or velcroAerodynamic: smooth, flexible material creates a form-fitting designCompact: easily fits in jersey pocket or saddle bagBuy Velotoze from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Digital Pressure GaugeThe LifeLine Digital Pressure Gauge provides exceptional accuracy and hassle-free performance. Enabling to you achieve the perfect pressure rating for your tyres, it not only can give you an accurate pressure reading within 3 seconds, but is compatible with Presta and Schrader valves while also featuring a 'Bleed Valve' enabling you to fine-tune the inflation.Perfect Inflation PressureTo increase accuracy and functionality even further it features both 'Calculation Mode' enabling you to measure the inflation of the tyre and 'Adjustment Mode', which allows accurate pressure measurement as you use the bleed valve to achieve the perfect inflation value. Features: Max Pressure: 160 psi Valve Type: Presta & Schrader Pressure Adjustment: Bleed Valve Inflation Units: PSI, BAR, KPA, KG CM2 Display: LCD Backlit Power Saving: Auto Power-OffBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
When you’re entering the pinball section on the Fort William World Cup downhill track or you’re flying blind on the most demanding enduro terrain at an Enduro World Series race there’s no time to be thinking about your wheels. Deemax is designed to absorb big hits and perform flawlessly on the roughest terrain giving pros and weekend warriors alike the confidence to push their limits.Developed with input from our top pro athletes this is one of the most durable wheelsets ever produced for hardcore gravity riders. It has been put to the test over and over again and recently delivered DH pros Laurie Greenland and Marine Cabirou to their first World Cup wins on the deadly Black Snake Track in Val di Sole Italy. The alloy rims feature a 28mm internal width with a triangular shape that helps absorb huge any impacts from rocks to hard landings and big compressions. Our Black Shied treatment gives them a distinctive finish and protects the rims against impacts and scratches. We chose a classical J-bend spoke construction using 28 steel spokes (same spoke length throughout) double-butted and bladed for the perfect balance of vertical compliance and strength to handle the abuses of aggressive gravity riding.The hubs benefit from our strongest bearings and the rear hub features the ultra-reliable ID360 double ratchet system for fast engagement to help you accelerate out of the corners. It’s set up for either Boost or DH hub spacing frames and has 6-bolt disc mounts. It’s available for Shimano HG9 XD and Micro Spline freewheel bodies in 27.5” and 29”. The wheels include UST tubeless valves spare spokes and accessories. Key benefits Hammer through rough terrain with confidence Wider 28mm (internal) rim is engineered to absorb heavy impacts. Developed for our pro riders to conquer the harshest DH and enduro racetracks. Proven by pros Developed tested and proven to meet the standards of World Cup DH racers and ready for hardcore bike park shredders or big mountain enduro riders. Easy to maintain Fast and easy to repair thanks to J-bend spokes. Two replacement spokes delivered with every wheelset. Rims Material: Maxtal Material: S6000 Aluminum SUP welding technology Drilling: traditional UST Tubeless Ready Internal width: 28 mm ETRTO size 275: 584x28TC ETRTO size 29: 622x28TC Black Shield treatment (protects your rim against impacts and scratches) Asymmetrical rim design Spokes Lacing: front and rear crossed 3 Material: steel Nipples: steel ABS Count: 28 front and rear Delivered with UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) Pre-installed tubeless rim tape 2 replacement spokes with each wheel 20X110mm boost adapters delivered with front Boost wheel 20X110mm NON-boost adapters delivered with NON boost front wheel 12X150 adapters delivered with 12X157 rear wheel Hubs Instant Drive 360 freewheel technology QRM Auto bearing preload technology DH spacing axles: 12X150 12x157 Hub available for 6-bolt brake rotors Axles: Front 15X110 Boost ; Rear 12X148 Boost Intended use ASTM CATEGORY 5 : GRAVITY RIDING FOCUSED ON THE DESCENT Recommended tire sizes: 60mm to 76mm (235 to 30) For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 150kg bike included Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 32bar/46PSI with a 47mm tyre - 285bar/41PSI with a 64mm tyre Versions Disc standard : 6 Bolts only Freewheel: SRAM XD Shimano HG9 Shimano Micro-Spline Diameter: 275'' and 29'' Compatibility Front axle: 15x110 Boost convertible to 20x110 Boost thru axle with adapters (6-bolts hub only) Freewheel: Shimano HG9 XD or Micro Spline Rear axle: 12x148 Boost thru axle Front axle: 15x110 Boost thru axle Boost Axles : 15X110 ; 12X148 DH spacing axles: 12X150 12x157 12X157-7speed Compatible Adapters and freewheel bodies ID360 Shimano HG9 alloy freewheel body (V3780101) Boost : 20x110 boost front hub cap (V2680401 - Delivered with the wheel) Boost 20 to 15mm front adapter for 6-bolts hub only (12982801) - Delivered with the wheel Boost : Torque Caps for 6 bolts hub (V2650401) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
SRAM s Powerlink requires no tools to fit. The connecting pin is light, quick, and easy to use. Ideal if you ride many miles on long rides and don't want to be stranded with a snapped chain. Use a chain tool to remove the broken link then fit a spare pair of these on and away you go! Compatible with SRAM's mountain and road 11-speed chain.
microSHIFT XCD 11 G113 11 Speed CassetteComing equipped with robust steel cogs and an aluminium spider, this 11 speed mountain bike (MTB) cassette delivers a superior strength to weight ratio. Thanks to its trail-ready spider carrier, this model lessens wear on your hub's cassette body, while also saving weight, so you can enjoy maximum performance without adding any unnecessary excess grams to your drivetrain. microSHIFT has also put this version through an electrophoretic deposition (ED) coating process, which gives it a thick black finish for extra toughness as well as a sleek appearance on your ride. With continuously moulded cogs to achieve a high standard of durability and straightness as well as compatibility with standard HG cassette hub bodies, this cassette is a perfect choice of upgrade for reliable performance on the trails.XCD SeriesXCD is all about packing quality features and innovations into a cassette that's compatible with Shimano 11 speed mountain bike drivetrains, all at the highest quality level.Features: Cogs Material: Steel Spider Material: Aluminium Coating: ED Black Use: Mountain Bike (MTB) Speed: 11 speed Tooth Count: 11-46T Combination: 11-13-15-18-21-24-28-32-36-40-46 Spider: Yes Hub Compatibility: Standard Freehub Compatible microSHIFT Groupset: XCDTechnologies: Compatible with standard HG cassette hub bodies. Continuously moulded cogs achieve a high standard of durability and straightness. Spider carrier reduces wear on aluminium cassette hub bodies.Manufacturer's Part Number:: CS-G113 11-46 Black 11-46TBuy microSHIFT Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM's Eagle drivetrains set the benchmark for mountain bike drivetrains and now that same technology is now available at even more affordable level thanks the new NX Eagle DUB groupset. Using all the technology crammed into their higher-end groupsets, NX Eagle sets a new standard for performance and value for money.11-50t cassette provides massive gear range and fits on regular freehub bodyForged aluminium cranks are strong & incredibly stiff while steel X-Sync 2 chainring provides excellent chain retentionRear derailleur features a Type 3 clutch to provide perfect chain retention and smooth shiftingErgonomically designed trigger shifter shifts between gears seamlessly, even under loadSmooth shifting & highly durable chain with cutting-edge Flow Link designSuitable for bikes with 135/142mm rear axle spacingThe centrepiece of SRAM's Eagle drivetrains are the 12-speed cassettes, and the PG-1230 Eagle Cassette forms the centrepiece of the NX Eagle groupset, by providing the same wall climbing 50t bottom cog as the other groupsets, while the use of an 11t top cog means the cassette fits on a regular 8/9/10 speed splined freehub, meaning lower cost and better compatibility. Based around SRAM's DUB 28.99 axle standard, the NX Eagle DUB crankset features 6000-series forged aluminium arms that are both strong, stiff and lightweight and when used in conjunction with SRAM's DUB bottom brackets provide a smoother running and more durable system. The DUB system replaces SRAM's previous GXP and BB30 crank and bottom bracket systems to provide improved durability, better compatibility and a stiffer, stronger and lighter product. DUB cranks can be used with any existing bottom bracket standard when used with the appropriate DUB bottom bracket. Performance benefits aside, it also means your crank is future proofed in case you happen to swap your frame. SRAM's X-Sync 2 chainrings set the standard when the design was first released alongside the XX1 and X01 Eagle drivetrains and the NX Eagle DUB crankset uses a more durable steel version that uses the same unique hooked tooth profile that tenaciously holds the chain in place as well as improving durability of the chainring and chain.The NX Eagle Rear Derailleur features SRAM's X-Actuation technology which has been developed specifically for SRAM 1x drivetrains to ensure that shifting remains sharp, smooth and consistent across the entire cassette. The NX Eagle Trigger shifter uses the same ergonomic design as SRAM's higher end shifters and carries over many of their features, including Zero Loss to provide instant and responsive shifting as well as being MatchMaker X compatible, so it can be easily synced with SRAM brake levers to leave a clean, uncluttered cockpit. The NX Eagle Trigger Shifter also features a unique cover for the gear cable, so you can easily change the gear cable without having to dismantle the shifter cover, making cable changes a breeze. Using the same design and manufacturing techniques as SRAM's higher end Eagle chains, the NX Eagle Chain uses a highly durable solid pin construction and clever link profile to provide precise and slick shifting under even the harshest conditions. The unique profile also provides significantly reduced wear on Eagle cassettes and chainrings, massively extending the usable life of your drivetrain. SRAM's PowerLock quick links also make installation and removal a breeze. SRAM's NX Eagle DUB Groupset may cost a fraction of their higher end groupsets, but the performance is still exemplary and it packs an almighty punch without putting too big of a dent in your wallet. Wide range 1x drivetrains have never been so attainable thanks to NX Eagle.
Five Ten Women's Brand Of The Brave MTB Baggy ShortsThe Five Ten Women's Brand Of The Brave MTB Baggy Shorts give you lightweight but durable comfort for those summer days when you're crushing mountain bike trails. With their 4-way stretch Primegreen recycled materials, the Women's Brand Of The Brave MTB Baggy Shorts give you a superbly flexible mountain-bike-ready fit with excellent eco-credentials. On the bike, you'll enjoy easy movement as you get up to speed and they're just as comfortable if you've got some downtime off the bike. The Brand of the Brave silicone print keeps your shorts in place and if you need even more security, belt loops let you cinch down a belt. Small zipped pockets keep little stuff accessible and close to hand too. Primegreen ProductsTurning away from reliance on virgin polyester, Primegreen products take a different approach. Recycled ingredients are used to create high-performance fabrics that meet the needs of sportswear while reducing the impact on the environment in their production. A more sustainable choice for athletes. Features:Materials: 90% Recycled Polyester, 10% Elastane4-way stretch woven fabricPrimegreen recycled fabricsBrand of the Brave silicone print on the inner waistbandFront fly with snap closureBelt loopsTwo side zip pocketsBuy Five Ten Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
The frameless Stealth offers a huge range of vision and maximum coverage. The sleek design works great for all types of riding, and really excels on the road where the huge vented shield lens comes into its ownFeatures: Polycarbonate Lenses: Optics from Madison meets the highest standard for eyewear; ISO 12312. The interchangeable polycarbonate lenses are both impact and scratch-resistant. The lenses offer both supreme optical clarity and UV-A and UV-B protection, Multi-Purpose: Both versatile and stylish, Madison Optics maintain their good looks on the road or trails, TR-90 Frames: TR-90 plastics are lightweight, flexible and durable. TR-90 plastic memory allows them to flex and return to their original shape without breaking or bending, Secure Fit: Our frames work seamlessly with your helmet with non-slip rubber tips for maximum comfort and security. The flexible nose-piece allows you to dial in the perfect fit, adjusting for extra venting if desired, Soft Pouch: We have included a soft pouch for lens cleaning and protection on the move. An optional RX insert is available for prescription lenses, Size Spec: Lens Width: 132mm, Lens Height: 53mm, Frame Width: 145mm, Bridge Height: 14mm, Arm Length: 118mm, Limited Lifetime Warranty: At Madison, we pride ourselves on offering an excellent product with aftercare to match. That's why this product is covered by our Limited Lifetime Warranty.