Nukeproof Reactor 290 Carbon FrameThis mountain bike (MTB) frame features an ultra-strong T700/800 monocoque carbon fibre build for excellent stiffness and durability, without weighing down your ride with unnecessary excess grams. Nukeproof has also kitted out this model with a Factory Series Fox Float X rear shock, which delivers smooth and consistent rear end suspension performance, as you charge across rock gardens, tree roots and debris. Another highlight is its updated geometry with internal cable routing that allows you to enjoy trail-ready handling and control with a clean, sleek finish. Coming complete with 148x12mm Boost rear hub spacing for increased stiffness and strength, this is an ideal choice of upgrade for completing your full suspension MTB bike build.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Full Suspension Carbon MTB FrameTo optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable GeometryAll Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents.Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension DesignTo ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.Features: Material: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre Use: Mountain Bike (MTB) frame Shock: Fox Float X, Factory Series, Kashima, 3 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.2 spacer fitted Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro bearings Weight: 3.5Kgs/7.7lbs (Medium option)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Troy Lee Designs Sprint Ultra MTB Cycling PantsCreated for those of you who revel in riding mountain bikes fast, the Troy Lee Designs Sprint Ultra MTB Cycling Pants are brilliantly flexible, tough and highly ventilated for awesome levels of performance. With their slim race-focused fit, the Sprint Ultra MTB Cycling Pants are ideal for both racing and riding your mountain bike at speed. The TLD Ultra-Tech fabric is durable while also being brilliantly flexible. Stretch fabrics across the thighs and back offer unlimited mobility when pedalling and navigating trail features. Mesh calf panels allow easy movement too while also giving a boost to breathability. The Sprint Ultras are able to take on the hard knocks of riding at your limits but also letting you move, pedal and manoeuvre on your bike with no feeling of being restricted.Not just flexible, they're tough too, with a slim fitting lower leg to prevent chain snags, they also feature a Cowhide leather insert that prevents the chain from causing abrasions. When you're at full speed you don't want to be feeling your trousers slipping. The Ultra pants prevent this scenario via the easy to use waist adjusters, giving you easy control of the fit and locking them in space. Riding hard will generate heat, but thanks to the copious ventilation, you'll enjoy both cooling airflow and excellent breathability. TLD Race-Ready Precision FitThe Precision Fit is the premium fit for dedicated mountain bike racers. A form-fitting leg and articulated cut ensure you slice through the air easily, getting up to speed with minimal effort. The minimal construction keeps bulk low and strategic stretch panels allow for easy manoeuvrability on the bike too. Nothing will slow you down as you give it your best towards the finish line.Features:Materials: 91% Polyester, 9% ElastaneTLD Ultra Tech fabricCowhide leather for chain abrasionDurable stretch fabric across the quads and around the rear of the pantsRear mesh panels along the calves improve range of motion while increasing ventilationSelf-fabric waist adjuster"Troy Lee Designs" heat transfer on legs and back of the waistbandTapered lower leg design keeps pant away from chain/seat staysRace fit engineered to accommodate base layer protection while maintaining maximum freedom of movement and pedallingFabric is certified Bluesign approvedBuy Troy Lee Designs Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
iXS Carve AW All Weather PantsThe iXS Carve AW All Weather Pants are ready to hit wet and wild mountain bike trails. Waterproof construction and trail-ready fit ensure you're ready for anything that comes your way. Rain. Mud. Fun. Mountain biking in the wet can be full of thrills and spills, testing skills and grip to the limit. And when skies burst with rain, the Carve AW All Weather Pant come into their own. A waterproof rating of 10,000mm ensures that both drizzle and downpours are dealt with, keeping wet weather out for prolonged periods of riding. The fabric is also quick to dry, perfect for when the weather can't decide between staying wet or dry.For comfortable mountain biking, it's not just about the waterproof protection either. Ripping down slippery trails and pedalling up stiff climbs will soon see you building up a sweat. However, with a 10K breathability rating, moisture has an easy escape route, leaving you drier and more comfortable on the inside.Muddy trails also demand quick reactions and easy movement. And the Carve AW pants won't disappoint. The combination of 4-way stretch and an MTB rider-focused fit enables you to move, manoeuvre and pedal your bike unhindered. An internal silicone gripper and waist adjusters also keep your trousers locked in place no matter how riotous your riding.Features:Materials: 92% Polyester, 8% ElastaneX-stretch, multi-directional stretch (4-way) materialWaterproof & breathable (WP 10K / MVP 10K)Quick-wicking, fast-dryingInternal waist adjusterSilicone anti-slip waist print2 zippered hand pockets3D Mountain bike fitRecycled fibresBuy iXS Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:700C Front Trekking Wheel ,Alloy Hub ,Mach1 240 Rim black ,36H Black (QR) hub ,Black spokes.
Altura Icon Bib ShortsWith their mix of technical fabrics, Italian-made seat pad and tailored fit, the Altura Icon Bib Shorts deliver all the pedalling comfort you could ever need. And all without costing a fortune. Made from a high-stretch fabric, the Icon Bib Short fit just right, offering light muscle compression so you feel support as you pedal. It's quick to deal with moisture too, wicking it off the skin so you never feel too sweaty and uncomfortable, even during harder efforts. You'll also feel fresher thanks to the use of Italian Miti carbon fabric. This helps draw toxins away from the skin and reduces bacteria build-up, both boosting comfort. To the upper body, the soft-touch elastic bib straps hold everything in place but do so without too much pressure. Altura have also applied reflective details to keep you more visible as your rides stretch into the fading light of a summer evening. Elastic Interface Icon Seat PadThe Altura Icon Seat Pad by Elastic Interface is made in Italy to exacting standards, delivering comfort and support for rides of up to 6 hours. Uniquely, the pad is tailored to rider size and weight. On shorts of small, medium and large sizes, 11mm thick, 80kgm3 foam provides long-ride support. On the larger XL and XXL sizes, extra support is offered by a higher density 120kgm3 foam, still in 11mm thickness to minimise bulk. Quick-wicking and breathable materials plus sweat absorption channels ensure sweat is dealt with quickly before discomfort sets in. And with an anatomic design, this pad offers excellent comfort and flexibility when you're pedalling. Features:Materials: 80% Polyamide, 202% ElastaneMesh: 90% Polyester, 10% ElastaneHigh wicking stretch fabricExclusively developed Icon pad developed with Elastic InterfaceItalian carbon fabric back panel to reduce bacteria and sustain freshnessSoft elasticated bib strapsHighly wicking mesh back panelReflective print detailFitted cutBuy Altura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
The X-Tools Switchit Keys improve on the modern multitool design. It is a convenient and extremely packable tool, which is perfectly sized to pop into your trail bag or stuff in your jersey pocket. Multi-Function Switch ToolStorage Pouch IncludedDouble-End Hex Bits: 2.5, 3, 4, 5, 6mmTorx Heads: T25, T30Screwdriver: ST5 Flat HeadChain Breaker Compatibility: 6 to 11-SpeedIt features a 2.5, 3, 4, 5 & 6mm Allen key head plus T25 and T30 Torx tool, a ST5 flat head screwdriver and a multi-speed chain breaker; it provides virtually everything needed for a Trail side or roadside mechanical. For optimum convenience the tool bits slide into the double-ended tool so you always have them with you. The tool comes supplied in a low-profile, easy to store, durable pack and provides all that is needed to efficiently maintain your bike on the go, when many miles from home.
The Nano Flex Xtra Dry fabric used for the Nanoflex Pro 2 Bib Tights is an advancement of the original Nano Flex, with a tighter-knit double-layer construction for warmth, and the water repellency treatment is improved to offer even more protection in the rain. At the same time, you still have the benefits of incredible breathability and stretch that make this tight so impressively comfortable when riding. This is a tight you'll enjoy wearing whether it's dry or wet. It's not just about the fabric though. Castelli gives the bibtights their Progetto X² Air seat pad, designed with multi-density foam in variable thicknesses and without seams, it will give you support where you need it most. Extra protection is added to the inner leg of the tights, helping to resist splashes and road spray, while large reflective panels increase your after-dark visibility. The tight is also constructed with the bare minimum of seaming, which helps keep the rain out and also makes it even more comfortable. Utilising the best of modern fabric technology paired with Castelli's expertise in fit and comfort, this tight is an impressive all-around winter tight you'll love to wear.
When Castelli engineered the first aero jersey for road racing back in 2006, everyone thought we were crazy. Back then, aero was only for TTs. Performance clothing meant moisture management. And you could win the Tour de France with a baggy jersey that was little more than a polyester T-shirt. Even our aerodynamic consultants expected limited gains, so we named the jersey Split Second, though, like now, we thought even small gains were worth pursuing. In the end the gains were pretty substantial, and we completely revolutionized the look of the pro peloton. We're now on the sixth major revision of our aero jersey. Each generation has become more aero and better fitting. The Aero Race 6.0 benefits heavily from CFD analysis of wake flow in the riding position for fabric and seam placement. It also benefits from pro riders' feedback, as we've worked to make the jersey comfortable for their long hours of training and then racing in every possible weather condition. CFD-based fabric placement and seam construction Engineered for aero efficiency at 30 to 55 km/h Airflow shoulder construction Velocity Rev2 fabric on front and sleeve 3D mesh back for breathability Elbow-length stretch sleeves with raw-cut edge YKK® Vislon® zipper Drop tail allows perfect pocket placement while keeping jersey fitting well at waist 18-35°C / 64-95°F Weight: 109 g
PowerPod V5 has new sensors, more accurate data recording, and simpler setup A new 24 bit wind sensor, designed and manufactured exclusively for Velocomp, provides better and higher resolution wind measurements A new 24 bit barometric pressure sensor provides more accurate elevation measurement New Firmware 9 (factory installed) uses 24 bit data to deliver better power measurement accuracy New Velocomp app for iOS/Android lets you set up as many as four bikes from your smartphone, without using Isaac software Velocomp app also includes a bike computer screen displaying instantaneous and average power, speed, calories, distance, cadence, and also a graphical display of your zone % FTP All new PowerPod V5 features add to the already-impressive list of PowerPod features and benefits. One Device. All The Data. High accuracy, +/- 2%, both leg measurement Works with any road, mountain, time trial, gravel, and cross bike Other bikes too: tandem, recumbent, folding, you name it! No swapping bike components Box to bike setup in 10 minutes ANT+™ compatibility Transmits power data to many popular iOS/Android cycling apps Records your ride data for analysis in Velocomp Isaac software Simple To Set Up With PowerPod V5 you don't swap-out wheels, cranks or pedals. Installation is incredibly easy: Attach the PowerPod mount to your handlebars (Or with the optional mount, directly beneath your Garmin or Wahoo!) Pair PowerPod V5 to your bike computer's ANT+™ speed or speed/cadence sensor Pair your bike computer or smartphone app to PowerPod V5 Customize your settings with the Velocomp app for iOS/Android Perform a one-time, short out-and-back calibration ride Then, just ride!
Built from a 3D-forged, 6061 alloy, this excellent fork and bar connector features a flatter top section to add another level of aerodynamics to your fast-paced cockpit. CrMo bolts ensure a firm hold to your bar, while a tight grasp at the steerer end makes for a sturdy and strong engagement when you are tearing across the tarmac. Available in a range of sizes and heights, this brilliant stem is an excellent choice for any level of road rider.
Castelli Endurance 3 Cycling Bib ShortsWith the top-end Progetto X2 Air seat pad at their core and muscle-supporting fabric, the Castelli Endurance 3 Cycling Bib Shorts deliver outstanding comfort for your longest bike rides. When it comes to on-the-saddle support and long-ride comfort, it doesn't get much better than the Endurance 3 Cycling Bib Shorts. Using their Endurance Evolution fabric, you'll find your hard-working muscles are gently compressed and supported, helping fight off fatigue for longer. It's also excellent at dealing with perspiration, preventing you from feeling cool and clammy from sweat build-up. Castelli's GIRO³ leg grippers prevent the shorts from riding up and give a smooth and streamlined finish. The fit of the Endurance 3 shorts is also exemplary. The designers at Castelli have placed the seams precisely to give a perfect fit around the hips and waist. At the same time, the panels are tailored to allow easy movement, letting you pedal smoothly and manoeuvre abut your bike with ease. Progetto X2 Air Seat PadInside the shorts, you’ll find Castelli’s premier Progetto X2 Air seat pad. This exceptional seat pad has an incredibly soft and seamless upper face material, delivering superb comfort. The next layer, Castelli’s infinitely variable thickness padding, imparts just the right level of support where you need it, thicker under the sit bones and thinner on the sides and under the perineum. The results are intense comfort with reduced bulk.Features:Materials: 71% Polyamide, 29% ElastaneEndurance Evolution fabric provides optimum muscle support and feels drier in nearly all conditionsAnatomic cut for perfect on-bike fitMesh bib straps and back to keep you coolerProgetto X2 Air Seamless seat pad for even greater comfort and improved airflowGIRO3 leg grippers lie flatSuggested temperature range: 18 to 38 degrees CBuy Castelli Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
It might look normal from the outside, but the engineering inside this incredible new chain design that makes possible a gear range previously found only in 2-chainring drivetrains. And it’s also the biggest contributor to the Eagle™ drivetrain’s ultra-smooth, precise, durable and quiet performance. The Eagle™ chain’s links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear on chainrings and cassette cogs. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. HARD CHROME™ technology extends the chain’s optimal performance life, and a Titanium Nitride coating on the Gold and Black models decreases corrosion and further reduces friction. Groundbreaking new chain design and technology, The Eagle™ chain has been completely re-engineered, and is produced with new manufacturing technology, All-new Eagle™ PowerLock® chain connector with FLOWLINK™ technology gives better chain-guiding and increased longevity, The XX1 Eagle™ chain is the quietest, strongest and most wear-resistant chain in the world, Unique features and design also give significantly improved wear resistance on Eagle™ cassettes and rings.