The Shimano BR-MT200 disc brake kit is a low-priced brake system without groupset integration. With its versatile design, it is suitable for various bikes in MTB, City & Touring etc. The performance of the 2-piston brake calipers is suited to beginners and performs reliably without fuss. Thanks to One Way Bleeding technology, bleeding and general maintenance is not a problem. The BL-MT200 brake levers have a grip that is easy to grasp, even for smaller hands.Great value fully bled hydraulic disc brake with easily adaptable post-style calliperFully bled lever and disconnected, caliper comes without adapters or rotors giving you the freedom to customise to suite your bikeCan be used with the revolutionary Centre Lock rotor system which fits easily to Centre Lock compatible hubs; alternatively, conventional 6-bolt rotors can be used all in a choice of 160 mm, 180 mmMineral oil brake fluid is non-corrosive and less hazardous than conventional hydraulic brake fluidFor use with resin pads onlyBrakes are set up UK-style with front brake on the right, rear on the left
If you're determined to maintain and build your cycling fitness over winter, then the Women's Progel Plus Thermal Tights will keep you cosy and warm as you build up your training miles. As temperatures plunge towards freezing, the premium 260gsm brushed back fabric does a brilliant job of capturing and holding on to your generated body heat. Meanwhile, to the outside, a durable water-repellant coating keeps you drier when you're caught in a sharp shower or taking on dank and drizzly days of training. To the waist, the improved soft-feel waistband maintains a firm fit but without too much pressure over the tummy. This allows you to breathe easy during your harder training efforts and allows easy movement too. Women's Berenis™ Progel Plus Seat Pad Using an Altura-exclusive moulded design, the Progel Plus pad is rated for comfort on rides of four hours and beyond. Dual-density foam provides a balance of support and shock absorption while the rooted gel is also utilised to ensure the pad retains its anatomical shape ride after ride.
Deda's Cronoaero bars are available in three shapes and will help you to find optimum aerodynamics, power output and lasting comfort when in your preferred riding position. Please Note: All options of these bars are only suitable for bar end (22mm internal) type brake levers. This due to aero shaping on the horizontal section next to stem clamp area. "Standard" flat bar levers cannot fit on to these bars.
Soft, stretchy and supportive. These functional leggings are perfect for any sort of yoga workout. Fabric: 82% Polyester 18% Elastane
Castelli Pro Issue Sleeveless Base LayerCastelli's 3D mesh fabric creates dead air space next to your skin, while the polyester capillary action moves sweat away.Features: 100% polyester 3D mesh fabric Reduced seaming at shoulders for extra comfort Wider collar to fit under aero jerseys Flat waist hem to lie flat in shorts 15°-25°C/59°-77°F Weight: 44g (Large)Buy Castelli Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Avid G3 Clean Sweep RotorVarying cutout sizes and shapes vastly improve heat dissipation, which in turn greatly reduces heating of the brake fluid creating a consistent braking feel. It also sheds approximately 10g over the G2 Clean Sweep rotor design. Features: Compatible with: Avid Elixir disc brakes. Mount: 6 bolt.Buy Avid Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Don't stress about old, stinky pads any longer. Shadow now offer replacement breathable foam pads to fit their Classic helmets. Coming with 8mm or 5mm pad sets to ensure a custom fit for each rider's personal needs. These replaceable pad sets will help you get the most value out of your Shadow Classic Helmet.
dhb Trail Hooded Softshell JacketStay out when the weather turns with the dhb Trail Hooded Softshell Jacket. Insulating, water-resistant and windproof, this versatile jacket is a must-have for any trail rider.For the adventure, this thermal jacket is a staple for any off-road rider’s wardrobe – whether you’re embarking on an epic day out or a social spin with friends.The windproof outer layer cuts out the wind chill while still being breathable and a thermal grid fleece backing will provide lightweight warmth. Finished with a DWR treatment, this jacket will keep you dry in showers and the adjustable hood has a stiffened peak to fit over your helmet for that extra protection.The dhb Trail Hooded Softshell Jacket is semi-tailored for on and off the bike comfort and functionality. Along with the fabric’s natural stretch, dhb have designed this jacket to deliver excellent freedom of movement without being so loose it slows you down or gets in the way.The slightly dropped hem at the back offers some added protection and is adjustable to give you a great fit. The cuffs are shaped for extra coverage, and super-comfortable internal cuff gaiters trap in warmth.The jacket is finished with two spacious mesh-lined pockets, which add additional ventilation when the heat is on. The pockets sit high to ensure they are accessible above a hydration pack hip belt. For visibility in low light conditions, there are additional reflective trims so you can focus on the trail ahead.dhb’s Trail collectionThe dhb Trail collection is for everyone, on every bike, at every level. For anyone who wants to be on two wheels and discover fun on a bike, exploring hidden gems and trails on their doorstep. Trail is for all the shortcuts, wrong turns, punctures and pit stops. It’s for the adventure!Features:Materials: 81% Polyester, 19% PolyurethaneThermal softshell jacket for cold winter conditionsBreathable, windproof membrane with fleece innerBreathability rating 10,000g/m/24hrDWR treatment and waterproof membraneWaterproof rating 10,000mmAdjustable hood with a stiffened peakWaterproof YKK Aquaguard™ front zipperTwo spacious ventilated pockets with glove-friendly zip pullersShaped cuffs, internal cuff gaiters, adjustable hemReflective trims for added visibility in low light conditionsBuy dhb Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Complete solution - use the 4' cable to secure front wheel or accessories 13mm hardened Performance steel shackle resists cutting and leverage attacks New patent pending hardened double deadbolt design gives additional protection against twist attacks High security disc-style cylinder is pick and drill resistant Anti-rattle bumpers reduce noise during transport New dust cover Includes Transit FlexFrame-U transportation system which allows for versatile carrying Protective vinyl coating 2 stainless steel keys Key Safe Program Rated 6/10 on Kryptonite’s security scale Optional ATPO - £1000 Product dimensions: 3.25” x 7” (8.2cm x 17.8cm) Product weight: 2.45 lbs (1.11 kgs) Sold Secure Bicycle Gold certified
The ever popular Fatbar Lite has been given some structural tweaks to bring it bang up to date with the increased width at 760mm.With efficient use of high grade 7050 T6 aluminium, Renthal have kept the same market leading weight of 270g. This is achieved with efficient use of material, removing any excess to reduce weight, whilst retaining the strength, durability and flex characteristics as the original Fatbar Lite. The Fatbar Lite features a hard anodised surface finish and, adding to the iconic AluGold colour, there s now a black option. This incredibly durable surface treatment ensures the handlebar keeps looking fresh, not matter what you or the trail may put it through.Second version of the Fatbar Lite31.8mm handlebar clampHigh grade 7050 T6 aluminium constructionWidth: 760mmBacksweep: 7 DegreeUpsweep: 5 DegreeWeight: 270g
Nukeproof Reactor 275 Factory Carbon Bike (XT - 2022)Whether you’re attacking the climbs, blasting down descents or weaving through trees, the Reactor 275 Factory Carbon will ensure you’ll dominate it all. In addition to its advanced unidirectional (UD) carbon frame, it has impact-swallowing Fox Float Factory suspension plus a slick shifting Shimano XT 12-Speed groupset.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Frame Construction:To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable Geometry:All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents.Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension Design:To ensure the bike could climb as well as it descends, Nukeproof designed the 4-bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.Features: Frame: Nukeproof Reactor 275 Carbon, 140mm Travel, UD woven Carbon Fibre frame, internal cable routing, ISCG 05 mounts, Enduro bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection Fork: Fox 36 Float, Factory Series, Kashima, Grip 2 Damper, 160mm, 44mm Offset, BOOST, Kabolt-X, Orange Shock: Fox Float X, Factory Series, Kashima, 2 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.3 spacer fitted Front Wheel: DT Swiss XM1700 SPLINE 30,27.5", 6 Bolt, 110x15mm Rear Wheel: DT Swiss XM1700 SPLINE 30, 27.5", 6 Bolt, Shimano Microspline Driver, 148x12mm Tyres: Front: Maxxis Assegai 27.5”x2.5 WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 27.5”x2.4 WT 3C MaxxTerra/EXO+/TR Crankset: Shimano XT M8100 12-Speed, Hollowtech 2, 170mm, 32T, 52mm Chainline Shifter: Shimano XT M8100-R, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano XT M8100, SGS 12-Speed, Shadow Plus Chain: Shimano XT M8100 HG 12-speed Inc Quicklink Cassette: Shimano XT M8100-12, 12-Speed (HYPERGLIDE+), 10-51T Brakes: Shimano XT M8120, 4 Pot Brake, Metallic Pads Front Rotor: Brakco, 203mm Rear Rotor: Brakco, 180mm Handlebars: Nukeproof Horizon V2 25mm Rise, Width - S780mm, M780mm, L800mm, XL800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Bikeyoke Divine Stealth with Brand-X Remote lever, S:125mm drop; M:160mm drop; L/XL:185mm drop Headset: Nukeproof, 44-56 IITS Grips: Nukeproof Sam Hill Signature Weight: 14kg (Medium, Tubeless)Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table above for accurate information.Key Specifications: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 160mm Axle to Crown: 549mm Fork Offset: 46mm Rear Travel: 140mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x55mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: S/M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CSTechnologies: Flip Chip Adjustable Suspension Geometry: All models of the Reactor feature a "flip-chip", so that the bike geometry can be easily adjusted from "Trail" to "Rail" mode without having to custom tune your suspension setup. The Trail setting is best suited for pumping and carving your rhythm and style into the mountainside and still caters for rides who love the climb as much as the descent. On the other hand, the Rail setting turns the Reactor into an adrenaline-fuelled gravity tamer. Dropping the bottom bracket height by 6mm and slackening the head angle by half a degree, these changes give this Reactor greater stability and control when the trail leans downhill towards vertical Nukeproof 4-Bar Horst Linkage Suspension Design: Ensuring the bike can climb as well as it descends, Nukeproof focussed on fine-tuning their 4-Bar Horst linkage suspension setup to give higher levels of anti-squat performance when higher up the cassette in the climbing gears, but also to deliver greater trail-gobbling performance when you drop down the cassette and begin descending the mountain. This means that the bike behaves itself on the climbs and grips with unprecedented traction and efficiency when making your way back towards sea-level. When you get it up to speed and drop a few gears to carry momentum, this bike turns into a trail hooligan and helps you carve the trail with style. The combination of low anti-squat and progressive suspension-rate give it the ultimate in small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. With balanced anti-rise suspension performance, the Reactor provides some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure stability and traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any rideEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for kids’ bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is kids’ bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Buy Nukeproof Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
MET Echo Helmet (MIPS)Whether you're a seasoned veteran or just discovering the joys of mountain biking, the MET Echo Helmet (MIPS) is packed with protection technology to keep you safe should you take a fall. An entry-level essential for the new and experienced trail enthusiast alike, the MET Echo Cycle Helmet (MIPS) features the same technology and safety as helmets higher up in its range, which includes the MIPS-C2® brain protection system. This allows the cycle helmet to slide relative to the head in the event of a crash, redirecting any damaging rotational motion.The Echo also comes with an increased coverage at the back of the head, an area in particular need of protection, alongside a removable visor and a reflective rear sticker that ensures visibility in low lighting.MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.Features:In-mould polycarbonate shell with EPS linerMIPS-C2®Safe-T Mid Fit SystemHand washable comfort padsAdjustable cam dividerRemovable visorReflective rear stickerWeight: 305g (S/M), 330g (M/L)CE - AS/NZS certificationShop all MIPS helmets - Click hereBuy MET Helmets from Chain Reaction Cycles, The World's Largest Online Bike Store.