Ready, set, send. This next generation of our award-winning Smith Forefront mountain bike helmet has your back (and front, and sides) thanks to MIPS® and complete Koroyd® impact protection. Designed to work with goggles or sunglasses, the helmet vents warm air, eliminating foggy lenses so you'll feel confident even if your line of sight is less than ideal. And when your palms start to sweat right before you drop in, you'll stay cool thanks to a full 20 vents that keep the air flowing. The visor adjusts for easy goggle storage between laps, and you can slide your glasses for secure storage on the front or back. Protection Complete Koroyd® coverage for lightweight, energy-absorbing and ventilated impact protection MIPS® Brain Protection System reduces rotational forces caused by angled impacts to the head Integrated skeletal structure creates a roll cage for added strength and impact protection CPSC and CE EN 1078 certified Fit / Integration Designed for ultimate integration with Smith performance eyewear and goggles for maximum comfort, venting and storage convenience AirEvac™ ventilation system integrates with Smith goggles and eyewear for fog-free lenses VaporFit™ dial adjustment system offers 270-degree fit adjustment with the turn of a dial Features 2 fixed vents for consistent airflow Three-position adjustable visor XT2® antimicrobial lining offers sweat-activated odor control Lightweight, low-bulk single-layer webbing Front and rear eyewear storage channels
Designed with graduated compression, the Zone3 RX3 Medical Grade Compression Shorts increase blood flow which reduces lactic acid build up so there is less risk of injury and speeds up times are accelerated. Carefully supporting the muscles throughout exercise, these compression shorts work to bring the best out of your performance. A combination of X-PWR and Revolution Energy fabric from Italy is used to support the hip and knee whilst increasing blood flow to the hamstrings, quads and glutes. Perfect for training, racing or post-workout recovery. The fabrics provide a firm yet soft fit and actively wick away sweat from your skin to regulate body temperature and keep you dry, making them perfect to wear under your normal clothes as well as during exercise. Comfort is maximised with a 4.5cm waistband with drawstring cord and flatlock stitching throughout the garment. Flatlock stitching is also used throughout the garment for comfort and durability. Each pair has two storage options, firstly there is a heat taped zipped pocket on the upper back for nutrition or music devices storage and there is also a hidden pocket inside the front waistband for smaller items.
The 4Forty From Bell is built to withstand the rigors of a trail-riding life; with generous ventilation, the comfort of Float Fit and built-in Sweat Guide, extended rear coverage, a full hard shell and an adjustable visor. Boasting the comfort, protection and broadly capable features of helmets costing twice as much, the 4Forty is a bantamweight, all-conditions, all-kinds-of-trail champion packing a heavyweight value.Fusion In-Mold polycarbonate shell - A process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmet.Float Fit - A minimalist, lightweight fit system with an easy-to-turn rubber over moulded dial for adjustments.15 ventsGoggle Guide adjustable visor accommodates both goggles and glassesNo-Twist Tri-Glides: Quick-adjust fasteners that help keep straps flat and properly positionedSweat Guide pad design pulls moisture away from the brow pad and away from eyewearCE EN1078 certifiedConstruction: Fusion In-Mold polycarbonate shell - A process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmet.Fit System: Float Fit - A minimalist, lightweight fit system with an easy-to-turn rubber over moulded dial for adjustments. No-Twist Tri-Glides: Quick-adjust fasteners that help keep straps flat and properly positionedWeight: 15 Vents
KMC Z1EHX EPT Single Speed ChainThis high-quality chain is specifically designed for E-bike use as it offers smooth and dependable performance. It features 128 links which features a stunning EcoProTeQ coating and an anti-rust finish, so you can enjoy its amazing torque power in all weather conditions. This is a perfect choice of upgrade for riders who want a component that you can rely on as you cruise around the city streets and further afield.Features: Use: E-Bike Speed: Single speed Dimensions: 1/2x3/32" Pin length: 7.8mm Links: 128 Coating: EcoProTeQ Buy KMC Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
VeloToze Silicone Shoe CoversKeeping your feet warm and dry when cycling through cold, wet and wild weather, the sleek design of the VeloToze Silicone Shoe Covers does away with zippers to create an incredibly aero fit, while poppers below make it easier to get them on.With their high-stretch silicone construction and zipperless design, the Silicone Shoe Covers offer outstanding protection from the rain. This also gives them their smooth, aerodynamic fit, ideal for racing and training. Not only waterproof, but they're also outstanding at keeping out wind too, making them just as good to wear in the dry as in the wet. The high degree of flexibility also ensures your pedal stroke is unhindered. Pro-TipIf water is entering through vent holes on the bottom of your shoe, remove the insole from the shoe and place tape or waterproof material over vent holes during the rainy season. Fitting Instructions1: Put on your socks2: Pull the shoe cover/overshoes on over your socks first3: Ensure closure at bottom of the shoe cover is open4: Put on your cycling shoes5: Stretch the cover over your shoes and close snap underneath6: Adjust around ankle, cleats and heel pad. Ensure no part of the shoe cover is over cleats or heel pad.Care InstructionsHand wash with cold water, air dry.Do not bleach. Do not iron.Store out of direct sunlight.FeaturesMaterials: 100% Silicone rubberWaterproof: silicone keeps your feet warm and dryWindproof: windproof materials keep your feet warm on a cold morning or winter ridesEasy to put on: snaps on below cycling shoeFlexible: silicone stretches and flexes with you as you rideDesigned for -5 C in dry, sunny weather to 15 C in wet, rainy weatherSold as a pairBuy VeloToze from Chain Reaction Cycles, the World's Largest Online Bike Store.
Drew Peak Crew SweatshirtPerfect for slipping on pre or post workout or on relaxing weekends, The North Face's Drew Peak Crew Sweatshirt is an essential casual piece for anyone who enjoys an active lifestyle.An all-time The North Face favourite, the Drew Peak Crew Sweatshirt has been made with soft cotton jersey and a terry fleece interior and boasts a classic crew-neck design with an embroidered logo at the front and ribbed trims. Plus, the cotton used to make the men’s sweater comes from the Better Cotton Initiative.About the Better Cotton InitiativeThe Better Cotton Initiative (BCI) helps to make global cotton production better for the people who produce it, better for the environment it grows in and better for the sector's future, by developing Better Cotton as a sustainable mainstream commodity.Features:Crew neckLong sleevesEmbroidered chest logoRibbed trimsMade with cotton from the Better Cotton Initiative100% CottonBuy The North Face clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
SE Bikes Big Flyer 29 BMX BikeStylish, agile and fast, the SE Bikes Big Flyer 29 rolls upon 29” wheels and provides all the pace, stability and head-turning style for riding anywhere. Engineered around a durable and lightweight 6061 alloy frame, complete with Floval tubing and Chromoly (CrMo) SE Landing Gear forks, this bike is perfect for jumps, trails and street riding. Plus, it's equipped with rear pegs, double-wall rims, a Big Flyer saddle and 3-piece tubular CrMo cranks - this BMX is ideal for riding anywhere.Large 29" Wheels, MID Bottom Bracket and Rear PegsThe 29" Big Flyer continues to take the crown as the king of the streets. This year's bike is tougher than ever with the addition of an internal headset, mid-bottom bracket and rear stunt pegs.Features: Frame: 6061 Aluminium Floval Tubing, Internal Head Tube, 68mm Wide Mid Bottom Bracket, Wide Rear Stays, SE Wave Dropouts Fork: Landing Gear, Chromoly Headset: FSA No.10 Internal, 1-1/8" Stem: SE BIKELIFE Alloy Top-Load, 48mm Reach Handlebar: Big Honkin' Cruiser Bar, 30" x 6", 10° Backsweep, 1° Upsweep Grips: SE BIKELIFE Grips w/ SE Rubber End Plugs Brakeset: Promax V-Brake Brake Levers: Promax 2-finger alloy Crankset: SE 3-pc Cr-Mo, 175mm, Sealed Bearing Mid Bottom Bracket, 150mm Spindle Length, 19mm Spindle Diameter Sprocket: 36T SE Sprocket Bottom Bracket: 68mm Wide Mid Bottom Bracket Pedals: SE Nylon Fiber Platform Chain: KMC S1 Wheelset: SE Racing Alloy 36H Flp-Flop Hubs, Sealed Rear, w/ Double-wall Rims Freewheel: 16T Freewheel Tyres: SE Bozack, Street Proven Multi Purpose Compound, Wrap Around Urban Tread Pattern, Grooved SE Wing Logo, 29" x 2.4" Front & Rear Seat: SE Big Flyer Seat w/ Super Grippy Top Cover Seatpost: Race Rocker Micro-Adjust Alloy, 27.2mm Seat Clamp: Alloy, 31.8mm Inner Diameter Accessories: SE BIKELIFE Wheelie Pegs, Alloy Valve Caps Weight: 32 lbs / 14.51kgPlease note: this bike is for use on BMX tracks and skate parks. In many countries, it is illegal to use this bike on public roads without using the two independent braking systems provided (a front and rear brake).Buy SE Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Tracer Pro 2Bliss Ready tyre has a fast tread for all-around cyclocross riding and racing. This tread covers all courses, with centre knobs to give ample traction and siped shoulder knobs that adapt to hard and loose ground. The Tracer is lightweight, making it easy to accelerate. And with 2Bliss Ready design, you'll be able to run lower pressures for increased comfort, traction, and control through slippery corners.Key Features:Casing: 60 TPI,Bead: Foldable,Butyl wrapped bead = 2Bliss Ready,Compound: GRIPTON,700 x 33mm; psi 45-90; approximate weight 365g,
Stay Strong's range of lightweight, premium quality BMX gloves include a clarino fabric palm to provide durability and ventilation, a soft lycra back for improved comfort, stretch and a closer fit, Silicone print fingers to help ensure maximum grip during
Sidi Eagle 10 MTB ShoesThe Sidi Eagle 10 MTB Shoes deliver premium performance for mountain biking and off-road riding, whether that's between the tape at a race or on a big-mountain adventure. With their stiff sole unit and twin dial adjustment, comfort and direct power transfer are a given but you'll also enjoy legendary Sidi durability. A snug and comfortable fit are provided by the technical MicroTech upper. This advanced material is flexible to provide a moulded fit for instant comfort from the box while also being remarkably tough. It's also water repellent, brushing off muddy puddles and damp riding conditions if the weather turns against you. It is also eco-friendly. Meanwhile, to the heel, the reinforced heel cup gives a secure fit for optimal stability when you're driving power through your pedals. This supple upper is closed via the Soft Instep Closure 4 system and Techno 3 dial systems. A wide EVA thermo-formed padded strap spreads pressure evenly across the upper foot, and with adjustment both side, a firm and comfortable fit are easy to tune in. To the midfoot the second Techno 3 dial takes care of securing your foot perfectly in place for outstanding comfort with no fuss. RS17 MTB SoleThe RS17 MTB Sole gives a stiff and stable pedalling platform through which you'll enjoy smooth and effortless power transfer as you speed along the trail. A dialled in amount of flex also make them comfortable over rougher terrain while also making walking easy too. If you are off the bike then the MTB specific tread provides sure-footed traction even on the muddiest of ground. Toe studs can also be added to boost grip and the replaceable toe tread gives the shoes increased lifespan. Cleat GuidanceThese shoes are compatible with MTB pedal systems, which use the 2-bolt cleat standard (SPD standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:Please Note: Sidi recommend purchasing one whole size up from your usual fitSoft Instep Closure 4Tecno 3 dial adjustersRS17 MTB SoleSidi Heel CupReplaceable toe padUpper: Microfibre water-repellent2-bolt cleat compatibleBuy Sidi Shoes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Selle San Marco Shortfit 2.0 Supercomfort Racing SaddleBorn for racing, this road bike saddle features a high-quality microfeel cover, which uses its microfibre material to provide fantastic resistance against abrasion and unpredictable weather conditions. Its special construction also delivers a great touch and feel that's long-lasting, durable and easy to clean. Selle San Marco has also kitted out this model with a carbon reinforced nylon shell that offers increased rigidity without adding any unnecessary excess grams to your road bike. Its high-performance nylon shell is enhanced with carbon fibres that are built with variable thicknesses and reinforced by ribs and bridges for greater ergonomics without affecting weight. Coming complete with Xsilite AiSi304 hollow stainless steel rails, this saddle remains very light, resistant and tough against all weather conditions. Its special production process also guarantees excellent fatigue resistance.Selle San Marco presents Shortfit 2.0: the model marks a new chapter of one of the most successful products of the historical Italian company.The Shortfit model is the most aggressive saddle in the collection. It is distinguished by its short length and maximised central cut-out. The excellent, generous rear support makes this model ideal for those athletes who rotate their pelvis a lot whilst pedalling and as a result, move closer towards the handlebars. Its technical structure makes it particularly suitable for road use.Adapted to the most advanced technologies, the Shortfit 2.0 comes to the market with renewed features but always remains faithful to the tradition of craftsmanship that has always distinguished the brand.Biofoam Plus Padding and Central Cut OutDesigned for comfort, this Supercomfort version features Biofoam Plus. Its biodynamic low-density foam uses a variable thickness structure that follows the movements of the pelvis when pedalling, for guaranteed comfort, low weight, long-lasting resistance and ideal support. Also benefitting from an Open Fit design, this saddle has a central cut out that runs down its centre to relieve any pressure or fatigue from around your sit bones. As a result, the Selle San Marco Shortfit 2.0 Supercomfort Racing Saddle allows you to go the extra mile with increased comfort and support.Features: Cover Material: Microfeel Shell Material: Carbon Fibre reinforced Rails Material: Xsilite, 7mm Padding: Biofoam Plus Use: Road Size: S3 Option: 140x255mm; L3 Option: 155x255mm Technology: Racing Weight: S3 Option: 240g; L3 Option: 245gTechnologies: Microfeel: Microfibre material, abrasion-resistant, weather-resistant, perspirant. Great touch and feel. Long-lasting and durable. Easy to wash & clean. Carbon Fibre Reinforced: High-performance nylon, enhanced with carbon fibres, built with variable thickness, reinforcements by ribs and bridges, which enhance the rigidity with ergonomy and durability characteristics, without affecting weight to the shell. Xsilite Rails: AiSi304 stainless steel hollow rails (outer Ø 7 mm - inner Ø 5 mm). Very Light, resistant, and tough against all weather conditions. A special production process guarantees excellent fatigue resistance. All Racing level saddles have Xsilite rails. Supercomfort: Improved, thicker padding (Biofoam Plus) featuring variable density to better guarantee a comfortable posture while riding. The central opening has been increased to lend maximum relief from perineal pressure while at the same time maintaining a sufficient area of support. Suitable for E-Bikes. Open Fit: A saddle is Open-Fit when it has a small or large hole right through the seat. It is suitable for individuals with a medium to accentuated pelvic tilt.Manufacturer's Part Numbers: SMS291LN001 Black Narrow (S3) SMS291LW001 Black Wide (L3)Buy Selle San Marco Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank 350 Boost Rear WheelThis rear mountain bike wheel is strong, reliable and lightweight. Perfect for the hardest routes on the mountainside, this hard-wearing rear wheel features 12x148mm Boost hub spacing, is tubeless compatible and great for enduro and DH riding. Reliably built for taking on the most exhilarating runs, this rear-wheel comes fitted with a 12x148mm Boost hub which lets you fit plus-sized tyres for the boldest ride possible.Coming tubeless-ready to keep Trail, All Mountain and Enduro riders at their peak, the Spank OOZY 350 Boost Rear Wheel is optimised for rough and ready riding. Constructed using a wide rim profile to take on larger tyres and keeps a strong and sturdy form thanks to 32 straight pull, triple-butted spokes.Made with a variety of technologies to keep you rolling through the harshest conditions, this wheel makes the most of its radial compliant and laterally stiff rims. Plus, its rim features an innovative OohBah inverted wall and a BeadBite Anti-burp rim-hook set-up to maintain the shape and structure of the wheels and air pressure in your tyres.Features: Material: Top-Performance Alloy Use: MTB Inner Width: 30.5mm Outer Width: 35mm Hole Count: 32 Valve: F/V Presta Tubeless: Tubeless equipped (tape and valves included) Technologies: Radial Compliance, Lateral Stiffness, BeadBite, OohBah Inverted Inner Wall Hubs Spacing: 12x148mm BoostCassette Compatibility: Shimano/SRAM 9,10 and 11-Speed mountain bike cassettes (not SRAM XD compatible) Single or Pair: SingleTechnologies: Bead Bite: At an incredible range of pressures, Bead Bite is the solution to keeping your tyres burp free and fixed in place. Bead Bite rim technology enhances tubeless use with tyres of all types and with a greater range of air pressures. Bead Bite rims have 6 rows of tiny ridges that run along the vertical and horizontal faces of the bead seats. These tiny teeth create air seals between the rim and tyre as the bead conforms into them under air pressure. They dramatically increase frictional forces on the tyre bead, reducing the beads' ability to move vertically or horizontally (thus improving tyre stability and reducing burps). The bead literally becomes trapped between the vertical and horizontal ridges, even at very low air pressures. Even in tubed applications, Bead Bite rims tend to allow much lower air pressures with reduced risk of pinch flats. Oohbah: The unique OohBah profile allows Spank to manufacture thinner walled, wider profiled, lighter rims without sacrificing strength or rigidity. Wider rims mean stiffer wheels and more tyre spread, leading to greater traction and improved comfort, and tyre performance. The "wave" shape of the OohBah inner tube adds strength and support to the vertical rim flange walls and prevent buckling. Normal straight or curved tube wells must be much thicker, and by default heavier, to offer the same support.Buy Spank Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.