Shimano Deore M410 Disc Brake (M4100 Lever)The Deore M410 Disc Brake (M4100 Lever) from Shimano is for the avid mountain biker who wants a reliable hydraulic disc brake that delivers ultimate control and safety in all riding conditions.Shimano M4100 Brake LeverThis brake lever is engineered for fast-paced MTB riding, as it gives you exceptional stopping power and control on the toughest of rides. It features a rock-solid alloy construction, which makes it capable of handling all the sudden hits that come with weaving between the trails at speed. Shimano has also equipped this model with an adjustable lever reach, so you can set it up to perfectly match your hand size, personal preferences and the trail conditions. Shimano Deore M410 Disc Brake CaliperReady for intense mountain bike adventures, this brake caliper delivers smooth and efficient braking with a minimalist design. It features a one way internal fluid circuit, which makes bleeding easy, while great piston retraction increases pad to rotor clearance. Shimano has also ensured that this post most model is Ice Tech compatible, so it can be used with Ice Tech pads (sold separately) for greater heat dissipation, reducing brake surface temperature by 50 degrees Celsius. Ice Technologies for All Conditions RidingThe fade, which can occur to disc brake rotor and pad when braking on a long downhill ride for instance, has a negative impact on the braking performance. Shimano has adopted Ice Technologies disc brake rotor and Ice Technologies pad to realize the cooling technology for consistent performance. The clad disc brake rotor blade, which has a 3 layer-sandwich structure of stainless steel, aluminum and stainless steel, provides better radiation performance. Also, the radiation fin has been adopted for the pad. Moreover, the clad disc brake rotor blade and the radiator fin provide long pad life, less noise, less fade and lightweight. Ice Technologies piston in order to achieve optimized lightweight, high rigidity and heat dissipation. Oversized pistons transfer hydraulic power directly to the brake pad, and ceramic material is used to avoid heat transfer for constant stable braking, providing efficient stopping power transfer without loss. One Way Bleeding“One Way Bleeding” was developed for quick and easy prevention of air in our hydraulic system. We have streamlined the oil route throughout the system to prevent air bubbles from being captured in the system. One way oil routing plus a funnel tool with mineral oil provides an easy and clean bleeding system. Features: Shimano M4100 Lever Features: Crank Arm Material: Alloy Use: MTB Design: Opening clamp band design with hinge Oil: For use with mineral oil only Adjustment: Reach reach I-spec-EV Compatible: Yes Single or Pair: Single Shimano M410 Caliper Features: Use: MTB Mount: Post mount Positioning: Front or Rear Piston: 2-piston Oil: Mineral oil Fluid Circuit: One way internal fluid circuit Mounting Bracket: Shim-less mounting bracket Fork Compatibility: International standard and post mount forks Brake Lever Compatibility: Shimano hydraulic brake levers Ice Tech Pad Compatible: Yes Single or Pair: Single Pads Included: Yes, comes as standard with resin padsManufacturer's Part Numbers: Left Hand Front (with 850mm hose): 3068006367 Right Hand Front (with 900mm hose): 3068006458 Right Hand Rear (with 1700mm hose): 3069010427 Left Hand Rear J-Kit (with 1700mm hose): 3069010938 Left Hand Rear (with 1700mm hose): 3069010949Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Deore M410 Disc Brake (M4100 Lever)The Deore M410 Disc Brake (M4100 Lever) from Shimano is for the avid mountain biker who wants a reliable hydraulic disc brake that delivers ultimate control and safety in all riding conditions.Shimano M4100 Brake LeverThis brake lever is engineered for fast-paced MTB riding, as it gives you exceptional stopping power and control on the toughest of rides. It features a rock-solid alloy construction, which makes it capable of handling all the sudden hits that come with weaving between the trails at speed. Shimano has also equipped this model with an adjustable lever reach, so you can set it up to perfectly match your hand size, personal preferences and the trail conditions. Shimano Deore M410 Disc Brake CaliperReady for intense mountain bike adventures, this brake caliper delivers smooth and efficient braking with a minimalist design. It features a one way internal fluid circuit, which makes bleeding easy, while great piston retraction increases pad to rotor clearance. Shimano has also ensured that this post most model is Ice Tech compatible, so it can be used with Ice Tech pads (sold separately) for greater heat dissipation, reducing brake surface temperature by 50 degrees Celsius. Ice Technologies for All Conditions RidingThe fade, which can occur to disc brake rotor and pad when braking on a long downhill ride for instance, has a negative impact on the braking performance. Shimano has adopted Ice Technologies disc brake rotor and Ice Technologies pad to realize the cooling technology for consistent performance. The clad disc brake rotor blade, which has a 3 layer-sandwich structure of stainless steel, aluminum and stainless steel, provides better radiation performance. Also, the radiation fin has been adopted for the pad. Moreover, the clad disc brake rotor blade and the radiator fin provide long pad life, less noise, less fade and lightweight. Ice Technologies piston in order to achieve optimized lightweight, high rigidity and heat dissipation. Oversized pistons transfer hydraulic power directly to the brake pad, and ceramic material is used to avoid heat transfer for constant stable braking, providing efficient stopping power transfer without loss. One Way Bleeding“One Way Bleeding” was developed for quick and easy prevention of air in our hydraulic system. We have streamlined the oil route throughout the system to prevent air bubbles from being captured in the system. One way oil routing plus a funnel tool with mineral oil provides an easy and clean bleeding system. Features: Shimano M4100 Lever Features: Crank Arm Material: Alloy Use: MTB Design: Opening clamp band design with hinge Oil: For use with mineral oil only Adjustment: Reach reach I-spec-EV Compatible: Yes Single or Pair: Single Shimano M410 Caliper Features: Use: MTB Mount: Post mount Positioning: Front or Rear Piston: 2-piston Oil: Mineral oil Fluid Circuit: One way internal fluid circuit Mounting Bracket: Shim-less mounting bracket Fork Compatibility: International standard and post mount forks Brake Lever Compatibility: Shimano hydraulic brake levers Ice Tech Pad Compatible: Yes Single or Pair: Single Pads Included: Yes, comes as standard with resin padsManufacturer's Part Numbers: Left Hand Front (with 850mm hose): 3068006367 Right Hand Front (with 900mm hose): 3068006458 Right Hand Rear (with 1700mm hose): 3069010427 Left Hand Rear J-Kit (with 1700mm hose): 3069010938 Left Hand Rear (with 1700mm hose): 3069010949Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Featuring an integrated seal that’s pre-assembled into the cups, SRAM’s PressFit 30 bottom bracket is designed to keep out dirt and water that could cause increased wear and tear. Simple to fit, it is designed for road and mountain bike (MTB) frames with bottom bracket shells with a 46mm inner diameter and cranksets with 30mm diameters. The key difference with PressFit 30 is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets. Frames will need a 46mm inner diameter bottom bracket shell to accommodate this system. PressFit 30 for road will require a 68mm wide shell while PressFit 30 for MTB will require a 73mm wide shell. When designing the SRAM PressFit 30 bottom bracket, the brand set out with the aim of combining the best of BB30 technologies with the best features of the Pressfit standard. The result of this is a sealed 30mm bearing system with superior bearing life. Manufacturer's Part Number: 00.6418.009.000
If you want to make sure you're making the most of every crank rotation, this is the bottom bracket to pair with your FSA ISIS type road bike chainset. With its forged titanium spindle and large upgraded bearings, it gives you super-smooth rotation and outstanding power transfer. Tech Info: Please note - The first two numbers in our options (eg. "68" 70 or "73") relate to how wide your bike's bottom bracket shell is in millimetres. The other three numbers (eg. 118) relate to how long your current bottom brackets spindle (axle) is in millimetres. The 68 and 73mm sizes are the "English thread" type, the 70mm size is the "Italian thread" type - please measure your bike's bottom bracket shell width to confirm which size you need.
Shimano Sora BR-R3000 Brake CaliperEnjoy reliable braking control with this Brake Caliper from Shimano. Made from lightweight and hard-wearing aluminium, this brake is ready to navigate technical routes and fast cornering and has been developed for long-lasting quality, no matter what challenge you meet on the road. Features:Material: AluminiumBrake Type: New Super SLR Dual PivotReach: 51mmMaximum Tyre Size: 28cWeight: 379gPart No: BR-R3000Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Designed for folding bikes or any bike with a braze-on fitting point on the head tube.
SRAM Red Brake Shoe and Pad SetSRAM Red Brake Pad and Holders are the ideal replacements to fit to your dual pivot SRAM Red calipers. They have a standard compound that's designed for use on alloy rims and performs well in all conditions. Features: Pads wear evenly and maximise caliper braking power Simple to replace Includes two pads and holdersBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Deore M615 Disc BrakeSpecifically developed for the demands of modern mountain bike (MTB) riding, this hydraulic disc brake features a tough aluminium build that makes it ready for wherever your off-road adventure takes you. Shimano has also equipped this model with a two-finger ergonomic brake lever design, which allows for smooth and reliable braking operation as you navigate from trail to trail. Another highlight is its tooled reach adjust, which means that riders can tweak the gap between the lever and their handlebar to fit their hand size. This ensures a more rider-tuned feel when braking even for riders with smaller hands. Coming complete with a BR-M615 caliper and many of the brand's finest technologies such as Servo Wave, One Way Bleeding and Ice Technology pad compatibility, this is a great choice of upgrade for confident braking performance as you conquer the trails.Features: Material: Aluminium Use: MTB Funnel Bleeding: Yes Hose Joint: Straight Lever Size: 2-finger ergonomic brake lever Oil: Shimano mineral oil Tooled Reach Adjust: Yes Servo Wave: Short stroke Servo Wave mechanism Type: Hydraulic disc brake Caliper Mount: Post Mount Lever Mount: I-Spec B Single or Pair: Single One Way Bleeding caliper Ice Technology pad compatible designManufacturer's Part Number: 85205546 Black 900mm Front-RHA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Tiagra 4700 Flat Bar Brake Levers - AUShips from Australia - Estimated delivery in 2-4 business days.Made especially for use with flat handlebars measuring 22.2mm, the Tiagra Flat Bar Brake Levers from Shimano are made from lightweight aluminium and suitable for use with Super SLR brake calipers. Features: For use with Super SLR brake calipers using enhanced brake arch design Aluminium construction to keep weight low and your bike looking good Comes complete with both reach and cable adjusters for easy set-up Single or Pair: Pair Clamp Diameter: 22.2mm Part No: BL-4700A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
A direct replacement for the bearings found in Nukeproof BSA & pressfit Hollowtech II / GXP bottom brackets, these bearings have a titanium coating which is applied in a vaporised vacuum environment, which allows its structure and density to be fine-tuned. The ti (titanium) coating helps prevent rust and damage from external elements. These MR2437 bearings are ABEC 5 certified and will suit all Nukeproof BSA & pressfit Hollowtech II / GXP bottom brackets as well as any other bottom bracket requiring a MR2437 bearing. Please Note: To use with a GXP crankset, you will need to reuse the adapter you will currently have fitted in the non-driveside bearing. Click here to view the Nukeproof Step by Step How to Guide for Bearing Replacement.
SRAM Guide-DB5 Hydraulic Disc Brake Hose KitReplacements for SRAM hydraulic disc brakesSpecificationsLenght: 2000mmCut-to-fit tubing kits for front or rear applicationsBuy SRAM Guide-DB5 Hydraulic Hose Kit from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vans Skate Washed Sports Bra was designed to be easy wearing, comfortable and supportive. Made from a 93% cotton and 7% elastane blend that gives the sports bra its stretchy and soft feel. The whole piece is finished with an allover gradient dip-dye finish that gives it a worn-in look. The center of the Washed Sports Bra features a woven logo patch to round out the piece.