Whether you're fitting new brakes or completely overhauling your brake cabling, this Shimano Dura Ace brake cable set contains everything you need to breathe new life back into your road bike's braking setup. Polymer Coated Stainless Steel Inner Wires Polymer coated stainless steel inner wires leave a smooth surface for low friction and reduced sliding resistance providing a lighter quicker braking operation. Special Spiral Wound Construction for Axial Rigidity The outer casing is lubricated internally along its length with low-friction silicone grease to reduce cable friction and the SLR casing uses a special spiral wound construction that is axially stiff yet can be bent around handlebar curves. The outer casing is also lined with a hard polymer sheath to keep its round shape to assist with the smooth operation of the inner wire. These Shimano Dura Ace brake cables are a great choice of upgrade for replacing your old or worn-out existing cables and enjoying powerful and consistent braking operation on your road bike.
To ensure the lowest possible friction, Jagwire developed a unique polymer-coated cable and paired it with Slick-Lube ultra-slick lubricant used throughout the liner. This combination delivers amazing performance and the precise lever feel you expect. Technologies: CSX: High carbon, low compression coiled steel around a Slick-Lube liner Sealed, Lubricated: Jagwire sealed systems, available only in DIY kits, include liners that run continuously from the lever to the brake or derailleur. This protects the cable and housing from dirt, mud or anything else that can cause friction. But because the liner runs the full length of the cable, Ultra-Slick polished inner cables are used to keep friction to a minimum. STS-EL: Pre-stretched, slick stainless steel spiral-bound cables with an ultra-slick polymer coating designed for use in Jagwire Sealed Kits Polymer-Coated or Polished Ultra-Slick Stainless Steel: These ultra-slick stainless cables deliver the ultimate low-friction performance. Jagwire offers two options: An ultra-slick polymer-coated cable for use in our Elite Sealed Systems with continuous housing/liners, or a highly polished, uncoated cable that can be used with any housing and lubricant. These Elite level cables deliver incredibly accurate, smooth performance. What's Included: (1) 2200mm CSX Brake Housing (1) 1350mm STS-EL Elite Polished Ultra-Slick Front Brake Inner Cable (1) 2000mm STS-EL Elite Polished Ultra-Slick Rear Brake Inner Cable (1) 1275mm Slick-Lube Liner (1) 1925mm Slick-Lube Liner (2) Open Brass End Caps (4) Open Alloy End Caps (2) Cable Tips (2) Grub Seals (2) 5G Tube Tops (2) Rotating Hooks
Jagwire Road Elite Sealed Brake Cable Kit
Jagwire Road Elite Sealed Gear Cable KitThis top-quality sealed gear kit uses a continuous liner that seals the system completely protecting it against dirt, mud and debris. To ensure the lowest possible friction, Jagwire developed a unique polymer-coated cable and paired it with Speed-Lube ultra-slick lubricant used throughout the liner. This combination delivers amazing performance and the precise lever feel you expect.Features: Housing Construction: XEX Outside Diameter: 5.0mm Housing Length: 1700mm Liner: Speed-Lube Liner Length: 2225mm Cable Construction: STS-LF Polymer-coated Slick Stainless Compatibility: SRAM or Shimano road brakes Front Cable Length: 2300mm Rear Cable Length: 2300mm Includes: 1x 1700mm XEX shift housing 2x 2225mm Speed-Lube liners 2x 2300mm STS-LF Polymer-coated shift inner cables 2x LEX-SD 4mm shift housing segments, 300mm 3x open Brass end caps 4x open Alloy end caps for 5mm housing 2x open Alloy end caps for 4mm housing 2x pro indexed inline adjusters (4mm/5mm) 2x housing connectors (4mm/5mm) 2x non-crimp cable tips 2x grub seals 2x 5G Tube Tops 2x Rotating Hooks Technologies: XEX: Lightweight, braided steel strands around a Slick-Lube liner Sealed, Lubricated: Jagwire sealed systems, available only in DIY kits, include liners that run continuously from the lever to the brake or derailleur. This protects the cable and housing from dirt, mud or anything else that can cause friction. But because the liner runs the full length of the cable, Ultra-Slick polished inner cables are used to keep friction to a minimum. STS-LF: Pre-stretched, slick stainless steel spiral-bound cables with an ultra-slick polymer coating designed for use in Jagwire Sealed Kits Polymer-Coated or Polished Ultra-Slick Stainless Steel: These ultra-slick stainless cables deliver the ultimate low-friction performance. Jagwire offers two options: An ultra-slick polymer-coated cable for use in our Elite Sealed Systems with continuous housing/liners, or a highly polished, uncoated cable that can be used with any housing and lubricant. These Elite level cables deliver incredibly accurate, smooth performance.Buy Jagwire Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Jagwire Road Elite Sealed Gear Cable KitThis top-quality sealed gear kit uses a continuous liner that seals the system completely protecting it against dirt, mud and debris. To ensure the lowest possible friction, Jagwire developed a unique polymer-coated cable and paired it with Speed-Lube ultra-slick lubricant used throughout the liner. This combination delivers amazing performance and the precise lever feel you expect.Features: Housing Construction: XEX Outside Diameter: 5.0mm Housing Length: 1700mm Liner: Speed-Lube Liner Length: 2225mm Cable Construction: STS-LF Polymer-coated Slick Stainless Compatibility: SRAM or Shimano road brakes Front Cable Length: 2300mm Rear Cable Length: 2300mm Includes: 1x 1700mm XEX shift housing 2x 2225mm Speed-Lube liners 2x 2300mm STS-LF Polymer-coated shift inner cables 2x LEX-SD 4mm shift housing segments, 300mm 3x open Brass end caps 4x open Alloy end caps for 5mm housing 2x open Alloy end caps for 4mm housing 2x pro indexed inline adjusters (4mm/5mm) 2x housing connectors (4mm/5mm) 2x non-crimp cable tips 2x grub seals 2x 5G Tube Tops 2x Rotating Hooks Technologies: XEX: Lightweight, braided steel strands around a Slick-Lube liner Sealed, Lubricated: Jagwire sealed systems, available only in DIY kits, include liners that run continuously from the lever to the brake or derailleur. This protects the cable and housing from dirt, mud or anything else that can cause friction. But because the liner runs the full length of the cable, Ultra-Slick polished inner cables are used to keep friction to a minimum. STS-LF: Pre-stretched, slick stainless steel spiral-bound cables with an ultra-slick polymer coating designed for use in Jagwire Sealed Kits Polymer-Coated or Polished Ultra-Slick Stainless Steel: These ultra-slick stainless cables deliver the ultimate low-friction performance. Jagwire offers two options: An ultra-slick polymer-coated cable for use in our Elite Sealed Systems with continuous housing/liners, or a highly polished, uncoated cable that can be used with any housing and lubricant. These Elite level cables deliver incredibly accurate, smooth performance.Buy Jagwire Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Features: E-tube SEIS Y-split electric wire (3 connectors) Cable lengths 250 mm / 350 mm / 50 mm Reliable and secure water resistant connectors
Giant Surelock Protector 1 DT is a robust Sold Secure Gold approved D lock featuring a 14mm ultra hardened steel bar with a 10mm 120cm cable for additional security includes 4 standard and 1 LED key.Features- 14mm ultra hardened steel bar- Lock: X4p quattro bolt locking mechanism- Zinc caps- M-Key cylinder- Integrated dust cover- 4 standard keys and 1 LED key- All tube QR mounting bracket 24-40mm tubes- Additional 10mm x 120cm cable- Sold Secure Gold Rated D LockSizes- Dimensions: 115mm width 230mm long- 10mm x 120cm cable
Don’t let some jerk steal your bike! Since SeaSucker bike racks aren’t bolted on to rooftop bars, we came up with a way to keep your bike safe. A Cable Anchor is just what it sounds like - an anchor point to securely connect a cable loop to your car. The Cable Anchor - Trunk, has a steel rod that closes inside a trunk or hatchback seam. The Cable Anchor - Window, slides over the glass and rolls up into the window frame. Each is made of polished stainless steel and has a wide 1.375" hole to thread a cable lock through. The Cable Anchor - Window, is not recommended for tinted windows.
Key Features:Professional quality cable and spoke cutter for Shimano SP.Features inner wire and outer casing reconditioner.Steel construction.
Complete top-of-the-range brake cable set designed to suit Dura-Ace 9000 brakesFitting new brakes or completely overhauling your brake cabling couldn't be easier - everything you need in one packIncludes 1.6 mm Polymer coated inner wires (1 x 2000 mm, 1 x 1000 mm), and SLR outer casing for a complete bike (1 x 1800 mm, 1 x 800 mm), and all end capsPolymer coated stainless steel inner wire leaves a smooth surface for low friction and reduced sliding resistance giving a lighter quicker braking operationOuter casing is lubricated internally along its length with low-friction silicone grease to reduce cable frictionSLR casing uses a special spiral wound construction that is axially stiff yet can be bent around handlebar curvesThe outer casing is lined with a hard polymer sheath to keep its round shape to assist with the smooth operation of the inner wire.
capgo OL Brake Set for Shimano Road, Sram Road and Campag Road feature Orange Line (OL) Cable Housing which uses a specially developed PTFE grease from capgo. The housing is fully greased along its entire length which helps to drastically reduce friction and increase durability. This housing also features kevlar strands to improve feel of the brakes.In addition to this the sets use the OL Stainless Steel wires which feature a unique double polish process to reduce friction. Key Features: Best brake performance with low friction,PTFE greased housing with Kevlar,OL 'Double Polished' Stainless Steel Inner Wire,. Contents: 1x capgo OL 1800mm Brake Cable Housing greased 5mm,1x capgo OL 800mm Brake Cable Housing greased 5mm,2x capgo OL 2000mm Brake Inner Cable 1.5mm slick stainless steel Road,4x capgo OL Open End Cap for 5mm Brake Housing Black Alloy,2x capgo OL Cable Tips for 1.00-1.80mm Wires Black Alloy.
capgo OL Shift Set feature Orange Line (OL) Cable Housing which uses a specially developed PTFE grease from capgo. The housing is fully greased along its entire length which helps to drastically reduce friction and increase durability. OL housing also uses Kevlar strands to improve the precision of the shifting.In addition to this the OL sets use the OL Speed Slick Stainless Steel wires which has a special double polished process to reduce friction. Key Features: For highest shift performance with low friction,PTFE greased housing with Kevlar,“Speed” slick for smoother and faster shifting,“Speed” Slick Inner Cable Stainless,Sealed Alloy End Caps,Tube Seal for Derailleur,. Contents - Long: 1x capgo OL 3300mm Shift Cable Housing, 2x capgo OL 2200mm Shift Inner Cable 1.1mm „speed“ slick stainless steel Shimano, 9x capgo OL Sealed End Cap for Shift Housing Black Alloy, 1x capgo OL Nose End Cap for Shift Housing Black Alloy, 1x capgo OL Tube Seal for Nose End Cap Black, 2x capgo OL Cable Tip for 1.00-1.80mm Wires Black Alloy.