Measuring a 38mm profile and 27.5mm width, this wide, aero rim is superbly streamlined for a speedy soar over a variety of under-wheel conditions. Tubeless-ready to meet the expectations of the modern all-rounder rider, it is equipped with 20 (front) and 24 (rear) spoke holes, giving way to a sturdy reinforcement when fully built. Stiff, responsive and lightweight from its carbon build, the BlackEdition 38 Carbon Road Rim is the ideal pick for riders after a rim for any situation.
Ritchey WCS Carbon Evocurve Road HandlebarBoasting a carbon fibre construction, internal cable routing and comfortable geometry, this drop handlebar is well-equipped for the demands of modern road cycling and cyclocross (CX) racing. Thanks to its carbon fibre build, this model delivers excellent strength, stiffness and low weight performance, making it perfect at handling training miles and competitive events. Ritchey has also equipped it with a matte unidirectional (UD) carbon fibre finish to complement your ride without adding any unnecessary weight.Carbon Fibre Drop Handlebar with Internal Cable RoutingIn addition to full or partial internal cable routing, this revised Ritchey WCS Carbon EvoCurve handlebar features a short reach, shallow drop, and a 4-degree sweep at the ergonomic top section. Its smooth, double-radius drops afford great hand position, and its centre section is aero bar compatible. The no-slip grit at stem and brake lever mounting surfaces ensures confident installation, while position lines make sure levers are installed accurately. Inspired by a lifetime of experiences, the WCS Carbon EvoCurve delivers top level performance for athletes at the highest levels of road and 'cross racing as well as more mortal riders looking for excellence in all of their riding.Features: Material: Carbon Fibre Finish: Matte unidirectional (UD) Carbon Fibre Use: Road, Cyclocross (CX) Width: Multiple options available to select Drop: 130mm Reach: 80mm Flare Out: 2° Backsweep: 4° Clamp Diameter: 31.8mm Accessory Mount Diameter: 31.8mm Cable Routing: Full or partial internal Shimano Compatibility: Compatible with Shimano EW-RS910 junction box Clip-on Compatible: Yes Lever/Shifter Torque: 5Nm (recommended) Stem Clamp Torque: 5Nm (max) Ritchey Stem Compatibility: Compatible with Ritchey C260 stem (available separately) Weight: 215g (420mm option)Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Prime BlackEdition 38 Carbon Road RimMade with the very best of modern road-wheel tech, this steady and speedy effort from Prime is carbon-built, with a big-performance, beat-the-clock attitude. With a 38mm deep rim profile for ultimate aerodynamics and a 25mm width to give a confidence-inspiring surface contact with every rotation, it's more than equipped to provide a fast-paced and precise run. Tubeless-Ready Carbon Fibre Road RimThe front version features a 20 spoke design while the rear benefits from 24, allowing you to give ample reinforcement and a flex-free form to your full build. Complete with tubeless ready technology for enhanced rolling efficiency and greater braking grip when larger, lower inflation tyres are added, this versatile, velocity-fuelled rim does not disappoint. Features:Material: T700 Unidirectional Carbon FibreRim Dimensions: Profile: 38mm; Internal Width: 19mm; External Width: 27.5mmSpoke Holes: Front: 20; Rear: 24Tubeless Ready: YesWeight: 480gBuy Prime Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Prime BlackEdition 38 Carbon Road RimMade with the very best of modern road-wheel tech, this steady and speedy effort from Prime is carbon-built, with a big-performance, beat-the-clock attitude. With a 38mm deep rim profile for ultimate aerodynamics and a 25mm width to give a confidence-inspiring surface contact with every rotation, it's more than equipped to provide a fast-paced and precise run. Tubeless-Ready Carbon Fibre Road RimThe front version features a 20 spoke design while the rear benefits from 24, allowing you to give ample reinforcement and a flex-free form to your full build. Complete with tubeless ready technology for enhanced rolling efficiency and greater braking grip when larger, lower inflation tyres are added, this versatile, velocity-fuelled rim does not disappoint. Features:Material: T700 Unidirectional Carbon FibreRim Dimensions: Profile: 38mm; Internal Width: 19mm; External Width: 27.5mmSpoke Holes: Front: 20; Rear: 24Tubeless Ready: YesWeight: 480gBuy Prime Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
This is the first seatpost that’s compliant AND aerodynamic—a total win win. We initially developed the Pavé seatpost for the all-new Roubaix and it’ll make a fantastic addition to your Tarmac SL6. Of course it’s also designed to make fine-tuning your saddle position a breeze with a single-bolt adjustable head and two setback options. FACT carbon construction paired with a D-shaped seatpost that’s compatible with the 2020 Roubaix and Taramc SL6. Engineered to have the saddle move in a perfect arc aka a back & downward motion. Setback: 20mm/0mm Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt. Length: 380mm/450mm Approximate Weight: 209g
Selle Italia WATT Ironman Carbonio Superflow SaddleEngineered for triathlon racing, this saddle features a high-quality fibra-tek cover that uses its technical material to guarantee fantastic strength and durability on your ride. Selle Italia has also equipped this model with a shell that combines carbon composite and high-grade nylon polymer for a superior strength to weight ratio. Another highlight is its carbon rails, which ensure a strong and secure hold to your seatpost without weighing down your bike with unnecessary excess grams. Developed specifically for the intensity of racing, it also has a Superflow channel that runs down its middle section for relieving pressure and reducing numbness and fatigue. This makes it a great choice of upgrade for staying comfortable and supported as you remain focused on the podium.Revised Shape and Wider NoseThe revised seat of the Watt - more rearward and anatomical - allows the triathlete to avoid possible friction during the push phase and, combined with an enlarged nose (50mm), to benefit from greater comfort without altering performance.Ironman LogoThe Watt “Ironman Edition” shows the logo of the most important triathlon circuit in the world on the back. The hallmark for a product of excellence.Features: Cover Material: Fibra-Tek Shell Material: Carbon Composite and High Grade Nylon Polymer Rails Material: Carbon (+10mm) Use: Triathlon Dimensions: 133x255mm Gender: Unisex Category: Performance Cut Out Channel: Superflow Weight: 195gManufacturer's Part Number: 070A520ICA006 Black U3Buy Selle Italia Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Easton EC70 Aero Carbon Road HandlebarThis lightweight Carbon Road Handlebar features an ergonomic design for a race ready design that'll steer you to silverware.The EC70 Handlebar features the same top of the line Maximum Contact Drop (MCD) shape technology for easy position transferring. Taperwall to maintain stiffness while reducing weight and Intelligent Flexibility for added vibration dampening comfort. It also features recesses for cables and comes in four lengths.Features:Material: Easton EC70 CarbonBar Clamp Diameter: 31.8mmReach: 85mmDrop: 125mmWidth:(C-to-C at hoods): 40-, 42-, 44-, 46cmInternal Cable Routing: YesFinish: Unidirectional Matte CarbonWeight: 255g (approx.)Buy Easton Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Prime Primavera Aero Carbon HandlebarWith a lighter, stiffer and stronger design, this aero handlebar builds on the success of the original Primavera model, yet carries over many of the features, that made the original so popular. It features a high modulus carbon fibre construction, which makes it super-light at only 228g for the 42cm option. Its carbon build also ensures that riders benefit from exceptional strength, stiffness and precise handling when both training and competing. Race-Ready Carbon Fibre Aero BarDesigned to cheat the wind for maximum speed, this lightweight, race-ready aero handlebar also features a super comfortable 122mm drop and 76.5mm reach, so you can enjoy a smooth and reliable ride when tackling everything from a short crit to an eight-hour epic ride. Internal Cable Routing and Di2 CompatibleNo stranger to the finer details, this aerobar is kitted out with internal cable routing as well as Shimano Di2 compatibility. This makes it easy for riders to hide their mechanical or electronic system cables inside its construction for further watt savings while also freeing up valuable space. Whether you're training or competing, the Prime Primavera Aero Carbon Handlebar is a great upgrade for performance-boosting aerodynamics, comfortable geometry and an ultra-lightweight design.Prime Test ResultsPrime carried out several tests when comparing this updated aero handlebar to its predecessor. You can find all the results below:- This revised Prime bar is 13% lighter when compared to the previous model.- On the vertical stiffness test this Prime bar has 20.5% less deformation and has 29.5% increased vertical stiffness.- On the horizontal stiffness test this Prime bar has 10.2% less deformation and has 11% increased horizontal stiffness.- On the rotational stiffness test this Prime bar has 17.5% less deformation and has 21.4% increased rotational stiffness.- On average this Prime bar is 20.6% stiffer with 16% less deformation.Features: Material: Carbon Fibre Use: Road, Triathlon and Time Trial Diameter: 31.8mm Reach: 76.5mm Drop: 122mm Cable Routing: Internal, Shimano Di2 compatible Flared Aero Tops Width measured centre to centre Weight: 228g (42cm option)Buy Prime Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Northern California Coast and Santa Cruz Mountains are steeped in road riding history. To honour it, Praxis Works named its new top-level crank Zayante, after the fabled redwood-covered climb that's a secret training ground for many local pros. The Zayante Carbon is the ultimate marriage of lightness, stiffness and versatility. Carbon Fibre Road Chainset Made exclusively in Praxis Works' own carbon lab, the Zayante is a homegrown product from start to finish. From initial napkin sketches, to rapid prototyping, revision after revision, exhaustive testing and certification for production. Developed and made in-house with the brand's hybrid "RTM+Filimant Winding" manufacturing methods, everything is done by a dedicated team. LevaTime X-Spider and X-Rings With its elegant and shapely carbon arms the Zayante is in a class of its own. This past year Praxis Works went further and updated it with its LevaTime X-Spider and X-rings. Now weighing in at a feathery 620 grams the Zayante Carbon has improved on its already solid reputation as the go-to crank carbon crank for riders globally. Please note: A bottom bracket is not included with this chainset but is available separately. This chainset is compatible with a Praxis Works M30 BB86 bottom bracket. Praxis M30 bottom brackets have a 30mm Drive and a 28mm NonDrive Bearing. These are specifically made for use with Praxis M30 spindle cranks. A drive-side wave washer is used for preload of the bearings. Born and based in the cycling mecca of Santa Cruz, California, Praxis creates and manufactures some of the best bicycle parts on the globe. Manufacturer's Part Numbers: 89222976 Black 48/32T 170mm 89222975 Black 48/32T 175mm 89222978 Black 50/34T 165mm 89222987 Black 50/34T 170mm 89222977 Black 50/34T 172.5mm
The Easton EC70 aero will give you an extra aerodynamic advantage as you're attacking on race day. It's also very lightweight at only 255g, due to its TaperWall technology and monocoque carbon fibre construction. This also makes it it's rigid for precise handling and to ensure none of your power output is wasted through unwanted flex. With this advanced carbon road bar installed on your ride, you'll stay comfortable while reducing drag. Boasting a flattened top profile, internal cable routing and MCD shape technology, it provides more comfort during long days in the saddle while cheating the wind. Plus, thanks to the ergonomic profile and a less radically shaped bend, Easton EC70 aero carbon road handlebar provides better control in various riding positions.
Truvativ X0 Carbon 10 Speed PF30 CranksetWhether you're spending the day shredding the trails with your riding buddies or exploring new mountain routes on your own adventure, this chainset is engineered for reliable performance wherever your ride leads you. Benefitting from two carbon crank arms, this chainset offers an excellent balance of stiffness, durability and overall low weight performance as you charge across rock gardens, tree roots and debris. Its carbon crank arm construction also means that you'll benefit from its fantastic strength properties, without adding any unnecessary excess grams to your drivetrain. Coming complete with two chainrings and a PF30 bottom bracket, this is a perfect choice of upgrade for powering you from trail to trail.Features: Crank Arm Material: Carbon Use: Mountain Bike (MTB) Speed: 10 speed Crank Arm Length: 175mm Tooth Count: 38/24T Number of Chainrings: 2 Bottom Bracket Compatibility: PF30 Bottom Bracket Included: YesManufacturer's Part Number: 90390210013 Black/White 38T 38.24T 175mmBuy Truvativ Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Praxis Works Zayante X Carbon 2x10-11 Speed ChainsetThe Northern California Coast and Santa Cruz Mountains are steeped in road riding history. To honour it, Praxis Works named its new top-level crank Zayante, after the fabled redwood-covered climb that's a secret training ground for many local pros. The Zayante Carbon is the ultimate marriage of lightness, stiffness and versatility.Carbon Fibre Road ChainsetMade exclusively in Praxis Works' own carbon lab, the Zayante is a homegrown product from start to finish. From initial napkin sketches, to rapid prototyping, revision after revision, exhaustive testing and certification for production. Developed and made in-house with the brand's hybrid "RTM+Filimant Winding" manufacturing methods, everything is done by a dedicated team.LevaTime X-Spider and X-RingsWith its elegant and shapely carbon arms the Zayante is in a class of its own. This past year Praxis Works went further and updated it with its new LevaTime X-Spider and X-rings. Now weighing in at a feathery 620 grams the Zayante Carbon has improved on its already solid reputation as the go-to crank carbon crank for riders globally.Please Note: This chainset comes complete with a Praxis Works M30 BB86 bottom bracket. Praxis M30 bottom brackets have a 30mm Drive and a 28mm NonDrive Bearing. These are specifically made for use with Praxis M30 spindle cranks. A drive-side wave washer is used for preload of the bearings.Born and based in the cycling mecca of Santa Cruz, California, Praxis creates and manufactures some of the best bicycle parts on the globe.Features: Crankarm Material: Carbon Spider and Chainrings Material: Aluminium Use: Road Speed: 10/11 speed BCD: 160/104 Spindle: Alloy M30 spindle (30mm/28mm) Q-Factor: 147mm Number of Chainrings: 2 Chainrings Included: Yes (5mm thick) Chainring Mount: 4-Bolt Bottom Bracket Included: No, available separately (M30 BB86 bottom bracket compatible) Weight: 620g (approx)Manufacturer's Part Numbers: 89222976 Black 48/32T 170mm 89222975 Black 48/32T 175mm 89222978 Black 50/34T 165mm 89222987 Black 50/34T 170mm 89222977 Black 50/34T 172.5mmBuy Praxis Works Components from Chain Reaction Cycles, the World's Largest Online Bike Store.