These Wolf Tooth chainring bolts come as a pack of four and feature chainring bolts that are made from a rock-solid aluminium construction. This makes them great for holding your single-speed chainring securely in place on your adventures. Compatibility: Any of Wolf Tooth's bolt-on Drop-Stop chainrings with through holes. Works with other brand's single chainrings as well. Manufacturer's Part Numbers: Black: WT4CBCN06BLK; Blue: WT4CBCN06BLU; Gold: WT4CBCN06GLD; Green: WT4CBCN06GRN; Grey: WT4CBCN06GRY; Orange: WT4CBCN06ORG; Purple: WT4CBCN06PRP; Red: WT4CBCN06RED; Silver: WT4CBCN06SIL; Nickel: WT4CBCN06NI
These Wolf Tooth chainring bolts can also be used with non-Wolf Tooth branded single chainrings as well that feature a 110mm or 130mm BCD. Coming equipped with a tough aluminium construction, this kit is a great upgrade for replacing old or lost chainring bolts and breathing new life back into your setup. Wolf Tooth designed these bolts to be the best on the market. These single chainring optimised bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut, so no spanner is needed. These are 6mm long, so they work perfectly with any bolt on single chainring that does not have threaded standoffs.
Wolf Tooth Cyclocross 110 BCD ChainringThis chainring is specifically designed for cyclocross use. It features Wolf Tooth's renowned Drop-Stop technology, which uses a patented wide/narrow chainring profile to spread the load and improve chainring life. In addition, it also allows for excellent mud clearance, which results in reduced friction. This makes it a great choice of upgrade for multiple riding disciplines from cyclocross to commuting. Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our Drop-Stop technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on-road applications with the giant 50t rings. Fits 110 BCD 5 arm cranksets. Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment. Compatibility:These rings are for use with 110 BCD 5 arm cranksets. Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting.Chainline - varies - these rings can be mounted in either the big or small ring position on a double cranksets. The most common mounting is in the big ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring).Features: Material: 7075-T6 Aluminium Use: Cyclocross BCD: 110mm Number of Chainrings in the Box: One Made in the USA Part Numbers: 44T: WT11044; 46T: WT11046 Weight: 44T: 90g; 46T: 107gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Cyclocross 130 BCD ChainringThis chainring is specifically designed for cyclocross use. It features Wolf Tooth's renowned Drop-Stop technology, which uses a patented wide/narrow chainring profile to spread the load and improve chainring life. In addition, it also allows for excellent mud clearance, which results in reduced friction. This makes it a great choice of upgrade for multiple riding disciplines from cyclocross to commuting.Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our Drop-Stop technology. Since their release, the uses for these rings has expanded beyond cyclocross to commuting, gravel riding, and even full on-road applications with the giant 52T rings. Fits 130 BCD 5 arm cranksets. Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment. Compatibility:These rings are for use with 130 BCD 5 arm cranksets. Do NOT fit on the cranksets for Shimano DA 9000 / Ultegra 6800. Not compatible with Campy CX10/11. Chain Compatibility:10, 11, & 12spd Eagle and Flattop - These chainrings are designed to work with all 10-speed and 11-speed chains. They also work with 12 speed SRAM Flattop, SRAM Eagle and KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain. If using a 9-speed drivetrain use a 10-speed chain as it fits tighter for better chain retention. SRAM Exogram cranksets with inset nut must use stock fifth bolt + spacer(s). The Force CX1 bolt features fifth bolt with a 1x specific shoulder. This kit can be found online. Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position. 38T important note: The chain may contact the spider arm slightly when using the 38T chainring. We recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for a 39T smallest ring. Features: Material: 7075-T6 Aluminium Use: Cyclocross BCD: 130mm Number of Chainrings in the Box: One Made in the USA Part Numbers: 38T: WT13038; 40T: WT13040; 42T: WT13042; 44T: WT13044; 46T: WT13046; 48T: WT13048; 50T: WT13050 and 52T: WT13052 Weight: 38T: 52g; 40T: 60g; 42T: 62g; 44T: 79g; 52T: 132gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Cyclocross 130 BCD ChainringThis chainring is specifically designed for cyclocross use. It features Wolf Tooth's renowned Drop-Stop technology, which uses a patented wide/narrow chainring profile to spread the load and improve chainring life. In addition, it also allows for excellent mud clearance, which results in reduced friction. This makes it a great choice of upgrade for multiple riding disciplines from cyclocross to commuting.Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our Drop-Stop technology. Since their release, the uses for these rings has expanded beyond cyclocross to commuting, gravel riding, and even full on-road applications with the giant 52T rings. Fits 130 BCD 5 arm cranksets. Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment. Compatibility:These rings are for use with 130 BCD 5 arm cranksets. Do NOT fit on the cranksets for Shimano DA 9000 / Ultegra 6800. Not compatible with Campy CX10/11. Chain Compatibility:10, 11, & 12spd Eagle and Flattop - These chainrings are designed to work with all 10-speed and 11-speed chains. They also work with 12 speed SRAM Flattop, SRAM Eagle and KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain. If using a 9-speed drivetrain use a 10-speed chain as it fits tighter for better chain retention. SRAM Exogram cranksets with inset nut must use stock fifth bolt + spacer(s). The Force CX1 bolt features fifth bolt with a 1x specific shoulder. This kit can be found online. Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position. 38T important note: The chain may contact the spider arm slightly when using the 38T chainring. We recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for a 39T smallest ring. Features: Material: 7075-T6 Aluminium Use: Cyclocross BCD: 130mm Number of Chainrings in the Box: One Made in the USA Part Numbers: 38T: WT13038; 40T: WT13040; 42T: WT13042; 44T: WT13044; 46T: WT13046; 48T: WT13048; 50T: WT13050 and 52T: WT13052 Weight: 38T: 52g; 40T: 60g; 42T: 62g; 44T: 79g; 52T: 132gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Wolf Tooth Direct Mount Chainring for Cane Creek Titanium eeWing cranks with 12-speed HyperGlide+ Chain is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x set ups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with 12-speed HyperGlide+ chains, this direct mount chainring means more time riding and less time fumbling with dropped chains. The nickel-plated finish looks stunning and works fantastically with both eeWing and SRAM direct mount cranksets.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go. Key Features: Cane Creek eeWing cranksets,SRAM 3 bolt direct mount cranksets,. Compatibility:Compatible with Shimano 12-speed Hyperglide+ chains on bikes with boost and non-boost spacing.
The Wolf Tooth Direct Mount Chainring for Race Face Cinch is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with Race Face Cinch cranks, this direct mount chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Compatibility:Any Race Face Cinch™ system crankset.,Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability,Both standard (142mm rear hub spacing) and Boost (148mm hub spacing) offsets available. ,For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle),Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).,Chainline: Standard Offset 49mm for 26-34t, 51mm for 36t (additional chainstay clearance),Chainline: Boost Offset 52mm .
The Wolf Tooth Direct Mount Chainring for SRAM Cranks is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x set ups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with SRAM Cranks, this direct mount chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Compatibility:9, 10, 11, & 12spd Eagle - These chainrings are designed to work with all 9 speed, 10 speed, and 11 speed chains. They also work with 12 speed Eagle and 12 speed KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain or SRAM 12 speed Flattop chain.,If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention.
The Wolf Tooth Direct Mount Flattop Chainring for Easton Cinch is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with Easton Cinch cranks and SRAM 12-speed Flattop chains, this direct mount chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Compatibility:Easton Cinch™ cranksets including EC90SL,Works with SRAM Flattop chain,Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability,Chain Compatibility,10, 11, & 12spd Eagle and Flattop - These chainrings are designed to work with all 10-speed and 11-speed chains. They also work with 12 speed SRAM Flattop, SRAM Eagle and KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain.,Shimano 12-speed chains require the use of our Shimano 12-speed specific chainrings,If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention.
The Wolf Tooth Direct Mount Flattop Chainring for SRAM Cranks is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x set ups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with SRAM Cranks and 12-speed Flattop chains, this direct mount chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Compatibility:10, 11, & 12spd Eagle and Flattop - These chainrings are designed to work with all 10-speed and 11-speed chains. They also work with 12 speed SRAM Flattop, SRAM Eagle and KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain.,If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention.
Wolf Tooth Direct Mount Mountain Bike Chain RingThis high-quality chainring is perfect for fast and rowdy MTB use as it delivers powerful torque performance as you blast across the mountains. It features a rock-solid aluminium construction which makes it exceptional at handling the increased pressure which comes with all-day epics and off-road adventures. Developed or use with your SRAM crankset which has SDM fitment, this fantastic component replaces your existing upper spider and chainring with one lightweight component.Features: Material: 7075-T6 Aluminium Use: Mountain Bike (MTB) and Road Mount: Direct Mount Compatibility: SRAM cranksets with SDM fitment Weight: 65g (32T); 90g (38T) and 111g (42T)Compatibility Information:These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8 bolt mounting interface that is not compatible with these chainrings.Wolf Tooth's patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud shedding ability.Chain Compatibility:- All 9, 10, 11 speed chains as well as 12 speed SRAM Eagle, Campagnolo, KMC and SRAM Flat Top AXS chains - They do not work with Shimano 12 speed Hyperglide+ chains.- Shimano 12-speed chains require the use of our Shimano 12-speed specific chainrings.- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention.Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Wolf Tooth Elliptical 110 BCD 4 Bolt Chainring for Shimano GRX is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with Shimano GRX drivetrains, this Wolf Tooth 110 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.PowerTracWolf Tooth’s PowerTrac Elliptical (PTE) design, as the name indicates, is driven by a concern for power and traction – and crucially for you, premised on a wealth of knowledge from precision engineers who also love to ride bikes.A growing number of riders are converting to elliptical chainrings on 1x setups for the simple reason that they have been demonstrated to improve ride quality.The idea behind elliptical chainrings can be summarised as follows: biomechanical power output varies throughout a pedal stroke, at positions where power is higher, having a larger diameter section of chainring, and thus greater engagement area, translates into greater forward propulsion. At positions where biomechanical power is lower, a smaller chainring diameter means greater efficiency in rotation. Overall what this means for you is maximised power output throughout each pedal stroke.Wolf Tooth note that elliptical rings also mean steadier torque on the rear wheel as there is less spinning on the downstroke and easier rotation in between these. Steadier torque on the rear wheel gives better traction and sustained momentum – great on tough climbs and through headwinds.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go. Key Features: Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Elliptical design,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish,. Compatibility: Shimano GRX cranksets including RX600 and RX810, Drop-Stop® FT tooth profile is compatible with 9, 10, 11 and 12-speed chains (including SRAM Flattop),Not compatible with Shimano HG+ 12-speed chains .