This stunning model features a 14-tooth (upper) and 18-tooth (lower) pulley with a narrow-wide profile. Additionally, its unique narrow-wide tooth profile of the pulleys ensures durable chain retention It's fitted with a custom designed, strong carbon fibre pulley cage assembly for long durability and light weight. The cage design allows you to choose between two spring tension settings to customise performance and reduce chain drag. We recommend initial setup in the lower spring tension. This has been designed to leave the clutch mechanism fully functional for chain retention. Finally, thanks to the high-quality CeramicSpeed Bearings inside, your product will benefit from 3-5 times longer lifetime compared to stock. The OSPW X System for SRAM 1x has been tested to deliver 30-40% less friction than conventional systems. Compatibility: • SRAM Force 1X 11 speed with Type 3 clutch and cage lock position 8 o’clock. • SRAM Rival 1X 11 speed with Type 3 clutch and cage lock position 8 o’clock. NOT compatible with Apex 1 due to a difference in cage lock des
CeramicSpeed SRAM Type 3 1x11 Speed Clutch OSPWThis high-quality OPWS is specifically designed for use with your SRAM Rival or Force 1 type 3 derailleur for outstanding performance optimisation. This model wraps your chain around its 14T upper and 18T lower narrow-wide pulley wheels for reduced friction and watt savings starting at 2.4W, so you can enjoy increased speed and a more efficient drivetrain.Features: Material: Pulley Wheels: Aluminium; Cage: Carbon reinforced PA Compatibility: SRAM Rival or Force 1 Type 3 Pulley Wheels: 14T upper and 18T lower narrow-wide pulley wheels Cassette Compatibility: Fits cassettes up to 42-tooth Speed: 11 speed Use: Road, GravelBuy CeramicSpeed Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
CeramicSpeed SRAM Type 3 1x11 Clutch OSPWThis high-quality OPWS is specifically designed for use with your SRAM Rival or Force 1 type 3 derailleur for outstanding performance optimisation. This model wraps your chain around its 14T upper and 18T lower narrow-wide pulley wheels for reduced friction and watt savings starting at 2.4W, so you can enjoy increased speed and a more efficient drivetrain.Features: Material: Pulley Wheels: Aluminium; Cage: Carbon reinforced PA Compatibility: SRAM Rival or Force 1 Type 3 Pulley Wheels: 14T upper and 18T lower narrow-wide pulley wheels Cassette Compatibility: Fits cassettes up to 42-tooth Speed: 11 speed Use: Road, GravelBuy CeramicSpeed Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Replacement Federal Freecoaster Clutch Spring Kit
Replacement clutch spring kit for the Federal freecoaster hubs.
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong Full 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. The Clutch V2 is laced to the G-Sport Ribcage Rim. At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for&G-Sport in an on-site foundry. It is a lightweight rim that can take anything you throw at it. With the Ribcage, the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. ###section### Product Specs WHEEL SIZE: 20" HUB: Odyssey Clutch V2 Freecoaster AXLE: 14mm Chromoly Male DRIVE SIDE: Right Side Drive RIM: G-Sport Ribcage SPOKES: Butted NIPPLES: Brass WEIGHT: 1389g / 49oz
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong Full 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. The Clutch V2 is laced to the G-Sport Ribcage Rim. At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for&G-Sport in an on-site foundry. It is a lightweight rim that can take anything you throw at it. With the Ribcage, the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. ###section### Product Specs WHEEL SIZE: 20" HUB: Odyssey Clutch V2 Freecoaster AXLE: 14mm Chromoly Male DRIVE SIDE: Left Side Drive RIM: G-Sport Ribcage SPOKES: Butted NIPPLES: Brass WEIGHT: 1389g / 49oz
RIDE FREE Ditch the heavy pack and saggy saddlebag with the all-new Clutch Crank Storage. Lightweight and right there when you need it with six allens a chain tool and a spoke wrench the Clutch Crank Storage can solve just about any trail-side mechanical. Features The smallest multi-function crank-stored tool on the market Magnetic locking system ensures quiet stable storage Quickly and easily mounts in hollow crank spindle Compatible with hollow-spindle SRAM Shimano and Praxis cranks Includes 2.5 to 6mm allens a T25 Torx a valve core remover spare chain links and a spoke wrench Specifications Tools: 2.5 3 4 5 6mm Hex T25 Chain breaker Spare chain links storage Spoke wrench System: Compatible with Sram & Shimano & Praxis Cranks Sizes: 100x 32 x 19mm Colors: Matt Black Weight: 84g Material: High density plastic