Trail and Street tyre.The legendary (and patented) all surface performance tyre;now in a size that will be great for the Big Boy wheel users... (2.2" air chamber is especially good for those running without suspension).Now with a new Revised tread (with lowered rails).Utilises two central rails for reduced buzz on hard surfaces, but features drive 'sleepers' between the 'rails' to give traction on loose surfaces (Halo patented). Also features overlapping low profile studs to avoid lateral flex during hard cornering, and so provide positive steering.Multi use pressures allow this one tyre to perform in almost all conditions... both on road and off road.Built-in Puncture Protection System reduces flats.,Directional, universal front or rear tread. ,knurled ground contact points.,High quality skinwall carcass.,Built-in Puncture Protection System,Black.,Black/Skinwall.,Black/Whitewall.,29" x 2.2" (700 x 56C).,Approx Weight: 890g.
Fat Foot SprocketAvoid damaged freehubs with these precision CNC machined Cr-mo HG style sprockets with an offset 7mm wide foot to avoid digging into softer alloy HG type splined freehub bodiesCNC Cr-Mo sprocket 1/8" teeth.,7mm wide HG type spline foot.,Available in 12 to 20T sizes,Chrome Plated.
MX Hub Axle Bolts, Replacement Cro-Mo Hub bolts with Alloy Cap set for MXF/MXRC/MXRC-E BMX HubsCro-mo bolts with Alloy CapsMale boltsBlack, Gold or Red.
MX Hub Axle Bolts, Replacement Cro-Mo Hub bolts with Cro-Moly Washers set for MXF/MXR BMX HubsCro-mo bolts with Cro-Mo Washers.Male bolts.
Top quality screw-on Freewheels for the discerning single speed rider that wants super quick pick-up...High strength Cr-Mo body and cog.,CNC 3/32" Cr-Mo teeth (can accept 3/32 or 1/8" chains).,6 pawls system.,72 point pick-up.,1.37"x 24T Standard R/H threaded.,Body features "EZ-off" 4 dog tool removal slots. ,Black Oxide finished..SpecificationsMaterial Cr-Mo,Chain Compatibility 3/32,Threads 1.37 inch x 24 tpi,Colour Black,Weight 164g (16T), 172g (17T), 176g (18T).
1mm thick, high quality butyl rubber inner tubes with standard presta type valves.Suitable for most Fat bike tyre applications.SpecificationsCompound Butyl rubber,Size 26 x 4.0" (x1.0mm) - presta valve,Weight 530g.
Expert level BMX race tyre.Affordable folding tyre with anti puncture (good for race tracks where there may be the chance of punctures).Ideal for all normal racers who just need one tyre to use.Features:55D Rubber Compound.,60 Tpi,Kevlar folding bead.,1mm anti-puncture..Colours:Black Skinwall and option for White Skinwall..Sizes:20 x 1.60,20 x 1.75,20 x 1.95.Weights:20 x 1.60: Black 268g, Whitewall 295g.,20 x 1.75: Black 305g, Whitewall 310g.,20 x 1.95: Black 325g, Whitewall 345g.. Recommended inflation: Min 45psi - Max 75psi.
Short HG type Driver for Halo MXRC hubsSupa-Drive system, Alloy HG carrier with Cro-mo pawl and driver unit.Bush or bearing optionsTechnical InfomationThe lightweight bushed driver system was originally implemented into the MXRC hub to minimise the weight of the rear wheel for racing. However, several riders found the bush system was susceptible to excessive wear when compared to a bearing system, therefore, we have introduced the slightly heavier (15g) cartridge bearing freehub. The newer style complete cartridge bearing freehub is retro-compatible with the original MXRC rear hub with a bushed driver, but, due to the altered internal spacing of the sealed bearings, you MUST USE the specially shortened thread HG type lockring (supplied with the sealed bearing freehub).Caution: DO NOT USE a standard lockring on the newer sealed bearing freehub, as it will not clear the outer bearing.
Halo have developed a new family of BMX Racing tyres including these superlight MXR-SLR folding versions.Soft, grippy 55D rubber compound is specced in 20" x 1.60, 1.75 or 1.95 sizes.MXR-SLR tyre is a pure-bred BMX race tyre.Features:Fast rolling 120Tpi casing.,Soft, grippy 55D rubber Compound.,Superlight folding Kevlar bead..Colour: Black Skinwall..Sizes:20 x 1.60 ,20 x 1.75,20 x 1.95.Weights:20 x 1.60: 231g,20 x 1.75: 240g,20 x 1.95: 297g.Recommended inflation: Min 45psi - Max 75psi.
Precision CNC machined alloy axle nuts and washer sets in lots of bling bling colours..., Alloy axle nuts and washer sets in M9 or M10 (mm).Lots of bling colours.Precision CNC machined from 6061 Alloy.Red, Blue, Black, Gold or Purple anodised.Sold in pairs..
DJD Supa Drive DriverSize: 1/8",CNC Cr-mo,Fits Halo DJD SupaDrive Hub ONLY. ,Sprocket Not Included.
Special pads to suit Carbaura Carbon road rims3 types availableCampagnolo pre 2012 ,Campagnolo 2012 and onwards,Shimano.SpecificationsColour Grey.
The Hamax Rain Cover is specially designed for Hamax child bike seats. It fits snugly around the child bike seat, protecting it from rain and wind when it is not in use.
Extra bar for adjustmentDo you need to adjust the seat? It is possible to increase incline, reduce incline, lower the seat or adjustment for small frames with an extra bar. Available for Kiss, Sleepy, Smiley, Caress, Siesta and Zenith.
Natural springing and protects the child’s spineThe Kiss helps to make bike rides simple and safe when you go cycling with a child on board. The Hamax freely suspended fastening bracket gives natural springing and protects the child’s spine during the trip.Easily attached to the child!Adjustable safety harness and footrests!All Hamax child bike seats are designed to ‘grow’ with the child via an adjustable safety harness and footrests. The child bike seat may be easily attached to and removed from the bike. By purchasing an extra bracket, you may easily switch the child bike seat between two bikes. Hamax recommends that a child should always wear a helmet when using a child bike seat.FeaturesErgonomic sitting position,Safe and flexible belt system with belt buckles that cannot be opened by the child itself,Safe and simple to fit,May be fitted to bikes with or without luggage carriers,For children above the age of 9 months and weighing up to 22 kg,Adjustable safety harness and legrests,The child bike seat may be easily attached to and removed from the bike,A suspended fastening bracket ensures excellent cushioning,Fits frame tubes from 28-40 mm (round),The fastening system will not get caught up with cables in the fastening area,Approved: TÜV/GS EN14344 Approved ,Dimensions: 48x38, 5x70 cm/3.6 kg,Material: Polypropylene (PP), UV stabilised material.
Extra bar for adjustmentDo you need to adjust the seat? It is possible to increase incline, reduce incline, lower the seat or adjustment for small frames with an extra bar. Available for Kiss, Sleepy, Smiley, Caress, Siesta and Zenith.
gives natural springing and protects the child’s spineThe Smiley helps to make bike rides simple and safe when you go cycling with a child on board. The Hamax freely suspended fastening bracket gives natural springing and protects the child’s spine during the trip.Easy to secure the childThe extra chest buckle makes it easy to secure the child with one hand, while the bike is held steady with the other hand. The chest buckle prevents any conflict with the helmet when the child is being placed into or lifted out of the seat. The child bike seat may be easily attached to and removed from the bike. By purchasing an extra bracket, you may easily switch the child bike seat between two bikes.Wear a helmet!All Hamax child bike seats are designed to ‘grow’ with the child via an adjustable safety harness and footrests. Hamax recommends that a child should always wear a helmet when using a child bike seat.FeaturesErgonomic sitting position,3-point safety harness with extra chest bracket in order to secure the child in the seat in a safe and practical manner,The belt buckles cannot be opened by the child itself,Safe and simple to fit,May be fitted to bikes with or without luggage carriers,For children above the age of 9 months and weighing up to 22 kg,Adjustable safety harness and legrests,The child bike seat may be easily attached to and removed from the bike,A suspended fastening bracket ensures excellent cushioning,Fits frame tubes from 28-40 mm (round),The fastening system will not get caught up with cables in the fastening area,Approved: TÜV/GS EN14344 Approved ,Dimensions: 48x39x71 cm/4.3 kg,Material: Polypropylene (PP), UV stabilised material.
Extra bar for adjustmentDo you need to adjust the seat? It is possible to increase incline, reduce incline, lower the seat or adjustment for small frames with an extra bar. Available for Kiss, Sleepy, Smiley, Caress, Siesta and Zenith.