The Carbon Seatpost from Hope Technology is light but extremely strong making it suitable for most cycling disciplines. From cross country racing to downhill and road bikes, this UK manufactured seatpost is ready for anything. 100% designed, tested and manufactured in Barnoldswick, EnglandSmooth internal surface finish removes any unnecessary resin rich areas to minimise weightVarying wall sections to optimise weight and areas of high stress concentrationsSame ultra-fine seat rail adjustment as tried and proven on our previous Eternity Seatpost15mm layback / Weight: 27.2mm 185g, 30.9mm & 31.6 220gThese seatposts have been built using 24 individual piles of carbon with highly toughened epoxy resin system that delivers a safe, strong and rugged seatpost. The laminate comprises unidirectional T700 fibre which is the highest strength standard fibre available. This provides maximum tensile strength whilst keeping weight to a minimum. This is combined with strategically positioned plies of 3K twill woven fabric, adding hoop strength to resist clamping forces and mitigating failure mode in the event of serious crash damage. The 1K 2x2 twill weave fabric outer ply, also contributes in this respect together with a super smooth finish and striking visual aesthetic.
The Carbon Seatpost from Hope Technology is light but extremely strong making it suitable for most cycling disciplines. From cross country racing to downhill and road bikes, this UK manufactured seatpost is ready for anything. 100% designed, tested and manufactured in Barnoldswick, EnglandSmooth internal surface finish removes any unnecessary resin rich areas to minimise weightVarying wall sections to optimise weight and areas of high stress concentrationsSame ultra-fine seat rail adjustment as tried and proven on our previous Eternity Seatpost15mm layback / Weight: 27.2mm 185g, 30.9mm & 31.6 220gThese seatposts have been built using 24 individual piles of carbon with highly toughened epoxy resin system that delivers a safe, strong and rugged seatpost. The laminate comprises unidirectional T700 fibre which is the highest strength standard fibre available. This provides maximum tensile strength whilst keeping weight to a minimum. This is combined with strategically positioned plies of 3K twill woven fabric, adding hoop strength to resist clamping forces and mitigating failure mode in the event of serious crash damage. The 1K 2x2 twill weave fabric outer ply, also contributes in this respect together with a super smooth finish and striking visual aesthetic.
Speedplay Zero Stainless Road Bike PedalsWhether you’re an aspiring road racer or a seasoned endurance rider, you’ll love the support, comfort and ease of use that the Zero Stainless Road Bike Pedals offer you. The high comfort level they offer is thanks to their 0-15° of cleat float adjustment, which you can accurately adjust to suit your preference. With this amount of adjustability, you’ll be able to enjoy long rides with less knee discomfort, as your legs will be able to find their natural range of motion. Speedplay has also made these pedals to be lightweight yet also durable and strong, giving you mile after mile of smooth operation and efficient power transfer.Pedals with Dual-Sided EntryAnother invaluable feature is the dual-sided entry, which means you can just step down on the pedal and go. No more fumbling or looking down to get into the right position, as the cleat’s design and pedal’s shape ensure that you’ll engage quickly and safely without having to stop and think.Adjustable Foot Position and Float AmountUnlike traditional cleats, each of the essential foot positioning adjustments can be changed without affecting each other. The cleat's three-way adjustment ensures you can set up its front/rear and side-to-side positions individually and then choose how much float you want on the pedals. These unique adjustment settings significantly increase comfort and efficiency while dramatically reducing knee strain and fatigue.High-Grip Pedal Cleat CoversThese Zero pedals come with Speedplay's rubberised cleats, which make those off the bike periods less dangerous if your bike's mechanical problem forces an extended walk on the tarmac, or if you feel the need for a coffee stop.Features: Material: Body: Grivory; Spindle: Stainless-Steel Cleat Type: Look three-bolt road cleats Cleats Included: Yes Cleat Tension: Standard tension cleats included Axle Diameter: Standard 9/16" thread Bearing Type: Triple sealed cartridge and needle bearings Release Angle: Micro-adjustable from 0° to 7.5° Pedal Float: Adjustable from 0° to 15° Cleat Forward/backward Adjustability: Up to 13mm Cleat Left/Right Adjustability: Up to 8mm Walkable Cleats: Yes (adaptor included) Stack Height: 11.5mm (3 hole) 8.5mm (4 hole) Pedal Dimensions: 99x50x50mm / 3.9" x 2" x 2" (each) The Zero cleat positions your foot closer to the top of the spindle for improved power transfer The thin pedal profile of the Zero pedal lets you power through corners where your rivals coast - 39° The Zero cleat fits any shoe with a three-hole or four-hole mount Built-in grease port for easy bearing lubrication Walkable cleats included Phenomenally low weight Weight: 222g (pair)Technologies: Large, Stable Pedalling Platform: The Zero pedal system provides the same solid connection as conventional single-sided pedals, but with Speedplay's unique, inverted design the cleat provides the platform once the cleat is engaged Quality Without Compromise: Zero pedals use precision cartridge and needle bearings - three of them instead of the two that are found in most other pedals. This allows them to be thinner for a lower stack height, better cornering clearance and reduced aerodynamic drag. Like all Speedplay pedal systems, the locking edges of Zero pedals and cleats are metal-on-metal for durability and safety, unlike competitors who use engagement edges made of plastic True Locking Mechanism: The Zero's locking mechanism does not rely on spring tension for security, so entering and exiting Zero pedals is easy, but unintended release is virtually impossibleBuy Speedplay Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MQM stands for Moving Quickly Over Mountains, and this version of the Merrell MQM 3 Shoes doesn't disappoint. An upgraded design, the MQM 3 Leather Gore-Tex Shoes feature a rich suede upper and recycled detail, alongside the signature features the original is famous for. This includes a GORE-TEX® waterproof-breathable membrane for keeping feet dry and cool, an EVA foam insole for comfort, a protective Bellows tongue and toe cap, as well as the shock-absorbing Air Cushion and Super Rebound Compound. In addition, a moulded nylon arch shank and rock plate provide extra support. Finished with a Vibram® TC5+ rubber sole for a high level of traction.
Whether you’re riding singletrack mountain passes or gravel routes with the waterproof Seat-Pack QR you are ready for every bike adventure. With the innovative and patented Seat-Lock attachment system and abrasion-resistant nylon fabric the bag is super stable quickly mounted and just as quickly removed without leaving any residue. And with the help of a special adapter of just 4.3 centimeter in width this bag can even be used with a dropper post. The internal reinforcement and five compression straps ensure that the contents are packed tightly and securely. A valve with a handle strap helps to compress the pack volume and the elastic cord on the outside allows for the attachment of additional gear. To prevent damage from tire contact a protective plate is attached to the underside of the Seat-Pack QR which also doubles as a fender. OTHER PRACTICAL FEATURES: + Our reflector ensures added visibility and safety + A daisy chain allows for the attaching of a rear light COMPATIBILITY NOTICE YOU CAN EASILY CHECK IF YOUR SADDLE IS COMPATIBLE: 1. The saddle rails must have a bend of at least 34°. 2. The seat post clamp must be at least 13 mm from the middle of the bend in the saddle rail. There must also be at least 13 mm from the middle of the bend to where the rail connects to the back of the saddle. 3. The bottom edge of the saddle (at the side) must be at least 14 mm higher than the bottom edge of the saddle rail. *Please use image for refference* THE FOLLOWING PRODUCTS ARE NOT SUITABLE: + Saddles with carbon fiber rails or carbon fiber seatposts + Suspension seatposts + Saddles with unusual saddle rails e.g. SQLab Active Brooks B67 (see point 2 above) + Electronic dropper posts e.g. Rock Shox AXS or Magura Vyron If you still have problems mounting the Seat Pack QR for the first time try moving the Seat Lock System as far forward on the bag as possible and loosen the bolts to find a fitting position. This is the easiest position for initial mounting – you can then adjust the position for the best fit. The fitting instructions have further information and tips. COLOR black matt MATERIAL PS21R PS33 BAG TYPE single ADAPTER - INSTRUCTIONS Download DATASHEET Download WEIGHT 625 g | 22 oz HEIGHT 28 cm | 11 inch WIDTH 48 cm | 18.9 inch DEPTH 22 cm | 8.7 inch VOLUME 13 L | 793 cu.inch LOAD 4 kg | 8.8 lbs PROPERTIES mig nopvc ip64
Leatt DBX 3.5 Neck BraceThe DBX 3.5, from Leatt, is a super lightweight but ultra protective neck brace that has been independently tested and proven to reduce the risk of serious neck injury by 47%. The neck brace comes with a comfortable and adjustable design that ensures that the protector will fit the majority of body types. The brace comes with a push button open/closure for quick and easy access and is lined with washable, injection moulded padding with a specially ventilated design.Features47% reduction for risk of serious neck injuryPush button open/ closure systemCoreFlex split rear removable thoracic strutUltimate helmet rim striking platformSculptured, split front for improved comfort and fitCollarbone cut-outRobust, injection moulded paddingPadding can be washedVentilated ribbed body paddingComes with optional chest strapCE tested and certifiedMoulded PC shellPolyamide reinforced EPS constructionWeighs 499gBuy Leatt Protection from Chain Reaction Cycles. Ride. Eat. Sleep. Repeat.
Leatt DBX 3.5 Neck BraceThe DBX 3.5, from Leatt, is a super lightweight but ultra protective neck brace that has been independently tested and proven to reduce the risk of serious neck injury by 47%. The neck brace comes with a comfortable and adjustable design that ensures that the protector will fit the majority of body types. The brace comes with a push button open/closure for quick and easy access and is lined with washable, injection moulded padding with a specially ventilated design.Features47% reduction for risk of serious neck injuryPush button open/ closure systemCoreFlex split rear removable thoracic strutUltimate helmet rim striking platformSculptured, split front for improved comfort and fitCollarbone cut-outRobust, injection moulded paddingPadding can be washedVentilated ribbed body paddingComes with optional chest strapCE tested and certifiedMoulded PC shellPolyamide reinforced EPS constructionWeighs 499gBuy Leatt Protection from Chain Reaction Cycles. Ride. Eat. Sleep. Repeat.
Ultrahigh-performance bib shorts featuring aggressive aerodynamics and a defining, soft feel. Made of "Tattoo Effect" Fitter fabric for extra comfort. Finished with raw-cut bib braces, and for a pared-down design and a super-clean aesthetic. C3 multi density chamois with gel inserts. Idea for long, stylish rides. Key Features: Perfect fit: Fitter compression fabric with “Tattoo effect” internal anti-slip honeycomb gripper., Anti-shock protection: C3 chamois features protective shell and ergonomic 3D surface.,Extreme comfort: Seamless elastic braces with new rear crossover shape. .
La Sportiva’s TX2 Evo Leather Approach Shoes envelope your feet with a suede upper that provides a comfortable and snug fit. Great for use over a variety of terrains, the shoes are also engineered with La Sportiva’s Vibram® IdroGrip sole, which features integrated climbing zones, maximising grip on technical terrains. The TX2s provide a unique sole package, with a 100% resolable tread – doubling the shoe’s life cycle, while using recycled materials for a lower environmental impact. The sole package is designed for quick and easy resoling - exclusively at authorised La Sportiva resolers. Paying further respect to the environment, the TX2 shoes also features a metal-free eco-tanning upper, a Ortholite® Hybrid insole, made from recycled materials, a midsole constructed, in part, from processing scraps. The shoes also come with 100% recycled laces.
The Brand-X Ascend II is an externally routed dropper seatpost that offers excellent performance and reliability without breaking the bank. Tweak your saddle height for what lies ahead and tackle the trail in comfort.Externally Routed Dropper SeatpostBuilding on the success of the Ascend Dropper Seatpost, this aluminium dropper post is available for those who have a rig without internal cable routing: Brand-X is bringing affordable and reliable dropper posts to the people! With infinitely smooth adjustments and an ergonomic paddle style lever that can sit on the left or right of your cockpit, the Brand-X Ascend II Dropper Seatpost is the upgrade that your bike needs. To avoid cable movement/pull, this dropper seatpost's cable is actuated from the mid-cap and delivers consistent performance.Key Features:Material: T6-6061 Aluminium,Bar mounted paddle style remote lever and cable operated external routing,Linkage mechanism eliminates any outer cable pull,Zero offset, one-piece head/upper shaft with micro adjust clamping mechanism,Length: 400mm,Travel: 125mm (27.2mm = 105mm travel),Cable Length: 1.5m,Finish: Sand blasted and hard anodised,Warranty: 2 years,Weight: 610g (30.9mm) w/o cable and paddle shifter (90g),.Please Note: The 31.6 and 30.9 diameter options come with the 1x shifter style remote shown in the image, and are not suitable for use on bikes with 2X or 3X front gearing. Our current stock of the 27.2 diameter post comes with a 22.2 lever that is compatible with 2X or 3X front gearing.
Brand-X's Ascend Dropper Seatpost was so good they've decided to roll it out to the masses. The Ascend CX Dropper Seatpost is ideal for cyclocross, gravel, and road cyclists who feel the need to tweak their seatpost as they ride for customisable comfort.Smooth and Reliable Dropper SeatpostOperated easily via a paddle style remote on either side of your cockpit, the aluminium CX Dropper Seatpost is easily installed on bikes with internal cable routing. Cable actuated at the bottom of the dropper post via a linkage mechanism, the Brand-X dropper post eliminates cable pull/movement for a smooth and reliable performance.The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend CX Dropper Seatpost will carry on. Key Features:Material: T651-7075 Aluminium,Bar mounted paddle style remote lever and cable operated internal routing,Linkage mechanism eliminates any outer cable pull,Zero offset, one-piece head/upper shaft with micro adjust clamping mechanism,Only compatible with internally routed bikes,Length: 458mm,Travel: 150mm,Cable Length: 1.5m,Finish: Sand blasted and hard anodised,Warranty: 2 years,.
This carbon post is the go to conversion part to allow a change in body position on the bike to suit time trailing or triathlon riding effortsThe saddle is pushed further forward moving the centre over the bottom bracket in the same way as a steeper seat tube angle on a specific TT bikeA more powerful aerodynamic position can be achievedTraditional 73 degree seat tube angles are increased to 78 degrees with a physical move forward of up to 38 mmMulti-layer multi-directional carbon fibre weave to soak up road shock and deliver aerodynamicsForged 6061-T6 aluminium head construction for strength where it's needed27.2 mm diameter300 mm longWeight is just 210 grams