Castelli Superleggera Bib ShortsCastelli have always been pioneers of cycling shorts for very hot weather. The Castelli Superleggera Bib Shorts are their very latest development, pushing fabric technology further than ever to deliver the best in lightweight hot-weather performance.Scorching PerformanceCastelli have worked from the ground up, looking at new ways to make the Superleggera Bib Shorts as light as possible, highly breathable and yet maintaining durability. To this end, they start with a unique woven fabric rather than standard knit. It's some 50% lighter than usual cycling shorts fabric and yet offers excellent muscle support and non-transparency. The woven nature also allows Castelli to grade the weight seamlessly from the top to to the leg ends - the lower part of the leg weighs a mere 90 g/m² compared to the usual 220 g/m² of standard cycling shorts. This lack of weight contributes to more comfort as temperatures rise. The shorts also absorb less moisture for greater comfort and less on-the-bike weight. At just 114grams they're very light anyway but because they absorb 30% less moisture, they remain light even as you sweat. When you're heading uphill every little bit of weight saved counts. While being barely-there light the fabric is durable and abrasion-resistant against the saddle too - though something this light won't like you hitting the tarmac so ride safe and rubber side down. The bib section of the shorts is borrowed from the Free Aero Race 4 Bib shorts for perfect support, comfort and moisture management while stretch-woven grippers keep the shorts locked in place over the thighs.Progetto X2 Air Seamless Seat PadLet's look at the Progetto X2 Air Seamless seat pad in more detail and see just why it's so incredibly comfortable. The first contact point against the skin, the upper skin-care material, is now seamless and even softer than previous versions letting you enjoy smooth and chafe-free pedalling. The next layer, Castelli’s infinitely variable thickness padding, imparts just the right level of support where you need it, thicker under the sit bones and thinner on the sides and under the perineum - the result is intense comfort with reduced bulk. Lastly, to really push home superior comfort levels, perforated viscous padding is added under the highly sensitive ischial and perineum pressure areas, offering luxurious support when you're on the saddle for hours on end. Features:Materials: 71% Polyamide, 29% ElastaneGradient stretch woven fabric for minimal weight with optimum supportUltralight fabric to reduce weight by up to 50% while improving durabilityMinimalist stripe mesh bib to minimize weight and keep you coolIntegrated gripper elastic with exposed Lycra® to hold leg in placeEmbossed logos and stretch silicone scorpion heat transfersProgetto X2 Air Seamless seat padWeight: 141g (Large)Suggested Temperature range: 20 to 40 degrees CBuy Castelli Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
E Thirteen Helix 12 Speed Cassette ClusterBuilt for the demands of modern mountain biking, this model offers a highly durable and dependable build for tackling every obstacle that the trail throws at you. It's in e.thirteen's DNA to solve problems and that's why they created the Helix R 12 speed cassette cluster. It's available in several different finish options which feature a tough aluminium construction, as well as a nickel finish option that's exclusively made of steel.Future-Proof Your Bike with e*thirteen HelixThe Helix R 12 Speed Cassette is an upgrade to any SRAM Eagle or Shimano drivetrain, with more range than any other cassette on the market. The 9 tooth cog lets you step down one chainring size while keeping the same top-end gearing and provides not only better ground clearance, but an overall lighter drivetrain.Unlike SRAM Eagle, Helix R cassettes have replaceable gear clusters. That means ongoing service and replacement costs will be less than half that of SRAM cassettes. As an added bonus, Helix R 12 speed clusters are backward compatible with and can be used to upgrade your existing TRS+ 9-50 cassette.When installing the Helix R cassette, as with any cassette, e.thirteen recommends checking chain wear. If your chain shows 0.5% or more wear, you will significantly decrease the wear life of your new cassette. Installing a new chain with your new cluster is a much better and economical solution.The Intergalactic 42-50t cluster features PVD finishing that is twice as durable as anodised models.Please note: This product is a replacement cassette cluster and is available in different sizes. Please choose from the menu the option that matches your drivetrain.Features: Cluster Material: Aluminium (Except Nickel option which is Steel) Use: MTB Speed: 12 speed Ratio: Multiple options available to selectTechnologies: Compatibility: The Helix R 12-Speed Cassettes work flawlessly with Shimano and SRAM 12 speed drivetrains, despite the challenges in designing for the different cog spacing and chain behaviour. Performance: The improved performance of the Helix cassette features great Shimano 12 speed shifting performance and improved reliability of steel and aluminum assembly. The Intergalactic PVD finishing is twice as durable as anodised models. And it is 60g lighter. Cost Savings: The aluminium one-piece 42/50 tooth cluster is easily replaceable so riders can keep their steel cluster for multiple seasons and freshen up as needed without buying a whole new cassette. More Range: 556% more range. Durable and Serviceable: Helix R features replaceable gear clusters and intergalactic PVD finishing. Low Weight: Lighter than both XTR and XX1.Buy E Thirteen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ideal for summer camping adventures, the Nordisk Puk Plus4° Egg Large Sleeping Bag has been made with optimum comfort at its core. Offering great freedom of movement, it boasts an egg-shaped construction to ensure a great balance between insulation and space, making it perfect for those who do not like to feel too confined while sleeping. The shell is made from a durable lightweight ripstop Polyester, and the bag has a soft touch lining with Nordisk's own NorGuard S-PO 80 fibre filling. An internal chest pocket secures your small personal items and the full length two-way zipper with jam-guard allows you to use the sleeping bag fully open on a warm night. Finished with a wide contoured hood for extra warmth on cold nights.
Ideal for summer camping adventures, the Nordisk Puk Plus4° Egg Sleeping Bag has been made with optimum comfort at its core. Offering great freedom of movement, it boasts an egg-shaped construction to ensure a great balance between insulation and space, making it perfect for those who do not like to feel too confined while sleeping. The shell is made from a durable lightweight ripstop Polyester, and the bag has a soft touch lining with Nordisk's own NorGuard S-PO 80 fibre filling. An internal chest pocket secures your small personal items and the full length two-way zipper with jam-guard allows you to use the sleeping bag fully open on a warm night. Finished with a wide contoured hood for extra warmth on cold nights.
3T Superleggera Team HandlebarDespite its ultra-modern high-modular carbon fibre construction, the Superleggera Team Handlebar offers timeless good looks and classic round drops. The bar's traditional drop shape is favoured by pro racers and experienced traditionalists alike, as it offers smooth transitions between riding positions.Light and ComfortableShaving weight off your bike can have a significant difference to your performance on the road and as these bars weigh a mere 186g in the 42cm size, there’s nothing holding you back. Also, to ensure lasting comfort on longer rides and increased structural integrity, the centre section has a constant taper. This design improves the ergonomics for the hands in a range of different hand positions.Features: Material: High Modulus Carbon Clamp: 31.8mm Drop: 148mm Reach: 105mm Finish: Gloss black Weight: 186g (42cm)Buy 3T Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 280g per pair Spindle: Forged scm435 chromoly steel Body: cast stainless steel Wings: stamped stainless steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Special edition colours: Silver/Black You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). They come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). You may also like to run the pedals on your road / commuter bike. Buy a set of Quattro cleats (CRB-15289) to use on your road shoes. It makes pulling off from junctions a breeze as you have 4 points of entry to the pedals. As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
They'll Think You Bought It Just To Look GoodThis is the jersey that brings Castelli's fabric and construction engineering together in one of the most refined jerseys we've ever made. The goal with this jersey was to make it as light as possible without sacrificing transparency, sun protection and convenient features like a zippered key pocket. We've brought in a new fabric that we call Oltre, which roughly translates to beyond, and it really goes beyond what you normally find in a jersey, with the horizontal stripes giving great breathability and stretch while providing good support for the pockets.The jersey will do double duty in your wardrobe: It's the jersey to reach for on hot days or big climbing days in the mountains. But it's also the jersey you'll pull out when you just want to look good, thanks to the no-sew construction around the sleeves and hem and the close attention to detail in every stitch, seam and component. It's designed with a fit that is close to body but slightly more relaxed than our race jerseys.Key Features: The deluxe, impossibly lightweight performance jersey, Oltre 70g stripe mesh base fabric, Stretch woven pocket reinforcement, No-sew welded sleeve and waist trim, Floating pocket construction with 3 main pockets and zippered key pocket, YKK® zipper, Sublimated overprint Superleggera logo on back, 22°-40°C / 70°-104°F, Weight:111 g.
Classed by Deda as the lightest production stem used by professional riders, this road bike model offers excellent strength and reliability. It features a tough alloy construction which makes it more than capable of handling all the intensity that comes with competing in road cycling events. Deda has also gone the extra mile, by putting this version through a 3D forging and anodising process. This adds an extra layer of durability and corrosion resistance to this already rock-solid road bike stem. Lightweight Road Bike Stem Whether you're riding with your buddies after work or competing in a race, this road bike stem offers an impressive strength to weight ratio. It weighs in at only 115g, which means you won't have to worry about adding any unnecessary weight to your road bike. This makes it a perfect choice of upgrade for riders who want their road bike tightly locked together without feeling weighed down. Manufacturer Part Numbers: Polish on Black 130mm: DDS130BA Team 80mm: DDS80A Polish on Black 120mm: DDS120BA Polish on Black 100mm: DDS100BA Team 130mm: DDS130A Team: 110mm: DDS110A Polish on Black 90mm: DDS90BA Polish on Black 80mm: DDS80BA Team 90mm: DDS90A Team 140mm: DDS140A Polish on Black 140mm: DDS140BA Polish on Black 110mm: DDS110BA Team 120mm: DDS120A Team 100mm: DDS100A
The design for the original crank brothers pedal began out of frustration. The founders of crank brothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. A word on maintenance In order to keep your crank brothers pedals running smoothly, they recommend the following: clean pedals every 30 hours of ridingremove the pedal body from the spindle and wipe it clean of any dirty greaseapply fresh grease to the inside of the pedal before re-installing the spindle
crankbrothers Eggbeater 2 MTB PedalsThe Eggbeater 2 pedal is slightly lighter than its brother the Eggbeater 3. Features Crank Brother's exclusive, four-sided entry, mud shedding design, and weight saving minimalism.Features: Cast stainless body and spring with steel spindle add strength and stability without a weight penalty Low-profile design delivers a more powerful and efficient pedal stroke 6° of knee-saving float with a choice of a 15 or 20° release angle gives you a customized fit for the trail Delrin bushing inner and cartridge bearing outer Plastic end caps Brass cleat and mounting hardware included Weight: 272g/pair Buy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The search for the ultimate functional shape, stripped of any excess. New exclusive graphic design. The lightest production stem used by professional riders. Alloy 7050 3d forged aluminum stem with black titanium screws. Available in team and pob (polish on black) finish. Material - Alloy 7050 Screws - Titanium pvd black Angle - 82° Handlebar diameter - 31.7 mm Fork steerer - 1 1/8 (28.6mm) Drop - 36 mm Clamp Height - 100 mm, 110 mm, 120 mm, 130 mm, 140 mm, 80, 90 mm Weight(110m) - 115g Finish - Black anodized, polish on black Note - Recommended mounting with Deda Elementi carbon handlebars only
The 200 Sonebula Merino Leggings are constructed from a 200gm, 100% Merino wool jersey fabric that is not too heavy and not too light. The super soft Merino fibres help to regulate your body temperature in all outdoor conditions – keeping you warm, while preventing you from overheating. The flatlock seamlines and gusset have been specially adapted to optimise mobility – allowing you full freedom of movement in the great outdoors. Care Instructions Machine wash on a cold and gentle cycle. Wash with similar colours. Do not use softeners. Do not bleach. Do not tumble dry. Line dry in shade. Cool iron. Do not iron print. Do not iron decoration. Do not dry clean.