Socks designed for the hottest days in the saddle. The Superleggera T 18 Socks have a light mesh ankle and top of the foot helping any heat and moisture escape with ease, keeping you comfortable as you ascend those long gruelling climbs or step on the pedals to reach warp speed. The 200-needle construction provides extra stretch while a midfoot support band holds the socks in place. Meryl® Skinlife antimicrobial yarns with silver ions reduce odour and keep your feet feeling as fresh as these socks look!Key FeaturesMidfoot support band,Meryl® Skinlife yarns for freshness,200-needle construction for extra stretch,Lightest mesh ankle and top of the foot for hot weather comfort,.
Socks designed for the hottest days in the saddle. The Superleggera T 12 Socks have a light mesh ankle and top of the foot helping any heat and moisture escape with ease, keeping you comfortable as you ascend those long gruelling climbs or step on the pedals to reach warp speed. The 200-needle construction provides extra stretch while a midfoot support band holds the socks in place. Meryl® Skinlife antimicrobial yarns with silver ions reduce odour and keep your feet feeling fresh.Key Features:12cm cuff height,Midfoot support band,Meryl® Skinlife yarns for freshness,200-needle construction for extra stretch,Lightest mesh ankle and top of the foot for hot weather comfort.
Socks designed for the hottest days in the saddle. The Superleggera Women’s 12 Socks have a light mesh ankle and top of the foot helping any heat and moisture escape with ease, keeping you comfortable as you ascend those long gruelling climbs or step on the pedals to reach warp speed. The 200-needle construction provides extra stretch while a midfoot support band holds the socks in place. Meryl® Skinlife antimicrobial yarns with silver ions reduce odour and keep your feet feeling fresh.Key Features12cm cuff heightMidfoot support bandMeryl® Skinlife yarns for freshness200-needle construction for extra stretchLightest mesh ankle and top of the foot for hot weather comfort
The Castelli Gregge 15 Sock carries the batton from the highly aclaimed original Gregge Sock - Castelli have added 3 cm onto the cuff for even greater warmth and comfort. The foot-bed has also been improved giving it a thicker construction along its full length. This creates even more plushness and luxury off the bike and greater thermal insulation on it.Visually the Gregge now features brand new colours and a more symetrical stripe pattern which will still looks awesome on the bike and even better in the office.Up your sock game with some Gregge Socks this winter and have your Castelli unfair advantage running from your head down to your toes.Classic Castelli merino wool blend socks now in a new lengthKey Features:Merino wool blend socks,Full length and thicker foofbed for added warmth with carbon soled shoes,15 cm cuff,Sizes S-M / L-XL / 2 XL,Fabric - 65% Wool 30% Elastolefin (Olefin) 5% Polyamide (Nylon).
They'll Think You Bought It Just To Look GoodThis is the jersey that brings Castelli's fabric and construction engineering together in one of the most refined jerseys we've ever made. The goal with this jersey was to make it as light as possible without sacrificing transparency, sun protection and convenient features like a zippered key pocket. We've brought in a new fabric that we call Oltre, which roughly translates to beyond, and it really goes beyond what you normally find in a jersey, with the horizontal stripes giving great breathability and stretch while providing good support for the pockets.The jersey will do double duty in your wardrobe: It's the jersey to reach for on hot days or big climbing days in the mountains. But it's also the jersey you'll pull out when you just want to look good, thanks to the no-sew construction around the sleeves and hem and the close attention to detail in every stitch, seam and component. It's designed with a fit that is close to body but slightly more relaxed than our race jerseys.Key Features: The deluxe, impossibly lightweight performance jersey, Oltre 70g stripe mesh base fabric, Stretch woven pocket reinforcement, No-sew welded sleeve and waist trim, Floating pocket construction with 3 main pockets and zippered key pocket, YKK® zipper, Sublimated overprint Superleggera logo on back, 22°-40°C / 70°-104°F, Weight:111 g.
Cinelli Headset Top Cap With Bolt and PlugThis genuine Cinelli set comes with an aerospace-grade alloy cap plus a bolt and cap for a secure fitment. Features: Material: Aerospace-grade Aluminium Alloy Diameter: 32mm Compatibility: Standard M6 cap head bolt Stem Type: 1 1/8", threadless Buy Cinelli Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Craghoppers Women's Kiwi Pro Thermo Leggings are ideal for all kinds of everyday adventures. Made with a flattering high-waist cut and stretch fabric, they offer a great range of motion and comfort, while the water-repellent Ecoshield technology keeps you dry. SolarShield fabric technology also provides UPF40+ protection from harmful UV rays, and two pockets (one of which is zipped) allows you to keep valuables within easy reach. Plus, they have been made using some recycled material, thus reducing carbon emissions and landfill waste.
The Craghoppers Women's Kiwi Thermo Leggings are ideal for all kinds of everyday adventures. Made with a flattering high-waist cut and stretch fabric, they offer a great range of motion and comfort, while the water-repellent Ecoshield technology keeps you dry. SolarShield fabric technology also provides UPF40+ protection from harmful UV rays, and two pockets allow you to keep valuables within easy reach. Plus, approximately 30 bottles were recycled to make them, thus reducing carbon emissions and landfill waste.
The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 280g per pair Spindle: Forged scm435 chromoly steel Body: cast stainless steel Wings: stamped stainless steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Special edition colours: Silver/Black You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). They come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). You may also like to run the pedals on your road / commuter bike. Buy a set of Quattro cleats (CRB-15289) to use on your road shoes. It makes pulling off from junctions a breeze as you have 4 points of entry to the pedals. As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross. The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 2 years Weight: 286g per pair Spindle: Forged scm435 chromoly steel Body: stamped steel Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Silver/Black or Silver/Red As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross. The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 278g per pair Spindle: Forged scm435 chromoly steel Body: cast stainless steel Wings: cast stainless steel Spring: 300 series stainless steel Inner bearing: Needle Outer bearing: Cartridge Maximum rider weight: No restrictions Colours options: Silver/Blue or Silver/Red You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). They shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). You may also like to run the pedals on your road / commuter bike. Buy a set of Quattro cleats (CRB-15289) to use on your road shoes. It makes pulling off from junctions a breeze as you have 4 points of entry to the pedals. As with the rest of the crankbrothers range the pedals are fully serviceable with a level 3 / 11 service kit (product code CRB-11730). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Sleeves snap on to the next gen candy and eggbeaters to tighten the interface between the shoe and pedal. Includes: 1mm 2mm 3mm sleeves Compatible with candy and eggbeater 11 3 and 2