Foaming Chain Cleaner is a real innovation in bike maintenance. Utilising Fenwick’s cleaning superiority, chain cleaning has never been so easy. Fenwick's Foaming Chain Cleaner makes chain cleaning part of your bike wash routine, instead of a laborious 2nd job that never gets done. With its simple mess free application, there is very little waste as only 5 to 10ml of product is needed per clean and it is biodegradable too. Foaming Chain Cleaner does not use solvents or acids (citrus) to be effective, resulting in a safe product to use. To make the process even easier just use the Chain Cleaning Sponge to scrub the chain and the Gear Brush to agitate the cassette, jockey wheels and chainset. The cleaner is biodegradable and safe to use on anodising, carbon, plastics, rubber and painted surfaces. Directions for use: 1) Place the chain in middle gear for ease of use 2) Whilst turning the crank spray Foaming Chain Cleaner directly on to chain 3) Leave to soak for a couple of minutes – this can be done whilst you clean the rest of the bike with Fenwick’s BIKE CLEANER 4) For best results run the chain through the Fenwick’s CHAIN CLEANING SPONGE, specifically designed to agitate and, importantly, capture the chain dirt for a cleaner clean 5) Rinse thoroughly with clean water Top tip: As a water soluble degreaser Foaming Chain Cleaner can be used on delicate parts
Developed over many years using innovative raw materials, Fenwick's have formulated a unique chain lube. Its ability to run in all conditions at such high levels of performance are unsurpassed. This chain lube will perform in the dry and in the wet. Longevity and efficiency are the key features resulting in an extremely smooth running chain. Ideal for road and off-road where performance is paramount. High Performance + Silent Running + Extremely efficient Directions for use: 1) Twist top cap to regulate flow 2) Apply a drop of lube to each roller 3) Rotate chain for 20 seconds 4) Wipe off excess with clean cloth 5) Leave to cure for 3-4 hours before use Top tip: For best results ensure the Professional Chain Lube is between 8C and 20C and apply to a clean chain
Fenwick’s PTFE Anti-Seize grease, white in colour protects metals from corrosion and aids sealing and assembly. It stops metal parts becoming seized or frozen and is ideal for titanium to titanium interface combinations, as it helps prevent galling. Ideal for use on threaded and interference fit components. A thin smear may be added to the back of disc brake pads to help eliminate brake squeal, making sure to avoid the braking surfaces.
Fenwick's Concentrated Bike Cleaner is a complex mixture of surfactants and sequestrants. It may be diluted using 10 parts water to create a “ready to use” Bike Cleaner or used neat in chain baths. Concentrated Bike Cleaner works by attracting dirt, surrounding it and making it easy to rinse away. Fenwick’s Concentrated Bike Cleaner does not use solvents or acids (citrus) to be effective, resulting in a safe product to use. This simple concept works across all types of finishes, be it, matt, carbon or gloss, leaving a clean, contaminate free surface. The Concentrated Bike Cleaner is biodegradable and safe to use on anodising, carbon, plastics, rubber and painted surfaces. Directions for use as a Bike Cleaner 1) Using the fill level mark on a Fenwick’s spray bottle, dilute 1 part Concentrated Bike Cleaner to 10 parts water. 2) Spray bike thoroughly with the diluted mixture 3)Allow to soak in for a couple of minutes. 4) Agitate dirt with brush or sponge. 5) Rinse thoroughly with clean water. Directions for use as a Degreaser 1) Apply to drivetrain or parts that need degreasing – can be used in any chain bath and allow to soak in for a couple of minutes 2) Agitate with brush or sponge 3) Rinse thoroughly with clean water
It may not look much but if cleaned after every use, it will clean up chains time and time again. Step 1. Step 2. Step 3. Directions for use: 1) Apply Fenwick’s Foaming Chain Cleaner and allow to soak in 2) Insert chain into ‘V’ slot of sponge on the lower section of the chain 3) Holding sponge firmly in position, run the chain backwards through the sponge for 30 seconds 4) Rinse the chain thoroughly with clean water 5) Re-lube with any Fenwick’s chain lube 6) To clean the sponge, just apply some Fenwick's Foaming Chain CLeaner to the ‘V’ slot straight after use, rub it in and rinse thoroughly.
For ease of use, the Fenwick's Assembly Grease tube allows pin point accuracy without the need for a grease gun. You can rest assured that when using Fenwick's grease, it will be quietly working hard whilst you enjoy your ride. Fenwick’s Assembly Grease is a high-quality water resistant grease designed for the toughest conditions. It is specifically formulated to withstand water ingress due to its unique adhesive and cohesive properties. Inhibits corrosion and wear.
The primary use is fitting to bolt threads or bearings to prevent water ingression and seizing. The tube is easily stored and features a needlepoint applicator for accurate application.
This Cleaner is also multi-purpose, as it can even be used as a carbon paste to prevent seatposts slipping in carbon frames.
From the minute you start using FS-10, you’ll know that something is very different. Not only do the natural ingredients smell nice, but they also enhance the performance of FS-10.
The application of the paste stops slippage between mating surfaces, meaning you will need to apply less torque to bolts to gain the same level of security.
Fenwick's Disc Brake Cleaner’s triple solvent formula is designed to clean a wide range of contaminants. The product has been engineered to give a slightly slower evaporation time, thus allowing for a better, deeper clean, resulting in a dry, fully degreased finish. May improve braking performance and reduce brake squeal. Directions for use: 1) Initially, spray from a distance of 20cm to wet down the surface to be cleaned – use short blasts 2) Leave for 10 seconds 3) After surfaces have been wetted, blast away contaminants by moving the aerosol closer and using prolonged bursts. Catch residue with an absorbent cloth Top tip: If used as a chain degreaser re-lube using a Fenwick’s chain lube
The highly effective formula gest to work immediately and easily dissolves grease, oil and grime. A final blast of this Drivetrain Degreaser will wash away all contaminated residue, leaving only a light, corrosion-resistant protective coating. Fenwick’s Fast Blast is suitable for use on chains, gear mechanisms, cassettes, and chainsets.