Gravity RoyaltyKey Features:Model designator (SF): SelectWheel size: 27.5" BTravel (mm): 200mmDamper Type: Charger RCFork offset: 36mm / 46mm (27.5")Maxle included: Maxle StealthColor (FS): Diffusion BlackE-MTB Decal: NoSteerer: 1-1/8" AluminumAxle: BOOST™ 20x110mmAxle to Crown (mm): 581Brake type (FD): DiscCrown Material: Forged, 6061 T-6 aluminum, direct mount stem compatibleUpper crown type: ShortLower leg material: MagnesiumUpper Tube Finish: Fast BlackUpper tube type: 35mm straight wall aluminumDamper adjust: CrownDamping adjustments: Extl begin stroke rebnd, low speed compVolume reducer: 2 TokensSpring: DebonAirSpring rate: n/aMax Tire Diameter (mm): 770Max Tire Width (mm): 81Maximum Rotor Size: 220mmMinimum Rotor Size: 200mm
Seasucker Komodo Bike RackDesigned with road racers who drive convertibles and other small sports cars in mind, this solid aluminium bike holder is ideal for when carrying space is at a premium. Coming complete with components which support 9mm QR axles and 12mm thru axles, this is a stylish and innovative way to transport your bike to the starting line. Attaching to your vehicle via four super-strong vacuum cups, the Komodo provides a reliable, damage-free hold to both your bike and car. Features:Material: Solid, machined Aluminium Minimum Size: 18x12" Compatibility: Road bikes with 9mm QR hubs and 12mm thru-axle hubs Buy Seasucker Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Dorado Pro Suspension ForkThe legendary Dorado Pro is back and well-equipped to turn the suspension world upside down with many of Manitou's finest technologies. Developed specifically for the rigours of modern downhill riding, this model features high-quality 6000 series aluminium legs with a carbon outer and carbon upper tubes delivering a fantastic combination of stiffness, durability and low weight performance. Its updated stiffer chassis is also paired with a sealed version of the TPC+ damper and an improved Dorado Air Spring with IRT volume adjuster. These technologies combined into one ultimate platform provides more than enough tunability to satisfy any savvy suspension tuner while being so easy to adjust that every rider can dial in their fork with ease.Carbon Fibre and Inverted DesignAfter its debut 11 years ago, the Dorado Pro is once again dressed in carbon. In addition to looking amazing, the upper carbon tubes allow 238g in weight savings compared to alloy along with increased stiffness. Inverted forks provide an incredibly smooth and consistent feel due to the constant lubrication of the bushings and seals. Inverted forks also provide a major increase in fore-aft stiffness with much longer bushing overlap compared to traditional fork designs while maintaining torsional compliance which provides more control over rough trail sections.Dorado Air Spring and TSR Trail Side ReliefDorado Air spring systems contain a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. TSR Bleed Buttons allow excess pressure built up in the outer legs of the fork to be equalised with a simple press of the button located on the top cap.TPC+ Twin-Piston Cartridge DamperTPC+ is a velocity and position-dependent damping circuit that maintains light damping through small bumps when the fork is high in the travel. As the fork compresses deeper in the travel the secondary TPC+ circuit engages and increases the damping force for added support and bottom-out prevention. Additionally, an independent Hydraulic Bottom-out circuit further increases the damping force in the final 30mm of travel to soften deep travel events and prevent hard bottom out.Features: Outer Leg Material: Carbon Leg Material: 6000 Series Aluminium Leg Diameter: 37mm Use: Downhill Axle: 110x20mm Boost Thru Axle Steerer Diameter: 1 1/8" Straight Spring: Dorado Air with Infinite Rate Tune (IRT) Compression Damping: Sealed Cartridge TPC+ with Hydraulic Bottom Out (HBO) Rebound Damping: Sealed Cartridge TPC Crown: Forged Travel: 203mm Adjustments: Air, IRT, Rebound, HS, and LS Compression Offset: 47mm Flat Crown (27.5"); 57mm Drop Crown (29") Ride Height: 582mm (27.5"); 602mm (29") Brake Post Mount: 203mm (223 Max) Max Tyre Size: 67mm Extras: Threaded TSR Buttons Options: Fender (sold separately) E-Bike Compatible: No Weight: 2970gTechnologies: Carbon Fibre Legs and the 37mm Chassis: Result in the stiffest and lightest Dorado to date. The carbon pro chassis is 27% stiffer than the previous 36mm version and 238g lighter than the new 37mm Expert version. Inverted Design: Provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. Dorado Air Spring System: Contains a unique balancing valve that equalizes the positive and negative air chambers during the air fill process resulting in a consistent feel without any flat or dead spots. It also allows easy Travel Adjustability from 180 to 190 and 203mm without the need for any spare parts. IRT (Infinite Rate Tune): Allows for advanced spring tuning by independently adjusting air pressures in the beginning and end stroke. IRT technology creates a secondary positive air spring that affects only the middle to end stroke of the fork. This allows the main air spring to be set to lower pressures for improved small bump sensitivity while maintaining mid-stroke support and moderate to aggressive end-stroke ramp-up. Sealed TPC+: Is a velocity and position-dependent damping circuit that maintains light damping thru small bumps when the fork is high in its travel. As the fork compresses deeper in the travel the secondary TPC+ circuit engages and increased the damping force for added support and bottom-out prevention. Additionally, an independent Hydraulic Bottom-out circuit further increases the damping force in the final 30mm of travel to soften deep travel events and prevent hard bottom out. The new cartridge design with spring-backed IFP fully seals damper oil for the most consistent damping on long demanding DH runs. Spring-backed IFP has improved performance during extreme riding, unlike a bladder, an IFP pressurizes the oil at the initial stroke eliminating any cavitation for the most consistent damping. Fits Both 29" and 27.5" Wheels: Markings on the outer legs indicate the proper clamping point for ideal axle to crown measurements depending on wheel size. The fork legs can be used with both wheel sizes. Two Crown Options: Are available with this fork (select from the drop-down menu). The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. TSR Bleed buttons: Allow you to release excess pressures built up in the outer legs of your fork with a simple tap of the button. This keeps your fork smooth and supple all day long.Manufacturer's Part Numbers: 191-37419-A101 Black 27.5" Short Offset 191-37419-A201 Black 29" Long OffsetBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
If Leonard Smalls were to trade out his beefed-up Honda VT500 and pedal his way across the Arizona desert we have no doubt it’d be aboard the Unit. Burly. Steel. Hardcore. Mean. Mean? Sure. The Unit does not mess around. Its single-speed design and Cromoly frame make its simplicity shine and keep the moving parts long-lasting for those big excursions. Gear mounts on the fork legs and several options for mounting water bottles mean you won’t go without any of the necessary gear no matter where you’re traveling. FRAME MATERIAL Reynolds 520 Butted Cromoly SIZES S M L XL REAR SHOCK n/a FORK Kona Plus Fork 110mm spacing CRANKARMS Prowheel 12spd CHAINRINGS 32t B/B Prowheel 73mm PEDALS n/a CHAIN Shimano Deore 12spd CASSETTE Shimano Deore 10-51t 12spd CHAINGUIDE n/a F/D n/a R/D Shimano Deore SHIFTERS Shimano Deore 12spd BRAKE CALIPERS Shimano MT410 Hydraulic FRONT BRAKE ROTOR Shimano RT10 180mm (centerlock) REAR BRAKE ROTOR Shimano RT10 160mm (centerlock) BRAKE LEVERS Shimano MT410 Hydraulic HEADSET TH ZST No.10 HANDLEBAR Kona XC/BC Riser STEM Kona XC/BC SEATPOST Kona Thumb w/Offset 31.6mm SEAT CLAMP Kona Clamp GRIPS Kona Key Grip SADDLE WTB Volt FRONT HUB Formula 110x15mm (centerlock) REAR HUB Shimano 148x12mm (centerlock) SPOKES Stainless Black 14g RIMS WTB ST i30 2.0 TCS FRONT TIRE Maxxis Rekon TR 29x2.6' or WTB Ranger TCS 29x2.6' REAR TIRE Maxxis Rekon TR 29x2.6' or WTB Ranger TCS 29x2.6' PAINT COLOR Matte Bloodstone w/ Charcoal & Nimbus Decals EXTRAS n/a GEOMETRY SIZE S M L XL 1 STL 370 420 470 530 2 TTL 582 610 637 675 3 REACH 425 450 475 510 4 STACK 588 597 606 615 5 SO 695 731 768 810 6 HTA 68.0 68.0 68.0 68.0 7 HTL 110 120 130 140 8 STA 75.0 75.0 75.0 75.0 9 CSL 430 430 430 430 10 BBD 65 65 65 65 11 BBH 310 310 310 310 12 WB 1115 1144 1173 1211 13 FC 693 722 750 789 14 FL 470 470 470 470 15 OF 50 50 50 50
Completely redesigned for 2021, this World Cup weapon has its sights set on the top step. Equipped with an updated version of our award-winning GRIP2 damper, an updated EVOL air spring, and a host of other radical new performance-driven features, the all-new 40 is ready to attack the track with ferocity. FEATURES NEW graphics. ,NEW chassis. ,NEW arch design increases head tube clearance, allowing for reduced rake. ,NEW lower leg bleeders. ,NEW air/oil channels. ,Increase in performance and tunability, zero increase in weight. ,Updated GRIP2 damper now with dual VVC (Variable Valve Control) on HSC and HSR options. ,Matching 8-click HSC and HSR adjustment on Grip2 forks and X2 shocks. ,Updated EVOL air spring. .SPECIFICATION Damper: GRIP2 damper now with dual VVC (Variable Valve Control). ,Travel: 203mm. ,Offset Options:48mm.52mm. ,Wheel Size: 27.5" & 29". ,Axle: 20TA x 110mm. ,Steerer: 1.125. ,Upper leg finish: Genuine Kashima Coat..