Coming kitted out with a Super Light Steel (SLS) construction, this mountain bike (MTB) rear shock spring is lighter than titanium springs and more affordable. It's equipped with a proprietary surface treatment and stress relief process that removes residual stresses from the spring, allowing it to withstand higher stresses. Each spring is also optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. Compatible with Fox DHX2 and Van RC rear shocks from 2016 onwards. All SLS springs are orange and are marked with their spring rate in lbs/in (in 25lb increments) and the maximum travel of the shock that they are designed to be paired with. Please note: This model is intended for Fox DHX2 and Van RC rear shocks from 2016 onwards. If you have a rear shock that's from before 2016, an SLS spring retainer is required (available separately). Manufacturer's Part Numbers: 033-22-046 Orange 375lb 033-22-047 Orange 400lb 033-22-048 Orange 425lb 033-22-049 Orange 450lb 033-22-050 Orange 475lb 033-22-051 Orange 500lb 033-22-063 Orange 525lb 033-22-052 Orange 550lb
This mountain bike (MTB) rear shock spring features a Super Light Steel (SLS) construction, which is lighter than titanium springs and more affordable. It's equipped with a proprietary surface treatment and stress relief process that removes residual stresses from the spring, allowing it to withstand higher stresses. Each spring is also optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. Compatible with Fox DHX2 and Van RC rear shocks from 2016 onwards. All SLS springs are orange and are marked with their spring rate in lbs/in (in 25lb increments) and the maximum travel of the shock that they are designed to be paired with. Please note: This model is intended for Fox DHX2 and Van RC rear shocks from 2016 onwards. If you have a rear shock that's from before 2016, an SLS spring retainer is required (available separately). Manufacturer's Part Numbers: 033-22-007 Orange 475lb 033-22-008 Orange 500lb 033-22-009 Orange 550lb 033-22-010 Orange 600lb 033-22-002 Orange 350lb 033-22-003 Orange 375lb 033-22-004 Orange 400lb 033-22-005 Orange 425lb 033-22-006 Orange 450lb
Ready to conquer every trail-riding adventure, this mountain bike (MTB) rear shock spring features a hard-wearing steel construction for excellent strength and durability on your ride. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired with shocks having less travel than the travel marked on the spring itself. Manufacturer's Part Numbers: 039-03-019 Black 650lb 1.385x4.954" 039-03-100 Black 700lb 1.375x5.200" 039-03-101 Black 800lb 1.375x5.280"
Part of the brand's renowned Factory Series, this mountain bike (MTB) rear shock is engineered for maximum rear-end suspension performance on the most demanding of trail conditions. It features a wide range of adjustment features including an independent two-position Open/Firm lever, which allows you to easily dial-in your ideal settings to match your riding style as well as the terrain. Fox Suspension has also kitted out this model with 16 clicks of Low Speed Rebound and 11 clicks of Low Speed Compression, so you can benefit from a more rider-tuned feel with high-performance damping wherever your ride takes you. Coming complete with a genuine Kashima coating, this high-quality Factory Series version delivers enhanced lubrication and a harder wearing surface, which results in increased shock smoothness and sensitivity on the trails. Heavyweight Features in a Lightweight Package Designed specifically to meet the demands of aggressive trail riders, the Float X combines sophisticated damping and fade-free performance with incredible light weight and outstanding structural integrity. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. - Updated chassis and damper. - High-flow main piston. - Air seal package. - Volume spacers with smaller increments. - MCU bottom out bumper. - Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. - Independent firm mode circuit – Clockable 2 position adjuster. - Increased rebound adjuster range (over DPX2). - Optimized reservoir lengths per shock size. - Hydraulic top out feature. - Reduced damper noise. - Larger air sleeve bore reduces average rider pressure by 40 psi vs. DPX2. - Bearing hardware compatible both sides. - Air valve location offers improved frame fitment and pump access. Manufacturer's Part Numbers: 979-01-053 230 x 65mm Metric 979-01-054 185 x 52.5mm Trunnion 979-01-056 185 x 55mm Trunnion 979-01-058 205 x 60mm Trunnion 979-01-059 205 x 62.5mm Trunnion 979-01-041 190 x 45mm Metric 979-01-043 210 x 50mm Metric 979-01-045 210 x 52.5mm Metric 979-01-047 210 x 55mm Metric 979-01-049 230 x 57.5mm Metric 979-01-051 230 x 60mm Metric
Part of the Performance Elite series, this high-quality dropper seatpost is equipped with a black anodised upper coating that provides an additional level of protection against wear and corrosion wherever your adventure takes you. Fox Suspension has also kitted it out with a powdercoat lower coating that allows it to handle all of challenges associated with all-day epics on your favourite trails and day-long adventures on your gravel bike. Also benefitting from internal cable routing, this versatile model provides a sleek look on your ride while also minimising any risk of damage from dirt or debris. Super Light Done Right Meet the Transfer SL. At 128 grams (25%) lighter than the regular Transfer post, Fox Suspension has branded it as the lightest mainstream dropper post on the market. Period. With lever options for flat bars, drop bars, and 1x and 2x drivetrains it (finally) brings the word “shred” into the super-lightweight cross country (XC) and gravel conversation. Performance Elite Series Dropper Seatpost Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, patent-pending head design and proven internals as the Factory Series but they feature a black anodised upper instead of a genuine Kashima coating. This Performance Elite series model's anodised upper is ideal for riders who want increased strength and durability on their ride, while also benefitting from its lightweight and responsive actuation. Technologies: - Updated lightweight design. - Updated Windows in lower post allow cable clamp/slack to be pulled from post side for compatibility with GRX-style dropper levers and minimises extra cable housing length. - 2-position mechanical post that locks at the top and bottom only. - Longer travel configurations offer exposed length of 290mm for taller riders. - Shorter travel configurations offer shorter total length for smaller riders. - Coil spring for consistent return performance. - Internal routing only. - 27.2, 30.9 and 31.6mm diameter options to choose from. - 50, 70, 75, and 100mm drop options to choose from. - 70-85deg seat angles are supported. - 7mm and 7x9 saddle rails supported. - 1x lever is Matchmaker, Shimano GRX, and I-SPEC EV compatible (levers available separately). Manufacturer's Part Numbers: 925-01-203 350mm 27.2 x 50mm 925-01-202 370mm 27.2 x 70mm 925-01-210 355mm 30.9 x 75mm 925-01-208 380mm 30.9 x 100mm 925-01-211 355mm 31.6 x 75mm 925-01-209 380mm 31.6 x 100mm
Featuring a lightweight EVOL air spring, this mountain bike (MTB) rear shock offers fantastic responsiveness and sensitivity as you charge through the more demanding of terrain conditions. Fox Suspension has also equipped it with a Dual Piston valve design that improves both rebound and compression flow for a smoother ride. Part of the renowned Factory Series, this version has a genuine Kashima coating on its body and air sleeve, which offers enhanced lubrication and a harder wearing surface, resulting in increased shock smoothness and sensitivity on the trails. Factory Series MTB Rear Shock with DPS Damper Ready for wherever your next trail-riding adventure takes you, this MTB rear shock comes kitted out with a DPS damper to keep your ride under control. Its damper features three positions of adjustment, where you can choose from Open, Medium and Firm modes to tailor how you want it to respond to the terrain conditions. Fox Suspension has also equipped it with an Open mode adjust tuning range (1, 2, 3) as well as adjustable rebound and air spring pressure. This gives you everything you need to dial-in your ideal settings for rear suspension performance that matches your riding style as well as the terrain. Exceptional Bump Compliance Meets Exceptional Efficiency With a lightweight chassis, EVOL air spring, and dual piston damper with 3-position switch, the Fox Suspension Float DPS Factory Shock SV creates a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. DPS damper with three positions - Open, Medium, Firm modes. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-475 Black 7.875 x 2.0" 972-01-476 Black 7.875 x 2.25" 972-01-474 Black 7.5 x 2.0"
This mountain bike (MTB) rear shock features a lightweight EVOL air spring, which offers fantastic responsiveness and sensitivity as you charge through the more demanding of terrain conditions. Fox Suspension has also equipped it with a Dual Piston valve design that improves both rebound and compression flow for a smoother ride. Part of the renowned Factory Series, this version has a genuine Kashima coating on its body and air sleeve, which offers enhanced lubrication and a harder wearing surface, resulting in increased shock smoothness and sensitivity on the trails. Factory Series MTB Rear Shock with DPS Damper Ready for wherever your next trail-riding adventure takes you, this MTB rear shock comes kitted out with a DPS damper to keep your ride under control. Its damper features three positions of adjustment, where you can choose from Open, Medium and Firm modes to tailor how you want it to respond to the terrain conditions. Fox Suspension has also equipped it with an Open mode adjust tuning range (1, 2, 3) as well as adjustable rebound and air spring pressure. This gives you everything you need to dial-in your ideal settings for rear suspension performance that matches your riding style as well as the terrain. Exceptional Bump Compliance Meets Exceptional Efficiency With a lightweight chassis, EVOL air spring, and dual piston damper with 3-position switch, the Fox Suspension Float DPS Factory Shock SV creates a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. DPS damper with three positions - Open, Medium, Firm modes. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-497 Black 6.5 x 1.5" 972-01-498 Black 7.25 x 1.75" 972-01-477 Black 7.875 x 2.0"
This trail-ready rear shock is well-equipped for the most demanding of terrain conditions. Part of Fox Suspension's prestigious Factory Series, this model is kitted out with proven technologies and is designed to exceed the demands of Factory-level riders. Adjustable Coil Spring Rear Shock Benefitting from Fox Suspension's finest technologies for modern mountain bike riding, this rear shock is equipped with a high-quality coil spring ready design and an updated damper. The updated X2 damper maintains a twin-tube architecture, employing a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension also added its patented Variable Valve Control (VVC) technology to the high-speed rebound (HSR) circuit, which allows for easy, external fine-tuning of your suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on high-speed compression (HSC) and high-speed rebound (HSR). This allows you to make consistent adjustments between their front and rear suspension. Nothing sticks to the ground quite like a coil shock. With an entirely updated chassis and damper, enhanced tunability, smoother action, and a MCU bumper for progressivity and end-stroke control - the Fox Suspension DHX2 Factory 2Pos-Adj Shock is ready to race straight out of the gate. Please note: A coil spring is not included with this model but is available to purchase separately. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated Chassis: The outer body on the DHX2 features steel construction with finned inner tubes for reduced hysteresis. DHX2 features an updated low-friction hard chrome coating on the shaft with new seals designed to pair perfectly to the new shaft coating, reducing frictions and increasing seal life. Updated Damper: The updated X2 damper maintains a twin-tube architecture, employing a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension added its patented VVC technology to the HSR circuit. VVC is a proprietary variable valve technology that allows for easy, external fine-tuning of suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on HSC and HSR. This allows the rider to make consistent adjustments between front and rear suspension. MCU Bumper: The updated MCU bumper is designed to allow for supple beginning and mid-stroke, seamlessly transitioning to a bottomless end-stroke. Independent Firm Mode Circuit: This version's 2-position switch operates on an independent circuit, resulting in a firmer lockout. Revised Spring Changes: The coil-sprung DHX2 now uses a full spring collar, held in place with a C-clip, and a new preload collar with indexed notches to allow for light preload without the collar backing off. Manufacturer's Part Numbers: 978-01-054 Black 8.5 x 2.5" 978-01-053 Black 7.875 x 2.0"
Engineered for riders who want to go big, this Fox Float Factory mountain bike (MTB) suspension fork is part of Fox Suspension's renowned Factory Series and comes feature-packed to exceed the demands of Factory-level riders. Ready for fast enduro rides with a design that's built for speed, this model's genuine Kashima coating on its upper tubes makes it slippery smooth and ultra-durable as you conquer the most demanding of trail conditions. Boost Hub Spacing Thanks to its Boost axle spacing, the Fox Float suspension forks provide stronger and stiffer performance, while its Float EVOL air spring and GRIP2 damper with dual Variable Valve Control (VVC) make it easy to tweak it to match your riding style. Packing the same revolutionary features as the 36 model, while redefining what you think a long travel single crown fork is capable of, this enduro fork sets a new benchmark for confidence, performance, and durability. Welcome to the big time. Enduro Fork with GRIP2 Damper Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork. Float EVOL Air Spring EVOL technology increases negative air spring volume, optimizing small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38’s elliptical steer tube is one of many ways Fox Suspension has further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it’s not. Manufacturer's Part Numbers: 910-21-031 Black 27.5" QR110 170mm 44mm 910-21-028 Black 27.5" QR110 180mm 44mm 910-21-027 Black 27.5" QR110 180mm 37mm 910-20-201 Orange 27.5" QR110 170mm 44mm 910-21-025 Black 29" QR110 160mm 51mm 910-21-020 Black 29" QR110 180mm 44mm 910-21-024 Black 29" QR110 160mm 44mm 910-21-022 Black 29" QR110 170mm 44mm 910-20-200 Orange 29" QR110 170mm 44mm
Packing the same revolutionary features as the 36 model while redefining what you think a long travel single crown fork is capable of, this enduro fork sets a new benchmark for confidence, performance, and durability. Part of Fox Suspension's Performance Series, it features a high-quality anodised finish on its upper tubes for extra durability as well as protection against corrosion during wet riding conditions. Another highlight is it comes equipped with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability. This makes it simple to dial in your favourite settings, so your suspension matches your riding style as well as the terrain conditions. Also benefitting from Boost axle spacing for increased stiffness and strength, plus many of the brand's finest technologies, this model is ready for hard-hitting enduro rides. Enduro Fork with Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately), which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. FIT GRIP Damper Inspired from moto, the GRIP damper uses Fox Suspensions FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38’s elliptical steer tube is one of many ways we’ve further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it’s not. - 58mm crown diameter to match modern frame shape profiles. - Optional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris (available separately). - 31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than the 36 model. Manufacturer's Part Numbers: 910-21-029 Black 27.5" QR110 170mm 44mm 910-21-021 Black 29" QR110 170mm 44mm
Engineered for handling the intensity of enduro racing, this high-quality suspension fork is part of the distinguished Performance Elite series which includes the same adjustments, features, dampers, weight, and 7000 series aluminium upper tubes as Factory Series. The difference is this model's upper tubes feature a hard-wearing anodised finish, which offers fantastic protection against corrosion during wet riding conditions. Fox Suspension has also kitted out this version with Boost axle spacing, making it ideal for modern enduro racing as it delivers additional stiffness as you dominate your way from the top of the mountain to the bottom. To top it off, it comes complete with a lightweight Float EVOL air spring and a GRIP2 damper with dual Variable Valve Control (VVC) for a wide range of tuneability. Packing the same revolutionary feature set as the 36 model, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time. GRIP2 Damper with Dual Variable Valve Control (VVC) Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork. Enduro Fork with Float EVOL Air Spring EVOL technology increases negative air spring volume, optimizing small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. Technologies: Performance Elite Series: Performance Elite forks retain the same adjustments, features, dampers, weight, and 7000 series aluminum upper tubes as Factory Series, but have black anodized stanchions instead of Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever-operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38’s elliptical steer tube is one of many ways we’ve further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it’s not. Manufacturer's Part Numbers: 910-21-030 Black 27.5" QR110 170mm 44mm 910-21-023 Black 29" QR110 170mm 44mm
This MTB fork features a Float EVOL air spring and a FIT GRIP damper with three positions of adjustment, so you can set it up to perfectly match your riding style as well as the terrain. Fox Suspension has also equipped this model with a lightweight yet robust chassis for a superior strength to weight ratio. Item Top Features Continued: Travel: 140mm Remote Operated: No Lever Operated: Yes Lockout: No Part Numbers: 29", 51mm Offset: 910-20-968; 27.5", 44mm Offset: 910-20-987; 29", 44mm Offset: 910-20-969