Nukeproof Dissent 275 Alloy Frame - GreyThis full suspension mountain bike (MTB) frame is well-equipped for fast and intense trail riding, thanks to its high-quality aluminium build that's specifically developed for the most demanding of rides. Designed for maximum strength and durability as you carve your way around the mountain, Nukeproof has also put this model through a hydroforming and triple-butting process. In addition, it is kitted out with a RockShox Super Deluxe Coil Ultimate DH RC rear shock that provides smooth and consistent rear end suspension performance as you charge from trail to trail. Another highlight is its comfortable geometry that includes internal cable routing for a clean, sleek finish.“It makes me want to race some World Cups again (Sam Hill)".Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world's fastest racers.The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were:- Simplify the design, to drop the weight and increase the front triangle stiffness.- More progressive leverage rate to increase the mid stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride.Structurally the most obvious change is an all-new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent's rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time.Trail-Ready Full Suspension Alloy MTB FrameThe suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse.The Dissent platform was originally conceived by Nukeproof's engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, the brand created something much better than expected, and the prototype won on its international debut at Crankworx festival's Garbanzo Downhill race with Sam Hill.It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent frame now offers riders the choice of four main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate.The main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider!Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you're riding, your height or riding style.The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157mm x 12mm rear axle to keep things stable at the rear.Features: Material: Nukeproof Dissent 275 Alloy, hydroformed 6061 triple-butted Aluminium, 200mm travel Use: Mountain Bike (MTB) frame Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (S=300LBS/M=350LBS/L=400LBS /XL=450LBS SPRING) Size Options: S/M/L/XL Fork Travel: 200mm Axle to Crown: 581mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured Standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm Bottom Bracket: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing Three-stage Dissent linkage Four-position adjustable linkage progression chip system Three-position adjustable chainstay length Enduro bearings Weight: 5.03kgs/11lbsBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Dissent 297 Alloy Frame - GreyFeaturing a robust 6061 aluminium build, this full-suspension mountain bike (MTB) frame has been put through a hydroforming and triple-butting process for exceptional strength, durability and toughness as you attack the trails. Engineered for riders who want to complete their mullet bike setup, this version also allows for a 29" front wheel and a 27.5" rear wheel to be fitted. Another highlight is its 157x12mm rear hub Boost axle spacing, which delivers stiff and responsive handling on the most demanding of terrain conditions.“It makes me want to race some World Cups again (Sam Hill)".Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world's fastest racers. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were:- Simplify the design, to drop the weight and increase the front triangle stiffness.- More progressive leverage rate to increase the mid-stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride.Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent's rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time.Lightweight Full Suspension MTB Frame with 200mm TravelThe suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse.The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival's Garbanzo Downhill race with Sam Hill.It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent Frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate.The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider!Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you're riding, your height or riding style.The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157x12mm rear axle to keep things stable at the rear.Features: Material: Hydroformed 6061 Triple-Butted Aluminium Use: Mountain Bike (MTB) frame Size Options: M/L/XL Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (M=350LBS/L=400LBS /XL=450LBS SPRING) Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm Bottom Bracket: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Three-stage Dissent linkage Four position adjustable linkage progression chip system Three position adjustable chainstay length Weight: 5.06kgs/11.1lbsBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Dissent 297 Alloy Frame - GreyFeaturing a robust 6061 aluminium build, this full-suspension mountain bike (MTB) frame has been put through a hydroforming and triple-butting process for exceptional strength, durability and toughness as you attack the trails. Engineered for riders who want to complete their mullet bike setup, this version also allows for a 29" front wheel and a 27.5" rear wheel to be fitted. Another highlight is its 157x12mm rear hub Boost axle spacing, which delivers stiff and responsive handling on the most demanding of terrain conditions.“It makes me want to race some World Cups again (Sam Hill)".Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world's fastest racers. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were:- Simplify the design, to drop the weight and increase the front triangle stiffness.- More progressive leverage rate to increase the mid-stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride.Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent's rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time.Lightweight Full Suspension MTB Frame with 200mm TravelThe suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse.The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival's Garbanzo Downhill race with Sam Hill.It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent Frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate.The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider!Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you're riding, your height or riding style.The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157x12mm rear axle to keep things stable at the rear.Features: Material: Hydroformed 6061 Triple-Butted Aluminium Use: Mountain Bike (MTB) frame Size Options: M/L/XL Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (M=350LBS/L=400LBS /XL=450LBS SPRING) Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm Bottom Bracket: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Three-stage Dissent linkage Four position adjustable linkage progression chip system Three position adjustable chainstay length Weight: 5.06kgs/11.1lbsBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Well-equipped for fast and intense trail riding, this full suspension mountain bike (MTB) frame features a high-quality aluminium build that's specifically developed for the most demanding of rides. Nukeproof has put this model through a hydroforming and triple-butting process to ensure maximum strength and durability as you carve your way around the mountain. In addition, it is kitted out with a RockShox Super Deluxe Coil Ultimate DH RC rear shock that provides smooth and consistent rear end suspension performance as you charge from trail to trail. Another highlight is its comfortable geometry that includes internal cable routing for a clean, sleek finish. “It makes me want to race some World Cups again (Sam Hill)". Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world’s fastest racers. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were: - Simplify the design, to drop the weight and increase the front triangle stiffness. - More progressive leverage rate to increase the mid stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride. Structurally the most obvious change is an all-new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent’s rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time. Trail-Ready Full Suspension Alloy MTB Frame The suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse. The Dissent platform was originally conceived by Nukeproof's engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, the brand created something much better than expected, and the prototype won on its international debut at Crankworx festival’s Garbanzo Downhill race with Sam Hill. It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent frame now offers riders the choice of four main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate. The main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider! Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you’re riding, your height or riding style. The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157mm x 12mm rear axle to keep things stable at the rear. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Size Options: S/M/L/XL Fork Travel: 200mm Axle to Crown: 581mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm BB: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Dissent 275 Alloy, 200mm Travel Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (S=300LBS/M=350LBS/L=400LBS /XL=450LBS SPRING) Headset: Nukeproof, 49IITS Custom-tuned rear shock configuration Internal cable routing Enduro Bearings Threaded 83mm BB Boost 157mm rear axle spacing 3D contoured frame protection Three-stage Dissent linkage Four-position adjustable linkage progression chip system Three-position adjustable chainstay length Weight: 5.03kgs/11lbs
“It makes me want to race some World Cups again (Sam Hill)". Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world’s fastest racers. This full-suspension mountain bike (MTB) frame comes equipped with a robust 6061 aluminium construction that's been put through a hydroforming and triple-butting process for exceptional strength, durability and toughness as you hit your favourite trails. Specifically developed for riders who want to complete their mullet bike setup, this model also allows for a 29" front wheel and a 27.5" rear wheel to be fitted. Another benefit is its 157x12mm rear hub Boost axle spacing, which gives you stiff and responsive handling, wherever your next ride takes you. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were: - Simplify the design, to drop the weight and increase the front triangle stiffness. - More progressive leverage rate to increase the mid-stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride. Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent’s rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time. Lightweight Full Suspension MTB Frame with 200mm Travel The suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse. The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival’s Garbanzo Downhill race with Sam Hill. It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent Frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate. The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider! Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you’re riding, your height or riding style. The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157x12mm rear axle to keep things stable at the rear. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Size Options: M/L/XL Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm BB: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Dissent 297 Alloy, 200mm Travel Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (M=350LBS/L=400LBS /XL=450LBS SPRING) Headset: Nukeproof, 49IITS Custom-tuned rear shock configuration Internal cable routing Enduro Bearings Threaded 83mm BB Boost 157mm rear axle spacing 3D contoured frame protection Three-stage Dissent linkage 4 position adjustable linkage progression chip system 3 Position adjustable chainstay length Weight: 5.06kgs/11.1lbs
The stepping-stone into the world of electric bikes. The Array is Raleigh's elegant electric bike option, combining good looks and modern tech, all in an affordable package. Suntour Canbus 400WH battery60 mile battery rangeSuntour Canbus OLED display3 assist levels7 speed Shimano SL-M315 STI shifterTektro mechanical disc brakesAdjustable aluminium handlebar stemErgonomic brown comfort gripsWhizzing through the weekday commute or tackling longer trips on the weekend. The Array is ready for it all, and with a 60-mile range it's ready to go again, and again, and again. Whether you want to rediscover the joy of cycling or just want a little extra push on the Monday morning rush to work, the Array is here to help. A lightweight aluminium frame, smooth Suntour suspension fork, and disk brakes mean your ride can be fun, comfy and reliable - at a realistic e-bike price too.Suntour Motor - The super-quiet and discreet Suntour motor delivers all the oomph you need. With 4 power levels available you can choose the assistance delivered on the fly. Make it a workout or a leisurely pootle, the power is in your hands.400WH Battery - Boasting a range of 60 miles on a single charge depending on level of assistance selected. The journey s just beginning.Suntour Control Panel - The new OLED Suntour control panel shows all the stats you could ever need, in a super clean and easy to read display. Easily flick between the three different assistance modes at the push of a button on the handlebar.Size Chart:
The stepping-stone into the world of electric bikes. The Array is Raleigh's elegant electric bike option, combining good looks and modern tech, all in an affordable package. Suntour Canbus 400WH battery60 mile battery rangeSuntour Canbus OLED display3 assist levels7 speed Shimano SL-M315 STI shifterTektro mechanical disc brakesAdjustable aluminium handlebar stemErgonomic brown comfort gripsWhizzing through the weekday commute or tackling longer trips on the weekend. The Array is ready for it all, and with a 60-mile range it's ready to go again, and again, and again. Whether you want to rediscover the joy of cycling or just want a little extra push on the Monday morning rush to work, the Array is here to help. A lightweight aluminium frame, smooth Suntour suspension fork, and disk brakes mean your ride can be fun, comfy and reliable - at a realistic e-bike price too.Suntour Motor - The super-quiet and discreet Suntour motor delivers all the oomph you need. With 4 power levels available you can choose the assistance delivered on the fly. Make it a workout or a leisurely pootle, the power is in your hands.400WH Battery - Boasting a range of 60 miles on a single charge depending on level of assistance selected. The journey s just beginning.Suntour Control Panel - The new OLED Suntour control panel shows all the stats you could ever need, in a super clean and easy to read display. Easily flick between the three different assistance modes at the push of a button on the handlebar.Size Chart:
A MODERN CLASSICThe Endurance 725 Disc complements the traditional looks of the Reynolds steel frame with contemporary geometry and design features with a multitude of build and specification options including disc or caliper brakes, plus full mudguard compatibility making the Endurance 725 the ideal all season road bike for the rider looking for retro style with modern performance and versatility. Full SpecificationFrame: Reynolds 725 steel, triple-butted, seamless welds.Colour: Black with white accents.Fork: Full carbon fibre monocoque, tapered steerer.Headset: LEVEL 52, 42-52mm, tapered.Brake Fitment: Flat mount disc.Cable Routing: Internal.Front Derailleur Mount: Band-on 28.6mm.Bottom Bracket: Threaded BSA 68mm.Seatpost Diameter: 27.2mm.Seatclamp: 30.0mm.Tyre Clearance: *32mm without mudguards fitted, 25mm with mudguards.Mudguard Compatible. Yes.Thru-Axles: 100/122/M12*P1.5 front - 142/173/M12*P1.5 rear.Sizes: XS, S, M, L, XL.Raw Frame Weight: 2100g - Forks 470g +/-5g.*Manufacturer dependant
A MODERN CLASSICThe Endurance 725 Disc complements the traditional looks of the Reynolds steel frame with contemporary geometry and design features with a multitude of build and specification options including disc or caliper brakes, plus full mudguard compatibility making the Endurance 725 the ideal all-season road bike for the rider looking for retro style with modern performance and versatility. Full SpecificationFrame: Reynolds 725 steel, triple-butted, seamless welds.Colour: British racing green with yellow accents.Fork: Full carbon fibre monocoque, tapered steerer.Headset: LEVEL 52, 42-52mm, tapered.Brake Fitment: Flat mount disc.Cable Routing: Internal.Front Derailleur Mount: Band-on 28.6mm.Bottom Bracket: Threaded BSA 68mm.Seatpost Diameter: 27.2mm.Seatclamp: 30.0mm.Tyre Clearance: *32mm without mudguards fitted, 25mm with mudguards.Mudguard Compatible. Yes.Thru-Axles: 100/122/M12*P1.5 front - 142/173/M12*P1.5 rear.Sizes: XS, S, M, L, XL.Raw Frame Weight: Frame - 2100g; Forks 470g +/-5g.*Manufacturer dependant
CGR 725 FRAMESETThe CGR 725 is a striking blend of multi-terrain versatility with the traditional style and compliance of a Reynolds steel frame. Resulting in a steel frame that is highly capable across a multitude of terrain and surfaces, a true one bike to do it all.Designed with meticulous attention to detail, the CGR 725 frameset is handcrafted from Reynolds 725 steel. Compatibility with 650b, 700c and 29 wheel sizes opens up a vast array of tyre options which allows you to tailor the setup to your terrain of choice or riding style. Designed from the outset with versatility as a key feature the frame has built-in mounts for mudguards or a rear mounted pannnier rack. The CGR 725 is built to handle the toughest roads, terrain and weather conditions and can take you anywhere in style and comfort. Full SpecificationFrame: Reynolds 725 steel, triple-butted, seamless welds.Colour: Midnight blue with copper accents.Fork: Full carbon fibre monocoque, tapered steerer.Headset: LEVEL 52, 42-52mm, Black.Brake Fitment: Flat mount disc.Cable Routing: Internal (excluding rear hose on double gear systems).Front Derailleur Mount: Band-on 28.6mm.Bottom Bracket: Threaded BSA 68mm.Seatpost Diameter: 27.2mm.Seatclamp: 30.0mm .Tyre Clearance: 45mm on 700c wheels, 47mm on 650b.Mudguard Compatible. YesThru-Axles: Front - 100/122/M12*P1.5 front - 142/173/M12*P1.5 rear.Sizes: XS, S, M, L, XL.Raw Frame Weight: 2300g, Forks 470g +/-5g.
Time Fluidity AKTIV Frameset The Time Fluidity is designed and optimised to be the perfect travel companion for long days in the saddle. It provides outstanding comfort and the ideal sitting position without compromising on its performance output. This frame will take you to new heights, pushing your riding experience father than ever before with efficiency, elegance and reliability.Time AKTIV Fork for Enhanced Comfort and ControlDesigned to excel in the endurance sector, this frame blends the best qualities of aerodynamics, power transfer and long-distance comfort perfectly. With the addition of the AKTIV fork, which has a custom tuned sprung-mass section within one of the fork legs, it eradicates road buzz for greater comfort and superior cornering traction.Features: Material: RTM Resin Transfer Mould Carbon Fibre Fork: AKTIV RTM Carbon Fibre Use: Race, Endurance, Tour Seatpost: Time TraditionalTechnologies: Carbon Fibre Braiding: Vectran fibre is characterised by a high absorption capacity, whereas Carbon fibre is known to be lighter and more rigid. Once combined, these fibres are braided to obtain a “sock” of fibres then moulded. The benefits of this technology compared to other processes are an advanced ride quality, comfort and outstanding handling. AKTIV: TIME has revolutionised the cycling world when they launched the AKTIV fork onto the market. They placed an AKTIV mass damper system in each sleeve of the fork. This lessens the vibratory phenomenon at its source and as close to the road as possible. By vibrating themselves at a given frequency, they dissipate vibrations felt in the seat, stem and handlebars. Unlike most existing systems, AKTIV fork is an active device fully preserving your physical potential, improving the behaviour of your bike, and increasing your pedalling efficiency. Resin Transfer Moulding (RTM): RTM technology enables precise and excellent reproducibility of the desired ride characteristics. The injection of the resin under pressure ensures consistent impregnation of the fibre weave layers and eliminates the risk of delamination and structural weakness.Buy Time Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
This trail-ready mountain bike (MTB) frame features a rock-solid 6061 aluminium build, which makes it more than capable of enduring the most demanding of terrain conditions. Nukeproof has also put this model through a hydroforming and triple-butting process for extra durability as you charge from trail to trail. Another highlight is its RockShox Super Deluxe Ultimate RCT rear shock, which gives you increased tuneability and control from your rear end suspension's performance. This makes it ideal for blasting across rock gardens, tree roots and whatever the trail has to throw at you on your ride. Benefitting from updated geometry, internal cable routing and 148x12mm rear hub spacing, this full-suspension MTB frame is fully equipped for the rigours of modern trail riding. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Full Suspension Alloy MTB Frame The Alloy Reactor features a custom triple butted hydro-formed tube set and carbon seat stays, which help reduce the overall weight of the frameset. Critically this reduces the unsprung weight; making the suspension as active as possible. The Reactor is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, we designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays Internal cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Two position adjustable Flip chip system Shock: RockShox Super Deluxe Ultimate RCT, Custom ML 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted Headset: Nukeproof, 44-56 IITS Weight: 3.72Kgs/8.2lbs (Medium option)