Box Two Prime 9 Speed ShifterClassed as Box's most durable shifter, this 9 speed model features a hard-wearing two-piece resin and steel lever construction, which makes it more than capable of handling all the intensity from exploring the MTB trails.The Box Two shifter is the only shifter on the market (other than our Box One) that comes factory stock with a hinged clamp. Box Two is our performance tier so this shifter still maintains the durable cast aluminium top shell but trades out the Box One's 1-piece pull-lever for a 2-piece resin and steel variant. All Prime 9 shifters take advantage of the 9-speed's inherent durability, simplicity, and reliability. Not only is the shifter mechanism joyfully simplified, but fewer shifts are needed for every mile of travel. And the best part is? Prime 9 is also terribly forgiving so you won't have to constantly adjust your set-up.FAQ:Does the Box Two Prime 9 Shifter come with a cable? Yes. All Prime 9 Twin Lever Shifters come with a stainless steel shift cable.How do I remove the cap from the cable port to install a new cable? To remove it, use a Phillips head screwdriver and turn it counter-clockwise a quarter turn You can then push the cap out by applying pressure to the cable from the other side. Please Note: The Cable Port is not a screw that un-threads from the cable port if you turn the cable port screw more than 90 degrees damage may occur.Is the Box Two Prime 9 Shifter compatible with other 9 speed derailleurs? No, traditional 9 speed systems use a Cable Pull that is not compatible with Prime 9.Features: Material: Glass Fibre / Nylon Composite, Steel, Aluminum Alloy Finish: Matte Onyx Box's Most Durable Shifter Hinged and Extruded Clamp 2 pc Pull Lever / Up to 3 Gears Per Shift* (two options available) Die Cast Top Shell Fast Action Release Lever Prime 9 TechnologyCompatibility: Box One Prime 9 11-50T Cassette Black Box Two Prime 9 11-50T Cassette Black Box Three Prime 9 Cassette Black Box One Prime 9 Chain 126L DLC Black Box Two Prime 9 126 Link Chain Nickel Box Three Prime 9 126 Link Chain Polished Box One Prime 9 Rear Derailleur Box Two Prime 9 X-Wide Rear Derailleur Black Box Three Prime 9 X-Wide Rear Derailleur Black Multi Shift Option Not Intended for E-Bike Use Single Shift Option Recommended for E-Bike UseWeight: 135gBuy Box Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Classed as Box's most durable shifter, this 9 speed model features a hard-wearing two-piece resin and steel lever construction, which makes it more than capable of handling all the intensity from exploring the MTB trails. The Box Two shifter is the only shifter on the market (other than our Box One) that comes factory stock with a hinged clamp. Box Two is our performance tier so this shifter still maintains the durable cast aluminium top shell but trades out the Box One's 1-piece pull-lever for a 2-piece resin and steel variant. All Prime 9 shifters take advantage of the 9-speed's inherent durability, simplicity, and reliability. Not only is the shifter mechanism joyfully simplified, but fewer shifts are needed for every mile of travel. And the best part is? Prime 9 is also terribly forgiving so you won't have to constantly adjust your set-up. Compatibility: • Box One Prime 9 11-50T Cassette Black • Box Two Prime 9 11-50T Cassette Black • Box Three Prime 9 Cassette Black • Box One Prime 9 Chain 126L DLC Black • Box Two Prime 9 126 Link Chain Nickel • Box Three Prime 9 126 Link Chain Polished • Box One Prime 9 Rear Derailleur • Box Two Prime 9 X-Wide Rear Derailleur Black • Box Three Prime 9 X-Wide Rear Derailleur Black • Multi Shift Option Not Intended for E-Bike Use • Single Shift Option Recommended for E-Bike Use FAQ - Does the Box Two Prime 9 Shifter come with a cable? Yes. All Prime 9 Twin Lever Shifters come with a stainless steel shift cable. - How do I remove the cap from the cable port to install a new cable? To remove it, use a Phillips head screwdriver and turn it counter-clockwise a quarter turn You can then push the cap out by applying pressure to the cable from the other side. Please Note: The Cable Port is not a screw that un-threads from the cable port if you turn the cable port screw more than 90 degrees damage may occur. - Is the Box Two Prime 9 Shifter compatible with other 9 speed derailleurs? No, traditional 9 speed systems use a Cable Pull that is not compatible with Prime 9.
The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit. This means that this kit is ideally suited for those using a 1x chain ring set up, without a front derailleur.Material: AL7075-T651Bar mounted shifter style remote leverCable operatedCable Length: 1.5mFinish: Sand blasted and hard anodised black
Brand-X Ascend Lever Kit (1x Gears)Specifically designed for use with a Brand-X mechanical dropper seatpost, this gear shifter-shaped dropper lever has been ergonomically shaped for easy operation. Designed to replace a front gear shifter on your bars, it’s perfect for those running a 1x drivetrain (ie. without a front shifter or front derailleur.)Reasons to Buy: Ergonomically shaped for easy operation. Perfect for those running a 1x drivetrain.Features: Material: AL7075-T651 Cable Length: 1.5m Finish: Sand blasted and hard anodised black Bar mounted shifter style remote lever Cable-operated Requires dropper post internal cable routing Also suitable for use on other brands of cable operated droppers 2 Year WarrantyBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit. This means that this kit is ideally suited for those using a 1x chain ring set up, without a front derailleur.Key Features:Material: AL7075-T651,Bar mounted shifter style remote lever,Cable operated,Cable Length: 1.5m,Finish: Sand blasted and hard anodised black.
This ergonomic paddle style remote lever is designed to sit next to your front shifter, allowing you to run your Ascend dropper seatpost when using a front derailleur and shifter.Key Features:Material: AL7075-T651,Bar mounted paddle style remote lever,Cable operated,Cable Length: 1.5m,Finish: Sand blasted and hard anodised black.
Introducing the Brand-X Ascend Dropper Seatpost shifter style lever kit. The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit. This means that this kit is ideally suited for those using a 1x chain ring set up, without a front derailleur.Material: AL6061-T6Bar mounted shifter style remote leverCable Length: 1.5mWeight: 40.7g (excluding cable)Adjustment: +10 degrees angle range and +7mm horizontal adjustmentFinish: Sand blasted and hard anodised blackWarranty: 2 Year
Brand-X Ascend Lever Kit V2 - (1 x Gears) This ergonomic shifter style dropper remote lever is designed to be positioned where your front shifter would normally sit. This means it's perfectly suited for riders who are using a 1x chain ring set up, without a front derailleur. This superb lever kit is compatible with all the Brand-X Ascend dropper seatposts and other cable actuated posts for a smooth and effortless operation.Adjustable Dropper Remote Thanks to its adjustable angle range of +10 degrees and a horizontal adjustment of +7mm, you can enjoy a more customised fit to suit your preferred hand position. To top it off, the cables can be installed at either end, so you can either route the cable ferrule into the lever, or you can use the screw and install the cable at the post.Features: Material: 6061-T6 AluminiumFinish: Sand blasted and hard anodised black Diameter: 22.2mm Cable Length 1.5m Cable Housing: 1500mm (inner cable 1710mm) Bar mounted shifter style remote lever Weight: 40.7g (excluding the cable 64g)Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Introducing the Brand-X Ascend Dropper Seatpost shifter style lever kit. The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit. This means that this kit is ideally suited for those using a 1x chain ring set up, without a front derailleur.Material: AL6061-T6Shimano I-Spec mount shifter style remote leverCable Length: 1.5mWeight: 40.7g (excluding cable)Adjustment: +10 degrees angle range and +7mm horizontal adjustmentFinish: Sand blasted and hard anodised blackWarranty: 2 Year
Brand-X Ascend Lever Kit V2 - (1 x Gears) I-Spec This ergonomic shifter style dropper remote lever is designed to be positioned where your front shifter would normally sit. This means it's perfectly suited for riders who are using a 1x chain ring set up, without a front derailleur. This superb lever kit is compatible with all the Brand-X Ascend dropper seatposts and other cable actuated posts for a smooth and effortless operation.Adjustable Dropper Remote Thanks to its adjustable angle range of +10 degrees and a horizontal adjustment of +7mm, you can enjoy a more customised fit to suit your preferred hand position. Plus, with this model, it neatly combines with Shimano I-Spec II brake levers to free up space on your bars and give a clean look. To top it off, the cables can be installed at either end, so you can either route the cable ferrule into the lever, or you can use the screw and install the cable at the post. Please Note: This particular lever kit is only compatible with Shimano hydraulic brake levers with I-Spec II fitment and does not include a handlebar mounting collar.Features: Material: 6061-T6 AluminiumFinish: Sand blasted and hard anodised black Compatibility: Shimano I-Spec II Diameter: 22.2mm Cable Length 1.5m Cable Housing: 1500mm (inner cable 1710mm) I-Spec II mounted shifter style remote lever Weight: 40.7g (excluding the cable 64g)Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This ergonomic shifter style remote lever is designed to be positioned where your front shifter would normally sit. This means that this kit is ideally suited for riders who are using a 1xchain ring set up, without a front derailleur. This stunning lever kit is compatible with all the Brand-X Ascend dropper posts and other cable actuated posts for a smooth and effortless operation. Adjustable Dropper Remote Thanks to its adjustable angle range of +10 degrees and a horizontal adjustment of +7mm, you can enjoy a more customised fit to suit your preferred hand position. To top it off, the cables can be installed at either end so you can either route the cable ferrule into the lever, or you can use the screw and install the cable at the post.
This ergonomic shifter style remote lever is designed to be positioned where your front shifter would normally sit. This means that this kit is ideally suited for riders who are using a 1xchain ring set up, without a front derailleur. This stunning lever kit is compatible with all the Brand-X Ascend dropper posts and other cable actuated posts for a smooth and effortless operation. Adjustable Dropper Remote Thanks to its adjustable angle range of +10 degrees and a horizontal adjustment of +7mm, you can enjoy a more customised fit to suit your preferred hand position. To top it off, the cables can be installed at either end so you can either route the cable ferrule into the lever, or you can use the screw and install the cable at the post. Please Note: This particular lever kit is only compatible with Shimano hydraulic brake levers with I-Spec II fitment and does not include a handlebar mounting collar.