DJD Supa Drive DriverSize: 1/8",CNC Cr-mo,Fits Halo DJD SupaDrive Hub ONLY. ,Sprocket Not Included.
DJD S.DRIVE Dirt Jump Disc, Single Speed, 11T Bush Drive, SupaDrive 120T engagement, Bolt-in - DJD Supa Drive Rear HubDeveloped with the help of Sam Pilgrim (and chosen by Matt Jones, Blake Samson and Sam Reynolds) we have taken the best-selling DJD Bush Drive hub and improved it further by adding the proven 120 teeth triple wedge pawl mechanism of the Supa Drive hub. This provides positive and secure drive, a freewheel sound like no other and micro-notch engagement gaps for that perfect pedal pick-up.BD hubs have been utilised successfully in the hardcore BMX market for quite a while, and the advantages of their lighter weight and improved durability over cartridge bearings are pretty well proven, especially when using compact cog sizes. The stresses caused in a Single Speed hub can be huge and, a bush spreads the loads involved over a much larger surface area than ball bearings can achieve, and therefore helps to avoid premature bearing failure.In addition to the BD features, we have fitted a lightweight alloy axle with tough, replaceable, M10 bolt-in Cro-Mo fixings and alloy caps. We also know that bolt-in fittings can be tricky if the axle starts to spin when turning the bolt, (as you have nothing to hold) - so we have also added a 6mm Hex broach deep inside the axle - just in case the axle starts to spin when you don't want it to!14mm adaptors included: the large surface faces of the cones allow us to also use 10-14mm adaptor washers - making this hub suitable for 10mm or 14mm dropouts.,Forged & CNC finished body with slotted flanges.,Bush Driver with screw-on 11T sprocket.,Hollow Alloy axle with 6mm central hex.,Cr-Mo M10 Bolt-in fixings.,14mm adaptors included..FeaturesSuper strong lightweight alloy axle.,2 sealed main body bearings and 1 hardened plastic driver bush.,3 wedge pawls ensure positive drive.,120 points of engagement.,Lightweight forged CNC finished alloy hub shell.,11T x 1/8" drivers sprocket fitted standard. ,9,10,11,13,14,16t sprockets also available.SpecificationsDrillings : 32 or 36H,Axle : Hollow Alloy axle with 6mm central hex,Disc Mount : 6 Bolt,Centre to Flange Center Left: 34mm, Center Right: 35mm,OLD 135mm,Dimensions : Flange Diameter: 58mm,Colour : Red or Black,Weight : 326g.
Rear Fix-G Track HubsAn ever present headache with traditional fixed hubs is the assembly of a drive sprocket that is attached by a thread being pulled in both directions by the pedal torque. The usual solution to avoiding the sprocket unwinding itself from the hub is a left-hand threaded lock-ring, butted up tight against the sprocket. But, as many riders have found out, this system can be quite volatile.We thought, there has to be a better way......and the solution - an HG splined hub body, with sprockets that slide on and an independent lockring that never has to handle rotational forces from the drive.Halo Fix-G advantages:Easy and secure fixing and servicing.,Adjustable chainline - 41 to 52mm.,Accepts 12 - 20T sprockets.,No need for chainwhip tools.."Halo's HG spline system is so obvious and brilliant that other brands must be kicking themselves for not thinking of it first. It can't slip or thread; it's way easier to fit or swap and will take down to 12t cogs, it's genius". Ty at the Footdown - www.thefootdown.co.uk"The Fix-g hub is great! It runs smoothly as the previous Halo hub but the fact that you can move the sprocket for a perfect chainline is great and you can feel the difference straight away. Also, it's really easy to do, everyone can do it without a mechanic's help." Ivan Fiorilla, 5th Floor riding club - London. www.the5thfloor.co.ukNote: The HG spline must ONLY be used with 7mm wide "fat foot" sprockets such as Halo Fat Foot sprockets or Gusset Double Six sprocket to avoid the cog biting into the alloy splines on the hub. Regular width HG sprockets should NEVER be used.SpecificationsMaterial Alloy forged and CNC machined,Drillings 32H, 36H or 48H depending on model,Bearings 2 x 6000 series Japanese sealed bearings.,Axle Hollow M10 Cr-Mo axle,Spoke Hole Circle Diameter (PCD) 62mm,spoke hole size (diameter) 2.5mm,Centre to Flange Left and Right: 34mm,OLD 120mm,Colour Black, Silver or White,Weight 328g.
Dozen 150 Rear Hub12mm through axle DH cassette hub with tough DH race proven performance.Includes sliding 12mm Cr-Mo axle to fit through-axle rigs.SpecificationsDrillings : 36H,Bearings : 6902 cartridge bearings,Spacing : 150mm,Disc Mount : 6 bolt,Ratchet : 3 Double width pawls.,Freehub Body : Cr-Mo HG type,Dimensions : C-L 42mm, C-R 28mm, flange 58mm,Colour : Black anodised or Powder-coated White.,Weight : Hub excluding axle 450g, Axle & nuts 214g.
Evaura 6D 700c WheelsLightweight 24mm wide clincher with a 22mm low profile section, laced with black double butted spokes and red alloy nipples.20H radial front, 24H (2:1 16/8E) rear spoke lacing for enhanced lateral rigidity.11spd Shimano/Sram or Campagnolo compatible. Spacers available to convert to 9 or 10spd.Specifications:T10 super alloy sleeved rim with CNC brake surface.,24mm wide x 22mm deep.,Tubeless-ready, supplied pre-taped.,Black stainless steel double butted spokes.,Front hub - 20H straight pull, sealed bearings.,Rear hub - 24H (2:1) 2x lacing, sealed bearings, 6 pawl, 30t engagement..Weights:Front - 668g,Rear - 898g,Pair - 1566g.Colours:Available in Black anodised or White powder coated.
A wider evolution of the classic road sport alloy rim.Lightweight with a comfort enhancing low profile section.Disc or rim brake compatible, with a CNC machined rim brake wall.Recommended Spoke Tensions:Non Disc wheels - Front: 80 to 100Kgs. Rear: 100 to 135Kgs.,Disc brake wheels - Front and Rear: 100 to 135Kgs.SpecificationsMaterial Nobium super alloy,Drillings 20H, 16/8E, 24H or 32H.,Eyelets None,ERD 595mm,Colour Black, Silver anodised or White powder coated,Dimensions Width - Outer 24mm, inner 19mm. Height 22mm,Weight 455g.
Lightweight 20" BMX race rims for Expert use.These lightweight, semi-aero box section alloy rims ensure a quick getaway out of the gate.Stainless nipple eyelets allow high tension spokes for a stiff wheel that transfers chain drive into forward motion with minimum effort.Available in 20x1 3/8" or 20x1.5"Recommended Spoke Tension:Front: 80 to 100Kgs.,Rear: 100 to 135Kgs..SpecificationsMaterial Niobium Alloy material with T-10 heat treatment.,Drillings 28, 32 or 36H,Eyelets Stainless Steel ,Colour Black,Dimensions 24mm Wide,ERD 420mm (20x1 3/8), ERD 376mm (20x1.5),ETRTO 451 (20x1 3/8), ETRTO 406 (20x1.5),Weight 388g (20x1 3/8").
EX3 Expert BMX Race WheelsThe super-low weights of our new 1.5" Expert race wheels and the 120T Supadrive hub offer the younger riders outstanding acceleration, whilst the tough box section rims give riders the confidence and security to nail the track.Precision assembled and hand trued with Halo Double butted spokes, 7075 CNC alloy nipples and Halo MX series hubs and double wall, eyeleted Halo EX3 (1.5") rims.,Performance optimised 28 hole front radial lacing with 32H rear lacing for spoke strength where it's required.,Front rims are black anodised all over, while the rear rim has a CNC finished brake wall for precision braking performance.,Two rear hub options..Recommended weight limits:EX3 (1.5") 60Kg (130lbs).Specifications:Front:Halo MXF 28H hub (Red),Halo Double butted spokes (Black) - radial laced.,Halo 7075 CNC Alloy nipples (Red) ,Halo EX3 rim with eyelets (All Black),Weight: 625g exc. bolts,Supplied Cr-Mo axle bolts with alloy covers.,Spoke length: 166mm.Rear Cassette:Halo MXRC 32H cassette hub with 1/2 alloy driver (Red),Halo Double butted spokes (Black),Halo 7075 CNC Alloy nipples (Red),Halo EX3 rim with eyelets (Black with CNC brake wall),Weight: 673g (exc. bolts or sprocket.),Supplied with Cr-Mo axle bolts with alloy covers.,Spoke length: 175mm (non-drive side), 173mm (drive side) mm.Rear Freewheel:Halo MXR-FW screw-on freewheel hub. ,Halo Double butted spokes (Black),Halo 7075 CNC Alloy nipples (Red),Halo EX3 rim with eyelets (Black with CNC brake wall),Weight: 716g ,Supplied with Cr-Mo axle bolts with alloy covers.,Spoke length: 176mm ( non-drive side), 174mm (drive side) mm.
Fat Bike Front HubsDeveloped using the proven technology of our well established mountain bike products our Fat bike hubs deliver excellent performance.Light, smooth, dependable and highly adaptable for different forks. Our 135mm and 150mm front fat hubs are CNC machined from high strength forged 7075 alloy and feature two durable 6804 sealed cartridge bearings.135mm hub specifications:Please note: Our 135mm hubs are ONLY suitable for forks with front disc spacing, not rear spacing.Supplied to fit 135mm x 15mm thru-axle.Axle options included:142mm x 15mm thru-axle end caps.,M10 bolt-in 135mm axle (includes bolts), fits a regular QR dropout..Weights:15mm thru-axle 210g,10mm female type 260g (without bolts).,10mm female type 323g (inc bolts)..Dimensions:Flange spacing: 96mm,Flange diameter: 58mm,C-L 40mm,C-R 52mm.150mm hub specifications:Supplied to fit 150mm x 15mm thru-axle..Weight: 223g.Dimensions:Flange spacing: 111mm,Flange diameter: 58mm,C-L 48mm,C-R 60mm.SpecificationsMaterial High strength forged 7075 alloy shell,Drillings 32H,Bearings 6804 Cartridge bearings,Disc Mount 6 bolt,Model Ref 6DSWF3 (135mm) 6DSWF5 (150mm),Colour Black.
Optional extra bolted axles for Halo Fat bike hubs.Front and rear options..
1mm thick, high quality butyl rubber inner tubes with standard presta type valves.Suitable for most Fat bike tyre applications.SpecificationsCompound Butyl rubber,Size 26 x 4.0" (x1.0mm) - presta valve,Weight 530g.
Fat Bike Rear HubsDeveloped using the proven technology of our well established mountain bike products our Fat bike hubs deliver excellent performance.Light and smooth with reliable power transfer. The ultra-dependable drive system of this hub uses 6 independently sprung, double tipped, reversed pawls; giving 12 point simultaneous engagement on a 30 click cro-mo drive ring.Available with Shimano HG (Alloy or Cr-Mo) or Sram XD freehubs.170mm hub specifications:4 sealed cartridge bearings.,Flange spacing: 78mm,Flange diameter: 58mm,C-L 40mm,C-R 35mm,Chainline: 61.7mm.Supplied to fit 177mm x 12mm thru-axle with 170mm x M10 bolt-in axle set included. Fits regular QR or horizontal SS dropouts.Weights: 12mm thru-axle 400g, 10mm female type 478g (inc bolts).190mm hub specifications:5 cartridge bearings.,Flange spacing: 110mm,Flange diameter: 58mm,C-L 62mm,C-R 45mm,Chainline: 71.7mm.Supplied to fit 190mm x 12mm thru-axle with end caps for 197mm x 12mm thru-axle system included.Weight: 432grams (12mm axle type)SpecificationsDrillings 32H,Bearings 6902 cartridge bearings,Model Ref 6DSWR7 (170mm) 6DSWR9 (190mm),Colour Black,Weight 400 - 476g.