Fizik Cyrano R3 Road HandlebarRidden to success by multiple UCI World Tour teams, the Cyrano R3 bar is made from top-end Ergal aluminium, making it both light and strong. Fizik used this material to ensure this bar delivers pinpoint handling and efficient power transfer through reduced flexing when you’re sprinting or climbing. Just as your choice of Fizik Spine Concept saddle shape is guided by your degree of spinal flexibility and subsequent pelvic rotation, Fizik offers this same Spine Concept guideline to help you choose your most comfortable road handlebar shape.The application of The Spine Concept to handlebar shape is the result of Fizik's research with riders of 3 UCI World Tour Teams that were riding Fizik saddles. A correlation was found between the saddle shape each rider was using and the handlebar shape they were riding.Features: Material: Ergal 7075-T6 Aluminium Stem Clamp Diameter: 31.8mm Flare of Drops: 38 and 40cm Widths: 2°; 44 and 46mm Widths: 3° Lever Compatibility: Standard 23.8mm clamp size Compatible with GPS Mounts: Yes Clip-on Aerobar Compatible: Yes Internal Cable Routing: No Graphics on both sides to mark where levers should be placed and where to finish wrapping bar tape Width measured centre to centre Weight: 245g (size 42cm) Handlebar Options:Your shoulders’ width should determine your handlebar width. Choose from the following centre to centre measurements: 40/42/44/46cm. The Snake Handlebar: If you are very spinally flexible (far less than 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Snake. You are better able to reach further and get down lower to use the full radius of more rounded, classic-style, deeper-drop handlebars. You will prefer the Snake Handlebar because it has a longer reach and deeper, classic-style drop The Chameleon Handlebar: If you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a chameleon. You are better able to reach further, but perhaps you can’t get down quite as low on the handlebar drops as a Snake would be able to. You will prefer the Chameleon Handlebar because it has a longer reach but a shallower, more ergonomic-style drop The Bull Handlebar: If you have a relatively low degree of spinal flexibility (more than 90 degrees between your straight legs and back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Bull. You will not be able to reach as far or bend as low as a Snake or a Chameleon would be able to. You will prefer the Bull Handlebar because it has a shorter reach and a shallower, more ergonomic-style handlebar dropBuy Fizik Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fizik Cyrano R3 Road HandlebarRidden to success by multiple UCI World Tour teams, the Cyrano R3 bar is made from top-end Ergal aluminium, making it both light and strong. Fizik used this material to ensure this bar delivers pinpoint handling and efficient power transfer through reduced flexing when you’re sprinting or climbing. Just as your choice of Fizik Spine Concept saddle shape is guided by your degree of spinal flexibility and subsequent pelvic rotation, Fizik offers this same Spine Concept guideline to help you choose your most comfortable road handlebar shape.The application of The Spine Concept to handlebar shape is the result of Fizik's research with riders of 3 UCI World Tour Teams that were riding Fizik saddles. A correlation was found between the saddle shape each rider was using and the handlebar shape they were riding.Features: Material: Ergal 7075-T6 Aluminium Stem Clamp Diameter: 31.8mm Flare of Drops: 38 and 40cm Widths: 2°; 44 and 46mm Widths: 3° Lever Compatibility: Standard 23.8mm clamp size Compatible with GPS Mounts: Yes Clip-on Aerobar Compatible: Yes Internal Cable Routing: No Graphics on both sides to mark where levers should be placed and where to finish wrapping bar tape Width measured centre to centre Weight: 245g (size 42cm) Handlebar Options:Your shoulders’ width should determine your handlebar width. Choose from the following centre to centre measurements: 40/42/44/46cm. The Snake Handlebar: If you are very spinally flexible (far less than 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Snake. You are better able to reach further and get down lower to use the full radius of more rounded, classic-style, deeper-drop handlebars. You will prefer the Snake Handlebar because it has a longer reach and deeper, classic-style drop The Chameleon Handlebar: If you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a chameleon. You are better able to reach further, but perhaps you can’t get down quite as low on the handlebar drops as a Snake would be able to. You will prefer the Chameleon Handlebar because it has a longer reach but a shallower, more ergonomic-style drop The Bull Handlebar: If you have a relatively low degree of spinal flexibility (more than 90 degrees between your straight legs and back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Bull. You will not be able to reach as far or bend as low as a Snake or a Chameleon would be able to. You will prefer the Bull Handlebar because it has a shorter reach and a shallower, more ergonomic-style handlebar dropBuy Fizik Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fizik Cyrano R3 Road HandlebarRidden to success by multiple UCI World Tour teams, the Cyrano R3 bar is made from top-end Ergal aluminium, making it both light and strong. Fizik used this material to ensure this bar delivers pinpoint handling and efficient power transfer through reduced flexing when you’re sprinting or climbing. Just as your choice of Fizik Spine Concept saddle shape is guided by your degree of spinal flexibility and subsequent pelvic rotation, Fizik offers this same Spine Concept guideline to help you choose your most comfortable road handlebar shape.The application of The Spine Concept to handlebar shape is the result of Fizik's research with riders of 3 UCI World Tour Teams that were riding Fizik saddles. A correlation was found between the saddle shape each rider was using and the handlebar shape they were riding.Features: Material: Ergal 7075-T6 Aluminium Stem Clamp Diameter: 31.8mm Flare of Drops: 38 and 40cm Widths: 2°; 44 and 46mm Widths: 3° Lever Compatibility: Standard 23.8mm clamp size Compatible with GPS Mounts: Yes Clip-on Aerobar Compatible: Yes Internal Cable Routing: No Graphics on both sides to mark where levers should be placed and where to finish wrapping bar tape Width measured centre to centre Weight: 245g (size 42cm) Handlebar Options:Your shoulders’ width should determine your handlebar width. Choose from the following centre to centre measurements: 40/42/44/46cm. The Snake Handlebar: If you are very spinally flexible (far less than 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Snake. You are better able to reach further and get down lower to use the full radius of more rounded, classic-style, deeper-drop handlebars. You will prefer the Snake Handlebar because it has a longer reach and deeper, classic-style drop The Chameleon Handlebar: If you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a chameleon. You are better able to reach further, but perhaps you can’t get down quite as low on the handlebar drops as a Snake would be able to. You will prefer the Chameleon Handlebar because it has a longer reach but a shallower, more ergonomic-style drop The Bull Handlebar: If you have a relatively low degree of spinal flexibility (more than 90 degrees between your straight legs and back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Bull. You will not be able to reach as far or bend as low as a Snake or a Chameleon would be able to. You will prefer the Bull Handlebar because it has a shorter reach and a shallower, more ergonomic-style handlebar dropBuy Fizik Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This riser bar is engineered for fast-paced MTB rides, as it gives you exceptional strength and control on your mountain bike.It features a hard-wearing alloy construction, which makes it more than capable of handling all the abuse that's associated with shredding the mountain bike trails.Nukeproof has also put this riser bar through a shot-peening process, which gives it extra durability as you tackle all the challenges that are associated with all-day epics in the mountains. Key Features: Material: 6061 Alloy,Finish: Shot-peened,Backsweep: 9 degrees,Upweep: 5 degrees,Length: 800mm,Diameter: 35mm,Technical Markings: Markings on the top of the handlebar,Weight: 385g (25mm rise version).
This stylish mount allows you to take full advantage of all the robust data that your Edge givesThe Edge is out in front of you for easier, heads up positioning and increased safetyFits 31.8 mm barsCompatible with Edge 200, 500, 800 and Forerunner 310XT, 910XT with the quick release kitWeighs just 26 gMade from impact resistant plastic.Please note for the mount to work with the Forerunner 910XT or 310XT you must remove the screws from the bottom, rotate the inner-mount and reinsert the screws, and your watch will mount in the proper orientation on the handlebar
This extended length plastic mount allows you to take full advantage of all the data that your Edge givesThe Edge is out in front of you for easier, heads up positioning and increased safety,Fits 31.8 mm bars,Compatible most imprtantly with Edge 1000 but also with Edge 810, 800, 510, 500, 200, plus Forerunner 310XT, 910XT with the quick release kit,Weighs just 30 g,Made from impact resistant plastic.Please note for the mount to work with the Forerunner 910XT or 310XT you must remove the screws from the bottom, rotate the inner-mount and reinsert the screws, and your watch will mount in the proper orientation on the handlebar
Clarks Clout Hydraulic Disc Brake (Rotor)The Clout Hydraulic Disc Brake from Clarks is perfect for MTB (mountain bike) riders who like to push the pace and need a reliable model with top-notch stopping power. This Disc Brake features a durable alloy lever construction for tackling the toughest of trails. The Clout also offers a dependable braking modulation for a consistent feel you can count on when challenging yourself on and off the track. Adjustable MTB (mountain bike) Disc BrakeEasy to set-up and maintain, Clarks has gone the extra mile by equipping this version with lever reach adjustment. This means you'll benefit from being able to customise the distance from your handlebar to the lever to suit your riding style, disciple and preferences. This is a perfect choice of upgrade for riders who want higher-end braking performance from an affordable disc brake.Features:Lever Material: AlloyRotor Material: Stainless SteelUse: MTBPistons: 2-pistonAdjustment: Lever reachType: Hydraulic disc brakeOil: Mineral OilRecommended brake Pad: VRS811Weight: 419g (approx)Buy Clarks Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
An efficient, light weight, single action design which inflates to 120psi. Small size fits easily in a pocket. CNC aluminium barrel and handle,Smarthead Threadlock with integral dust cap,Side mount bracket,18x3.6x2.5cm,85g.
Cyrano is fizik’s range of cockpit components, comprising handlebars, stems and seatposts. Handlebars are highly-stressed, safety-critical parts, making strength and fatigue resistance of paramount importance. Low weight is of course also a priority. Cyrano handlebars are available in three models, according to material specification, and in three shapes to fit different rider physiques. Each shape is carefully designed to give easy transitions between different riding positions – tops, hoods and drops. The range of nine fizik Cyrano handlebars models are each available in a choice of four widths, to ensure a perfect fit. The Cyrano R3 is made using Ergal aluminum; a 7075-series aluminum, with a high strength-to-density ratio that has the highest level of stiffness. Ergal also has good fatigue resistance, particularly important in handlebars. The Cyrano R3 Bull accommodate for the least flexible Bulls riders who require a slightly more upright riding position for maximum comfort and efficiency. This is produced by reducing the reach (80 mm) and introducing a still shallower drop (130 mm).
The BL-MT500 brake lever delivers high-powered mountain biking performance and I-spec II compatibility.Great value easy to use hinged design brake lever gives you plenty of power at your finger tipsShort stroke Servo-Wave mechanism for quick pad engagement and more power for aggressive ridingOpening clamp band design with hinge for easy Installation and removalAlloy brake lever for secure and dependable brakingFor use with mineral oil onlyAn increase in pad clearance at the calliper has enabled Shimano to use their proven Servo Wave technology. As the brake lever is pulled a cam linkage enables rapid pad to rotor engagement, at the point of contact the cam moves across multiplying the leverage ratio and increasing the stopping power. Adjustable free stroke enables you to fine tune the amount of lever pull before pad and rotor engagement.
The BL-MT500 brake lever delivers high-powered mountain biking performance and I-spec II compatibility.Great value easy to use hinged design brake lever gives you plenty of power at your finger tipsShort stroke Servo-Wave mechanism for quick pad engagement and more power for aggressive ridingOpening clamp band design with hinge for easy Installation and removalAlloy brake lever for secure and dependable brakingFor use with mineral oil onlyAn increase in pad clearance at the calliper has enabled Shimano to use their proven Servo Wave technology. As the brake lever is pulled a cam linkage enables rapid pad to rotor engagement, at the point of contact the cam moves across multiplying the leverage ratio and increasing the stopping power. Adjustable free stroke enables you to fine tune the amount of lever pull before pad and rotor engagement.
Whether you're training or competing, this road bike drop handlebar is engineered for smooth, light and dependable steering performance. It features a hard-wearing 7050 aluminium build, which makes it more than capable of handling all of the intensity associated with racing. Zipp has also equipped this model with comfortable geometry, so you can benefit from smooth transitions and ergonomic hand positioning. Another highlight is its clip compatible design, which allows you to add clip-on aerobars (available separately) for an even broader range of positioning and comfort. Weighing in at only 275g, this is a lightweight choice of upgrade for dominating your way to the finish line. Race-Ready Road Bike Drop Handlebar A traditional road racer’s bar, the Service Course SL-88 helps you achieve a “long-and-low” position on the bike. The ends of the drops provide a horizontal flat position for the rider to rest straight down upon. This versatility comes from the bar’s longer 88mm reach (the horizontal distance from the bar’s stem clamp area to centre of the brake perch) and deeper 130mm drop (vertical distance from the bar’s stem clamp area to bottom of drops). In addition, the bar’s 14° ramp angle provides a smooth transition to the brake hoods for a comfortable ergonomic hand position on the hoods. 7050 aluminium. Lightweight and durable. Drops are angled outward by 3 degrees to reduce wrist strain. Clip compatible. Manufacturer's Part Numbers: 00.6618.026.030 Black/Black 40cm 00.6618.026.040 Black/Black 42cm 00.6618.026.050 Black/Black 44cm