Thread the nut onto the TNS, insert into the fork stack, and tap it in with a hammer. Sets the starfangled nut to 15mm and keeps it straight. Long handle helps prevent pinched fingers.
The Universal Head Cup Remover will also remove the PressFit 30 (PF30) bottom bracket units. The PressFit 30 inside diameter is the same as headset cups, and are pressed in the same manner.
With two different insert rings and an aluminium insert preventing any direct contact with your bearing's surface, the Oversized Crown Race Setting System CRS-15.2 allows you to gently tap the end cap to fix the race firmly and accurately in place. Bundled with an extension for working on fork steering tubes up to 425mm, this is a great bit of kit making sure your races are set correctly.
The TNS-4 makes it quick and easy to install star-fangled nuts used with 1" and 1-1/8" threadless headset systems
The Park Tool 758.2 will ream and face the head tubes of bikes that use the OnePointFive Interface StandardThe 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and ReamerMust also be used with the 750 Centering Cone Adaptor to ensure correct alignment1.9516-inch (49.57mm) diameter reamer/2.441-inch (62mm) facerBores a machined surface to a depth of approximately 25mm and then faces the end of the headtubeSHIS terminology: The 758.2 is for EC49 upper and lower headtubesUse with generous quantities of Park CF2 cutting fluid for best results and prolonged tool life
Key Features: The Park tool 768 is a 43.8mm pilot for facing head tubes using the low profile Zero Stack type headset,The 768 is used with the 690-XL facer and the 750 centering cone adapter,Facing the head tube will improve the alignment of the bearings,The 768 pilot fits the Park tool HTR-1 Head tube Reamer and Facer Set.
Key Features: The 750.2 Centring cone adapter increases the size of the centering cone of the HTR-1 Head tube Reaming and Facing Set,Fits headtubes with an inside diameter of 38-60mm,Several headset standards use large head tube inside diameters,The 750.2 will allow the HTR-1 to be used with the IS (intergrated headset cups) and the OnePointFive (1.5 inch) headset standard,The HTR-1 must have the correct cutting tool and pilot for the corresponding standard.
Key Features: Facing improves the alignment of bearings in the headset, The 690-XL has an approximate diameter of 58mm and is a larger version of the 690 facer for facing head tubes with low profile Zero Stack type headsets,Must be used with the 768 pilot to ensure the frame is reamed and faced accurately.
Having the right tool for the job is essential when working on bicycles. Pedro's flat wrenches give professional quality, precision fit wrenches required to properly install, remove, and adjust components. Pedro's headset flat wrenches are made from 3.2mm thick, precision laser cut, heat-treated tool steel for the ultimate in strength and long-lasting performance. Pedro's designed each flat wrench to fit perfectly protecting the component and ensuring simple and safe usage for the mechanic. Each ergonomically designed flat wrench also features a single-ended design with cushioned grip to provide maximum leverage & comfort.The Pedro's 32mm Headset Wrench fits 32mm threaded headsets. ,The Pedro's 36mm Headset Wrench fits 36mm threaded headsets. ,The Pedro's 40mm Headset Wrench fits 40mm threaded headsets. ,Backed by Pedro's lifetime warranty..
Replaces standard headset with Pitlock coded nut and headset cap
The Doyenne Headset features highly polished angular contact bearings to ensure smoothness, and the top cap is CNC machined from 6061 alloy and sealed to keep moisture away from the bearings. To protect the lower bearings, we've included a CNC machined 7075 alloy crown race.
The titanium nitrite coated races in the Primavera 1-1/8"-1.5" Integrated Headset roll smoothly and won’t rust, while the angular contact bearings provide stability and allow for adjustability. Prime wanted the headset to run smoothly and last for many miles in all conditions, so they chose quality sealed cartridges to protect the bearings from the elements. The looks match the performance thanks to a Prime branded carbon top cap and cover. Prime didn’t hold back on the crown race either – it is CNC'd from 7075 alloy, which provides an improved contact point for the headset. And, if you want to slam your stem like the pros, select the short option, which features a 2.4mm top cover.