DT Swiss 240 hubs need no introduction. Look up reliability in the dictionary and you'll see a picture of the 240! The latest 240 EXP hubs are better than ever; lighter, smoother and just as cool and reliable as they always have been!EXP Ratchet is lighter, even more reliable and offers fast pickup with 36 points of engagementMachined construction is super light yet strong enough to last for years under the hardest ridersCustom made DT steel bearings offer incredible durability and silky smooth runningStraight pull spoke design builds into a lighter, stiff wheel with stronger spokesCentre Lock brake mount allows you to run almost any rotor (6-bolt adaptors sold separately)Suitable for frames with 142 x 12mm thru-axlesDT Swiss 240 hubs are some of the nicest finished, smoothest rolling and most durable around. Firstly, every part of the hub, from the aluminium shell right down to the end caps are machined to make them as light as possible while retaining enough strength to give years of reliable service. They then spin on bearings custom made for DT Swiss that provide incredibly smooth and drag free running as well as supremely long life; these hubs will just keep on turning, no matter what the weather! The 240 EXP uses the DT's new Ratchet EXP, an even more refined and evolved ratchet drive system. By moving the drive-side hub bearing inside the inner 36 tooth ratchet itself, DT have decreased the number of moving parts whilst giving the bearings a wider stance. The result is a hub that is even more reliable and up to 20% lighter than the previous generation 240 and stiffer to boot with improved bearing alignment and long term durability. The 240 EXP is truly one of the finest hub DT has ever made. If you want a rear hub that looks great, rolls smoothly and will give you years of reliable service, look no further than the DT Swiss 240!
Introducing the Bosch Fontus Gen 2 Portable Pressure Washer. Unlike traditional high-pressure washers, the Fontus is perfect for use at home or on the go due to its 15L tank and an 18V battery. It features adjustable pressure modes and four spray patterns for a variety of different applications and its attachable SmartBrush is ideal for cleaning bikes and along with many other applications.Versatile spray patterns and adjustable pressure - The ideal tool for cleaning cars and bikes, rinsing muddy boots and dustbins, or even showering down dirty feet and paws in summer.Fast set-up and easy manoeuvrability - Fill up the water tank, extend the handle and experience easy cordless manoeuvrability without being limited by the reach of a power cable - clean anywhere, anytime.Accessory storage and in-use gun holder for ultimate convenience - With the hose, spray gun and SmartBrush all stored on the tool for ultimate convenience and quick set up, simply slot in the Bosch 18V battery and begin to clean.Cleaning made simple - For those tasks where water isn t quite enough, the SmartBrush comes with the tool, stores neatly in the Fontus front storage casing and works perfectly for scrubbing stubborn dirt on barbecues, boots, car wheels and more.Mobile cleaning at home or on the go - Simply load the Fontus into your car and have easy access to controlled pressure-cleaning after a bike ride, muddy walk with the dog or outdoor activity.Power for ALL cordless systems from Bosch - Whether drilling, cleaning or gardening. Switch quickly and easily between different devices with the 18 V Power for ALL battery from Bosch. For even more flexibility the battery fits also in tools of other Power for ALL battery alliance partner.With the Fontus Gen II having an increased 20 bar max pressure, cleaning is easier than ever. Gen 2 of the Fontus helps keep prized possessions clean without damaging delicate paintwork. Ideal for an enthusiastic user, the 12 adjustable pressure modes allow for total control.Providing quick set-up and easy manoeuvrability, the cordless Fontus makes fast results easy. Unlike traditional high-pressure washers, this portable cleaner is perfect for use at home or on the go due to its 15L water tank and an 18V battery. Enjoy adjustable pressure modes and four spray patterns - a pencil jet for stubborn dirt, a 15-degree fan jet for precision on smaller surfaces, a fan jet to rinse larger areas and a shower jet for gentle cleaning. Its attachable SmartBrush is ideal for rinsing windows and bike wheels. An accessory storage and in-use gun holder make cleaning even more convenient.
DT Swiss 240 hubs need no introduction. Look up reliability in the dictionary and you'll see a picture of the 240! The latest 240 EXP hubs are better than ever; lighter, smoother and just as cool and reliable as they always have been!EXP Ratchet is lighter, even more reliable and offers fast pickup with 36 points of engagementLightweight aluminium hub shell builds into a strong, stiff wheelMachined construction is super light yet strong enough to last for years under the hardest ridersCustom made DT steel bearings offer incredible durability and silky smooth runningSuitable for frames with 130 x 5mm dropoutsDT Swiss 240 hubs are some of the nicest finished, smoothest rolling and most durable around. Firstly, every part of the hub, from the aluminium shell right down to the end caps are machined to make them as light as possible while retaining enough strength to give years of reliable service. They then spin on bearings custom made for DT Swiss that provide incredibly smooth and drag free running as well as supremely long life; these hubs will just keep on turning, no matter what the weather! The 240 EXP uses the DT's new Ratchet EXP, an even more refined and evolved ratchet drive system. By moving the drive-side hub bearing inside the inner 36 tooth ratchet itself, DT have decreased the number of moving parts whilst giving the bearings a wider stance. The result is a hub that is even more reliable and up to 20% lighter than the previous generation 240 and stiffer to boot with improved bearing alignment and long term durability. The 240 EXP is truly one of the finest hub DT has ever made. If you want a rear hub that looks great, rolls smoothly and will give you years of reliable service, look no further than the DT Swiss 240!
DT Swiss 240 hubs need no introduction. Look up reliability in the dictionary and you'll see a picture of the 240! The latest 240 EXP hubs are better than ever; lighter, smoother and just as cool and reliable as they always have been!EXP Ratchet is lighter, even more reliable and offers fast pickup with 36 points of engagementLightweight aluminium hub shell builds into a strong, stiff wheelMachined construction is super light yet strong enough to last for years under the hardest ridersCustom made DT steel bearings offer incredible durability and silky smooth runningCentre Lock brake mount allows you to run almost any rotor (6-bolt adaptors sold separately)Suitable for frames with 142 x 12mm thru-axlesDT Swiss 240 hubs are some of the nicest finished, smoothest rolling and most durable around. Firstly, every part of the hub, from the aluminium shell right down to the end caps are machined to make them as light as possible while retaining enough strength to give years of reliable service. They then spin on bearings custom made for DT Swiss that provide incredibly smooth and drag free running as well as supremely long life; these hubs will just keep on turning, no matter what the weather! The 240 EXP uses the DT's new Ratchet EXP, an even more refined and evolved ratchet drive system. By moving the drive-side hub bearing inside the inner 36 tooth ratchet itself, DT have decreased the number of moving parts whilst giving the bearings a wider stance. The result is a hub that is even more reliable and up to 20% lighter than the previous generation 240 and stiffer to boot with improved bearing alignment and long term durability. The 240 EXP is truly one of the finest hub DT has ever made. If you want a rear hub that looks great, rolls smoothly and will give you years of reliable service, look no further than the DT Swiss 240!
DT Swiss 240 hubs need no introduction. Look up reliability in the dictionary and you'll see a picture of the 240! The latest 240 EXP hubs are better than ever; lighter, smoother and just as cool and reliable as they always have been!EXP Ratchet is lighter, even more reliable and offers fast pickup with 36 points of engagementLightweight aluminium hub shell builds into a strong, stiff wheelMachined construction is super light yet strong enough to last for years under the hardest ridersCustom made DT steel bearings offer incredible durability and silky smooth runningStraight pull spoke design builds into a lighter, stiff wheel with stronger spokesSuitable for frames with 130 x 5mm dropoutsDT Swiss 240 hubs are some of the nicest finished, smoothest rolling and most durable around. Firstly, every part of the hub, from the aluminium shell right down to the end caps are machined to make them as light as possible while retaining enough strength to give years of reliable service. They then spin on bearings custom made for DT Swiss that provide incredibly smooth and drag free running as well as supremely long life; these hubs will just keep on turning, no matter what the weather! The 240 EXP uses the DT's new Ratchet EXP, an even more refined and evolved ratchet drive system. By moving the drive-side hub bearing inside the inner 36 tooth ratchet itself, DT have decreased the number of moving parts whilst giving the bearings a wider stance. The result is a hub that is even more reliable and up to 20% lighter than the previous generation 240 and stiffer to boot with improved bearing alignment and long term durability. The 240 EXP is truly one of the finest hub DT has ever made. If you want a rear hub that looks great, rolls smoothly and will give you years of reliable service, look no further than the DT Swiss 240!
crankbrothers Highline 7 Dropper Seat PostEngineered for intense MTB rides, this dropper seatpost allows you to adjust your saddle's position for optimum climbing and descending. Keeping your momentum flowing across unpredictable terrain conditions, this seat post features a tough aluminium construction to keep you in control. This makes it more than capable of handling all the knocks and bumps from riding across rocky terrain conditions at speed. Crankbrothers has also equipped this trail-ready seatpost with Igus bearings and a high-quality Jagwire cable. Features: Material: 7075-T6 Aluminium Use: MTB Max Extended Length: 237mm Max Insertion Length: 217mm Total Post Length: 367mm Minimum Stack Height: 47mm Bolt: 2-bolt Remote: Not included Included: Jagwire cable and casing Weight: 475g (30.9mm), 490g (31.6mm)Manufacturers Part Number: 31.6mm, 100mm: CRB-16379 30.9mm, 150mm: CRB-16382 30.9mm, 125mm: CRB-16380 31.6mm, 170mm: CRB-16385 31.6mm, 150mm: CRB-16383 30.9mm, 100mm: CRB-16378 31.6mm, 125mm: CRB-16381 30.9mm, 170mm: CRB-16384Buy Crank Brothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Topeak D-Torq DX Wrench Protect your investment with the feature packed torque wrench. D-Torq DX features a reversible ratcheting head, standard 3/8” square drive, a box wrench for tool bits and can measure torque in 4 units including N-m, kg-cm, in-lb, or ft-lb.The digital readout provides a visible display while there are also separate programmable audible warnings for your target torque value and another for over torque. Never strip threads again! Topeak D-Torq DX Wrench Features: Torque range - 4-80 Nm Added Features - Pre-set Torque Valve, Warning Sound For Over Pre-set Torque Valve, LCD Display, Auto Off Tool Material - Hardened Steel/Engineering Grade Plastic Tools - 3/8” Square Drive Torx Bit - T25/T30/T40 Weight - 430g/0.95lb Storage Box - Hard Shell Size (L x W x H) - 33.4 x 3.2 x 2.8cm (13.1” x 1.2” x 1.1”) Screw Drivers - #2 Phillips Sockets - 8/9/10/11/12/13/14/15mm Adapter - 3/8” Square Drive Adapter For Bits Unit - 4 unit (N-m/kg-cm/in-lb/ft-lb) Battery Life - 48 hrs Allen Wrenches - 3/4/5/6/8/10mm Material - Hardened Steel/ Engineering Grade Plastic Buy Topeak D-Torq DX Wrench from Chain Reaction Cycles, the World's Largest Online Bike Store.
Features: Torque range - 4-80 Nm Added Features - Pre-set Torque Valve, Warning Sound For Over Pre-set Torque Valve, LCD Display, Auto Off Tool Material - Hardened Steel/Engineering Grade Plastic Tools - 3/8” Square Drive Torx Bit - T25/T30/T40 Weight - 430g/0.95lb Storage Box - Hard Shell Size (L x W x H) - 33.4 x 3.2 x 2.8cm (13.1” x 1.2” x 1.1”) Screw Drivers - #2 Phillips Sockets - 8/9/10/11/12/13/14/15mm Adapter - 3/8” Square Drive Adapter For Bits Unit - 4 unit (N-m/kg-cm/in-lb/ft-lb) Battery Life - 48 hrs Allen Wrenches - 3/4/5/6/8/10mm Material - Hardened Steel/ Engineering Grade Plastic
GT Air 20 BMX BikeEntry-level freestyle BMX riding has never been better equipped than with the GT Air 20 BMX Bike. An all new starter bike, the Air 20 has been engineered to the same level of detail and design as the pro models, mirroring the sizing and geometry for a top-end experience from a beginner-level BMX. The Air raises the bar when it comes to learning the ropes and is well equipped for many years of developing your BMX riding style and increasing your confidence and ability. Features: Frame: Hi-Ten Steel Tubes, DT Gusset, American BB, Seat Stay U-Brake, 1-1/8" H/T, w/ Removable Rotor Tabs Fork: GT FS Design, Hi-Ten 2pc. Steerer & Tapered Legs, 31mm OffSet, 3/8" Axle Dropouts Crankset: GT Power Series Cr-Mo 3pc., 170mm Arms, 19mm x 8T Cr-Mo Spindle, GT 25T Steel Chainwheel Rims: Alloy single wall, 36h Hubs: Front: Steel Body, Loose Ball 3/8" x 150mm Heat Treated Axle, 36h, 15mm Nut; Rear: Steel Body, Loose Ball, 14mm Adapter x 180mm Axle, 9T Cassette, 36h, 17mm Nut Spokes: Stainless Steel, 14g Tyres: Front: Innova 20 x 2.2"; Rear: Innova 20 x 2.3" Handlebar: GT Freestyle 2pc., Steel, 8.375"H x 28"W, 3-deg Up, 11-deg Back Stem: GT Top Load, 1-1/8", Cold Forged Cap, 32mm Rise, 40mm Grips: GT Super Soft Flanged 155mm Single Compound w/ GT Removable Plug Headset: 1-1/8" Threadless, Steel Saddle: Railed Seatpost: Alloy, 27.4mm x 200mm Brakes: Aluminium U-Brake w/ Soft Compound Pad Chain: KMC Z410 Bottom Bracket: American Loose Ball Bearing Pedals: GT Low Profile FS Platform Design Please note: this bike is for use on BMX tracks and skate parks. In many countries, it is illegal to use this bike on public roads without using the two independent braking systems provided (a front and rear brake).Buy GT Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
REENGINEERED AND UPGRADED IN PURSUIT OF THE ULTIMATE ROAD COMPETITION SHOE ENGINEERED FIT 360° surround upper provides enhanced instep rigidity and achieves a true glove-like fit Brand new dual BOA® Li2 dials featuring a lower profile and two way micro-adjustability for aerodynamic tuning Refined Dynalast™ to expand fit and comfort Toe box shape refinement to accommodate a wider range of foot shapes FUNCTION SPECIFIC ZONES Combination of non-stretch Kuraray Rovenica Teijin Nanofront and PU laminated mesh ensures optimal foot stabilisation to minimise energy loss OPTIMAL POWER TRANSFER Anti-twist heel cup construction optimises efficiency by enhancing heel torsional rigidity coupled with glass-fibre reinforced heel stabiliser designed to handle high intensity riding Deeper cup-shaped carbon mid-sole provides closer pedal feel and riding efficiency Weight: 235g (size 42) Stiffness rating: 12
Boasting an even thicker tube set than the original to offer even more strength you can rely on, Newly designed cast drop outs with built in chain tensioners and a fresh facelift on the graphics. The incarnate still features the Ultra slim invest cast wishbone for that added strength and stiffness where it's needed and comes with the Shallower pitched seat tube angle to move the bottom bracket forward making the feel of the bike smaller without changing the top tube length. 13” slammed back end with thickened chain stays, top and Down tube gussets for extra strength out the front, a relatively steep head tube angle at 75.5° to keep front-end tricks responsive. United even added removable brake mounts due to popular demand! ###section### Product Specs MATERIAL: 4130 butted and tapered seamless Japanese Sanko tubing HEAD TUBE ANGLE: 75.5° SEAT TUBE ANGLE: 70.25° CHAIN STAY LENGTH: 13" BB HEIGHT: 11.75" WHEEL SIZE: 20" STANDOVER HEIGHT: 8.75" DROPOUT SIZE: 14mm HEADSET TYPE: Integrated BB TYPE: Mid BRAKE MOUNTS: Removable GYRO TABS: NA WEIGHT: 5 lbs ###section### Product Highlights Responsive Geometry with Short Backend and Steep Headtube Best suited to Street and Park riding High-quality Chromoly construction Seamless Japanese Sanko Tubing Strong and durable investment cast dropouts ###shogun-image-section###
The 00 product designation is a uniquely special badge, reserved for only the very best fi'zi:k products. Every 00 saddle is conceived and designed with a no-compromise approach to create the ultimate saddle.The Antares is 1 of fi'zi:k's 3 Spine Concept™ Mens Road Saddle shapes. Of these 3, the Antares shape is wide and slightly curved in profile.The Antares 00 (00 meaning “the top” in Italian) is the top-of-the-line saddle available in this shape. The high-modulus carbon shell with Wing Flex™ and Mobius™ carbon braided rail (NEW for 2016) make this the lightest and most stiff Antares model available. Despite the saddle's very low weight, special 00 foam compound ensures that comfort is not compromised.Antares 00 is for The Chameleon: Medium Spine.If you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders' width apart), you are a chameleon. Your degree of spinal flexibility helps you so far, before you need to rotate your pelvis slightly to achieve fully the performance position.You will benefit from the increased width and slight curvature of the Antares shape.Shell: High Modulus 00 Carbon, Wing Flex™ for freedom of thigh movement,Rail: Mobius™ Carbon Braided 7x9mm,Integrated Clip System: No,Length: 275mm,Width: 142mm,Weight: 140g.
The Crux V2 frame from Stranger Features a new, shorter rear end than its predecessor and integrated chain tensioners while maintaining the same tried and tested 4130 chromoly tubing and construction methods used on the original Crux frame and features top and down tube gussets, intergrated seat clamp, thick 5mm dropouts, keeping the price down without sacrificing strength. ###section### Product Specs MATERIAL: Full 4130 Chromoly HEAD TUBE ANGLE: 75.5° SEAT TUBE ANGLE: 70° CHAIN STAY LENGTH: 12.8" BB HEIGHT: 11.5" WHEEL SIZE: 20" STANDOVER HEIGHT: 9" DROPOUT SIZE: 14mm HEADSET TYPE: Integrated BB TYPE: Mid BRAKE MOUNTS: Brakeless GYRO TABS: N/A WEIGHT: 5.21lbs ###section### Product Highlights Responsive Geometry with Short Backend and Steep Headtube Best suited to Street and Park riding High-quality Chromoly construction Gusseted tubing for added strength Built in chain tensioners ###shogun-image-section###
Keeping your momentum flowing across unpredictable MTB trails, this seat post features a tough aluminium construction. This makes it more than capable of handling all the knocks and bumps from riding across rocky terrain conditions at speed. Crankbrothers has also equipped this trail-ready seatpost with Igus bearings and a high-quality Jagwire cable, which allows you to benefit from its smooth and dependable operation. Manufacturer Part Numbers: 31.6mm, 100mm: CRB-16379 30.9mm, 150mm: CRB-16382 30.9mm, 125mm: CRB-16380 31.6mm, 170mm: CRB-16385 31.6mm, 150mm: CRB-16383 30.9mm, 100mm: CRB-16378 31.6mm, 125mm: CRB-16381 30.9mm, 170mm: CRB-16384
An all-new starter bike, the Air 20 has been engineered to the same level of detail and design as the pro models, mirroring the sizing and geometry for a top-end experience from a beginner-level BMX. The Air raises the bar when it comes to learning the ropes and is well equipped for many years of developing your BMX riding style and increasing your confidence and ability. Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
The Sidi Zero 2 road shoe will help you conquer winter, with a GORE-TEX® membrane and an internal gusset to keep the elements at bay. The Microfibre Microtech upper has been combined with a water-repellent and breathable lining to keep feet dry. The carbon injected sole provides stiffness and has mounting options for Shimano SPD-SL cleats and three-bolt cleats. The anti-slip heel pads are replaceable and make walking an easy task. Sidi’s Techno-3 dial and Velcro straps ensure an exacting, comfortable fit. Key Features:Microfibre Microtech, mesh upper,GORE-TEX® water-repellent and breathable lining,Millennium 5 Sole injected carbon fibre into a Nylon matrix,Tecno-3 closing system,Velcro strap closure on the front of the shoe and ankle,Heel cup,Anti-slip replaceable heel pad,Internal gusset to protect from wind and water,Compatible with Shimano SPD-SL cleats and three-bolt cleats.
Assos MILLE GT Cycling Long Bib Shorts GTO C2Sitting at the peak of the Assos Mille line, the MILLE GT Cycling Long Bib Shorts GTO C2 offer unrivalled levels of muscle support and flexibility. They're a peerless match for your longest of days in the saddle.A quantum leap forward in performance, the MILLE GT Cycling Long Bib Shorts GTO C2 have been engineered from the ground up to offer the finest level of support, flexibility and comfort on long bike rides. A radical reshaping of panels and advanced fabrics enhance muscle support while tapered leg panels give an almost custom fit, tuned to your physique. Ossidia textile - Muscle-supporting CompressionUsed across the lower back and thighs, Assos' Ossidia textile gives a smooth and compressive fit, helping promote blood flow, push back fatigue and maintain all-day comfort. The highly elastic ultrathin yarns also deliver a second-skin fit with outstanding flexibility and a high degree of breathability. UPF 50+ also protect you from the sun. Meanwhile, the front panel uses LOSANGA. This material ensures there's less pressure around your sensitive areas, enhancing comfort on long days in the saddle. Wrapped in ComfortThe GTO straps and leg panels feature Assos' rollBar and one-piece Butterfly panel construction. This offers extra stability and support. Each leag panel also features louvreTec darted construction, delivering a custom, compressive hold of your thighs. At the ends of the thighs, the raw-cut skinGrip finish, with minimal silicone grip, prevents your shorts from riding up while also exerting minimal pressure. A raw-cut waist also delivers a pressure-free and smooth fit. MILLE GTO C2 InsertUsing their stitch-free goldenGate technology and reversed seams, the MILLE GTO C2 Insert is honed for long-distance cycling comfort. The front features Assos' sunDeck superlight - a successor to their iconic kukuPenthouse - made using an ultrasoft foam-free textile to form a preshaped cup that both supports the male anatomy and promotes maximum ventilation.The pad also features the twin21 System made of three separate layers. Firstly an 11mm of lightweight microShock foam gives shock absorption. Next 10mm of lower-density matrix foam. This is sandwiched between the microShock and the 3D waffle outer to fully absorb micro-vibrations. The 3D waffle itself is a 3-layer perforated foam that increases breathability and eliminates excess weight.Features:Materials: 53% Polyamide, 30% Polyester, 17% ElastaneWarp-knit of OSSIDIA fabric for compressive holdLOSANGA front panels - remove pressure in a sensitive arearollBar and one-piece Butterfly panel constructionGTO straps and leg panelszeroWaist raw-cut, tape-reinforced edge, for the smoothest transition between shorts and skin/base layersuperFlat X-FRAME - single section of elastic material - folded over on itself - forming a supportive X-frame that delivers limited vertical stretch in the rearskinGrip raw-cut edge with minimal silicone treatment secures the shorts in placeMILLE GTO C2 InsertLong Length - leg length 3cm longer than standard versionBuy Assos Cycle Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
The new Mavic E-Speedcity wheels are made to last and endure on an e-bike or a muscular bike because we know there is nothing worse than being stopped by a mechanical issue on your way to or from work. For bikes with 700C/28'' wheels. The new Mavic E-Speedcity celebrates Mavic's comeback into the world of commuter bikes after designing fenders in the early days of the company.We've put 130 years of experience at the highest level of cycling to design the right wheel for your daily commutes.The wheels are built strong and durable.The 32 solid j-bent spokes coupled with high flange hubs enable a maximum load capacity of 180kg (25% higher than the usual Mavic road wheels) to takeinto consideration the extra weight and loads involved by daily commutes.Our e-mtb proven freewheel mecanism with automatic bearing preload perfectly handles the most powerfull ebike motors (up to 120Nm motor torque). Their smoothness saves effort from both the motor and the rider.Our years of experience in wheelbuilding are a guarantee for a stable built over long mileage so you don't lose any time in the workshop.Because we all care about our environment and aim at reducing our carbon footprint the aluminum alloy used to produce those rims is made of 90% of recycled aluminum. Also those wheels are handbuilt in Europe with components 100% sourced from Europe.This 700 version is 25mm wide and can be used with tyres up to 64mm.Last but not least we care about your safety and that of your bikes. Those wheels are discreet so as to not arouse covetousness but their black reflective stickers glow at night to keep you visible in the traffic.They are eligible to our Mavic Care program which includes a free 3rd year of warranty a crash replacement policy and the availability of spare parts for over 5 years. Key benefits Sturdy and durable 32 solid j-bent spokes handbuilt in Mavic's factory in Europe Strong freewheel mecanisme handles motor torque up to 120Nm Smooth durable bearings saves muscular and electric power Keeping you and your bike safe and sound 700 diameter is compatible with wide comfy tyres (up to 64mm) Black reflective stickers are discreet but glow at night Maximum load weight: 180kg Environment friendly Rims made of 90% of recycled aluminum Manufactured in Europe with components 100% made in Europe Specifications DELIVERED WITH User guide Rims Tire: UST Tubeless and tubetype Material: S6000 Aluminum Valve hole diameter: 65 mm Disc brake specific profile Height: 21 mm Drilling: traditional Joint: sleeved UST Tubeless Ready ETRTO size 29: 622x25TSS Internal width: 25 mm Hookless profile E-Bike specific rim profile Spokes Lacing: front and rear crossed 3 Material: steel Nipples: steel ABS Count: 32 front and rear Shape: j-bent round 20 straight gauge Delivered with User guide Intended use Recommended tire sizes: 28 to 64 mm (11 to 25) ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 180kg E-bike included Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 freewheel technology Rear: Quick Release 12x142 and 12x135 compatible Front: Quick release 12x100 and 15x100 through axle compatible QRM Auto bearing preload technology Hub available for Center Lock brake rotors only Compatibility Freewheel: Shimano/Sram convertible to Campagnolo ED11 N3W and XD-R with optional driver bodies Rear axle: 12mm thru axle convertible to Quick Release with optional adapters and axle replacement Front axle: 12mm thru axle easily convertible to quick release with optional adapters Convertible to 15mm with complete axle replacement Versions Disc standard: Center Lock® only Freewheel: Shimano/Sram Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release (V2680301) 15mm axle (V2373501) 12mm front hub cap (V2680501 - Delivered with the wheel) 12x142 rear axle adapters (V2510701 - Delivered with the wheel) ID360 XD-R freewheel body (V2580101) ID360 Shimano / Sram freewheel body (V3430101 - Delivered on the wheel) Non-Boost : 12x135 rear axle adapters (V2510901) ID360 Shimano Micro Spline alloy freewheel body (V3990101) 12 to 9mm rear adapter for quick release (V2510801 (with axle V2373401)
The new Mavic E-Speedcity celebrates Mavic's comeback into the world of commuter bikes after designing fenders in the early days of the company.We've put 130 years of experience at the highest level of cycling to design the right wheel for your daily commutes.The wheels are built strong and durable.The 32 solid j-bent spokes coupled with high flange hubs enable a maximum load capacity of 180kg (25% higher than the usual Mavic road wheels) to takeinto consideration the extra weight and loads involved by daily commutes.Our e-mtb proven freewheel mecanism with automatic bearing preload perfectly handles the most powerfull ebike motors (up to 120Nm motor torque). Their smoothness saves effort from both the motor and the rider.Our years of experience in wheelbuilding are a guarantee for a stable built over long mileage so you don't lose any time in the workshop.Because we all care about our environment and aim at reducing our carbon footprint the aluminum alloy used to produce those rims is made of 90% of recycled aluminum. Also those wheels are handbuilt in Europe with components 100% sourced from Europe.This 650B version will be perfect for the newest SUV type of bicycle : the 30mm internal rim width fits tyres up to 76mm/3.0'' and integrates our unique Pinch Flat Protection upper rim wall shape to reduce risks of flats by 20% when rolling over obstacles curbs potholes and eveyrthing the city will throw at you.Last but not least we care about your safety and that of your bikes. Those wheels are discreet so as to not arouse covetousness but their black reflective stickers glow at night to keep you visible in the traffic.They are eligible to our Mavic Care program which includes a free 3rd year of warranty a crash replacement policy and the availability of spare parts for over 5 years. Key benefits Sturdy and durable 32 solid j-bent spokes handbuilt in Mavic's factory in Europe Strong freewheel mecanisme handles motor torque up to 120Nm Smooth durable bearings saves muscular and electric power Keeping you and your bike safe and sound 650B diameter is compatible with wide comfy tyres (up to 76mm) and integrates the PFP flat reduction system Black reflective stickers are discreet but glow at night Maximum load weight: 180kg Environment friendly Rims made of 90% of recycled aluminum Manufactured in Europe with components 100% made in Europe Specifications DELIVERED WITH User guide Rims Tire: UST Tubeless and tubetype Material: S6000 Aluminum Valve hole diameter: 65 mm Disc brake specific profile Height: 21 mm Drilling: traditional Joint: sleeved UST Tubeless Ready Hookless profile Internal width: 30 mm E-Bike specific rim profile Pinch Flat Protection sidewall (minimizes the risk of tire cuts and punctures) ETRTO size 275: 584x30TC Spokes Lacing: front and rear crossed 3 Material: steel Nipples: steel ABS Count: 32 front and rear Shape: j-bent round 20 straight gauge Delivered with User guide Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 freewheel technology Rear: Quick Release 12x142 and 12x135 compatible Front: Quick release 12x100 and 15x100 through axle compatible QRM Auto bearing preload technology Hub available for Center Lock brake rotors only Intended use Recommended tire sizes: 50mm to 76mm (20 to 30) ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 180kg E-bike included Compatibility Freewheel: Shimano/Sram convertible to Campagnolo ED11 N3W and XD-R with optional driver bodies Rear axle: 12mm thru axle convertible to Quick Release with optional adapters and axle replacement Front axle: 12mm thru axle easily convertible to quick release with optional adapters Convertible to 15mm with complete axle replacement Versions Disc standard: Center Lock® only Freewheel: Shimano/Sram Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release (V2680301) 15mm axle (V2373501) 12mm front hub cap (V2680501 - Delivered with the wheel) 12x142 rear axle adapters (V2510701 - Delivered with the wheel) ID360 XD-R freewheel body (V2580101) ID360 Shimano / Sram freewheel body (V3430101 - Delivered on the wheel) Non-Boost : 12x135 rear axle adapters (V2510901) ID360 Shimano Micro Spline alloy freewheel body (V3990101) 12 to 9mm rear adapter for quick release (V2510801 (with axle V2373401)
Ideal for anyone in need of a pack with a fine-tuned fit, the Osprey Aether Plus 70 Backpack is suitable for a variety of body shapes and sizes. Custom Fit-on-the-Fly™ shoulder straps, hip-belt and adjustable torso length offer an adaptable, comfortable fit, while an injection-moulded AirScape™ back panel delivers breathable, close-to-body performance. Perfect for longer, overnight adventures, the spacious design features multiple compartments and pockets, including external hydration access, an area for your sleeping bag and a detachable Daylid™ that converts into a daypack. Compression straps also help to limit the bulk so you can move with ease, and dual ice/pole attachments ensure you are ready for whatever the terrain has to throw at you. Additionally, it is made with Bluesign®-approved nylon and a PFC-free Durable Water Repellent coating.