Engineered for the demands of road cycling, this 12 speed rear derailleur features the technology that modern riders demand. SRAM has equipped this model with a rock-solid aluminium cage with steel pulley bearings, so you'll benefit from the best balance of strength, durability and performance on every mile of road. SRAM AXS Enabled Road Bike Rear Derailleur This rear derailleur is low on complexity, but rich with features. SRAM has equipped it with its renowned AXS wireless technology, which allows for easy personalisation and control on your road bike. Thanks to its eTap shift logic, it delivers intuitive shifting, easy setup and reliability that has been proven at the highest levels. AXS technology means personalisation is in your hands. The precision and reliability of 12-speed eTap AXS, now at a whole new level. On any surface you can imagine, in any drivetrain configuration, the Rival eTap AXS rear derailleur will handle it. Secure chain management and fast, precise shifting make for a smooth and quiet ride, every time. - Wireless electronic eTap shift logic for intuitive shifting, easy setup and reliability - Compatible with both 1x and 2x drivetrains - 36t cog max derailleur works with 10-28, 10-30, 10-33, and 10-36 cassettes - SRAM AXS enabled, allowing easy personalisation - Chain management keeps the drivetrain quiet and secure - X-SYNC pulleys for increased durability and efficiency Technologies: AXS Enabled: AXS is SRAM’s bike component integration system that connects electronic bicycle components and software. Control: AXS lets you connect your AXS-enabled components to a mobile app, where you can assign custom actions to your controls. Everything speaks the same language, and you can even combine road and mountain bike parts to build the party bike of your dreams. Personalise: Wireless controls open the door to new levels of customisation. With AXS, you can personalise your component behavior to match your riding style and preferences. Turn on enhanced shifting modes, or reassign shifting actions. Measure: The AXP Mobile App and AXS Web allow you to monitor your bike’s performance and readiness. It’s an easy way to keep tabs on your battery levels—including the CR2032 batteries in eTap shift levers—and keep AXS component firmware up-to-date. AXS Web analyses your ride files specific to shifting, gear use, power zones, and tyre pressure, so that you can quickly and easily learn more about how your bike is working for you and consider adjustments.
SRAM Rival eTap AXS 12 Speed Rear DerailleurBenefitting from wireless electronic eTap shift logic, this 12 speed rear derailleur provides intuitive shifting, easy setup and reliability on your road bike. SRAM has also equipped this model with a rock-solid aluminium cage with steel pulley bearings, so you'll benefit from the best balance of strength, durability and performance on every mile of road. SRAM AXS Enabled Road Bike Rear DerailleurThis rear derailleur is low on complexity, but rich with features. SRAM has equipped it with its renowned AXS wireless technology, which allows for easy personalisation and control on your road bike. Thanks to its eTap shift logic, it delivers intuitive shifting, easy setup and reliability that has been proven at the highest levels. AXS technology means personalisation is in your hands.The precision and reliability of 12-speed eTap AXS, now at a whole new level. On any surface you can imagine, in any drivetrain configuration, the Rival eTap AXS rear derailleur will handle it. Secure chain management and fast, precise shifting make for a smooth and quiet ride, every time.- Wireless electronic eTap shift logic for intuitive shifting, easy setup and reliability- Compatible with both 1x and 2x drivetrains- 36t cog max derailleur works with 10-28, 10-30, 10-33, and 10-36 cassettes- SRAM AXS enabled, allowing easy personalisation- Chain management keeps the drivetrain quiet and secure- X-SYNC pulleys for increased durability and efficiencyFeatures: Cage Material: Aluminium Pulley Bearings Material: Steel Use: Road Speed: 12 speed Cage: Medium cage Max Tooth: 36 Battery Included: Not included, battery available separatelyTechnologies: AXS Enabled: AXS is SRAM's bike component integration system that connects electronic bicycle components and software. Control: AXS lets you connect your AXS-enabled components to a mobile app, where you can assign custom actions to your controls. Everything speaks the same language, and you can even combine road and mountain bike parts to build the party bike of your dreams. Personalise: Wireless controls open the door to new levels of customisation. With AXS, you can personalise your component behavior to match your riding style and preferences. Turn on enhanced shifting modes, or reassign shifting actions. Measure: The AXP Mobile App and AXS Web allow you to monitor your bike's performance and readiness. It's an easy way to keep tabs on your battery levels—including the CR2032 batteries in eTap shift levers—and keep AXS component firmware up-to-date. AXS Web analyses your ride files specific to shifting, gear use, power zones, and tyre pressure, so that you can quickly and easily learn more about how your bike is working for you and consider adjustments.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The SRAM Force 1 rear derailleur adopts all the technologies of SRAM 1x™ MTB to provide the fastest, quietest 1x11 shifting available. SRAM's unique clutch system eliminates chain slack, providing for smoother, quieter, and more secure chain travel.Key Features:EXACT ACTUATION™ for fast and accurate shifts using SRAM's 1:1® actuation ratio (shifter cable travel: derailleur movement),X-SYNC™ pulley features a 12-tooth design that helps control the chain's lateral movement,ROLLER BEARING CLUTCH™'s one-way roller clutch controls chain tension for consistent shifting,X-Horizon™ straight parallelogram design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force,Cage Lock™ technology makes for fast wheel changes or chain installation,A dedicated SRAM 1x™ rear derailleur.
SRAM XX1 Type 2.1 11sp Rear DerailleurWith its “horizontal parallelogram” design and pulley offset, X-Horizon keeps the chain gap constant across all 11 gears, providing fast, precise shifts. By limiting all movement to the horizontal axis, this design is faster, reduces shift force and eliminates ghost shifting.Roller Bearing Clutch technology reduces bounce and chain slap. Cage Lock technology makes wheel removal and installation easier than ever before. Paired with the XX1 shifter, the X-Horizon RD forms the backbone of X-Actuation technology for unbelievably smooth shifting action. With Cage Lock technology in the rear derailleur, wheel removal and installation—as well as chain installation—becomes faster and simpler. Just pushing the cage forward to create slack and lock it into place Roller Bearing Clutch rear derailleurs deliver maximum drivetrain stability—even through the most punishing terrain. With Roller Bearing Clutch technology, derailleur bounce and chain slap are eliminated without sacrificing precision X-Actuation: Developed specifically for SRAM 1X, X-ACTUATION keeps shifting sharp and consistent across the entire 10- to 42-tooth cassette The X-Horizon rear derailleur’s ‘straight parallelogram’ design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force. For quicker, more exact shifting, the large upper pulley offset design maintains a constant chain gap across all gears SRAM X-Sync 1X chainrings provide the highest level of performance and durability. The SRAM X-Sync tall square teeth edges engage the chain earlier than traditional triangle shaped teeth. The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-Sync chainrings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-Sync rings are an integral part of the SRAM 1X drivetrainFeatures: Speeds: 11 Speed Weight: 245g Compatibility: X-Actuation, XX1 11 Speed Pulleys: 12T X-Sync pulley wheelsBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
By limiting all movement to the horizontal axis, this design is faster, reduces shift force and eliminates ghost shifting. By eliminating unwanted chain movement, X-Horizon shifts faster, puts an end to ghost shifting and reduces shift force and chain slap. And with Cage Lock technology, wheel removal and installation are easier than ever. Cage Lock With Cage Lock technology in the rear derailleur, wheel removal and installation, as well as chain installation, becomes faster and simpler. Just pushing the cage forward to create slack and lock it into place. Roller Bearing Clutch Features Roller Bearing Clutch (RBC) rear derailleurs deliver maximum drivetrain stability—even through the most punishing terrain. With RBC technology, derailleur bounce and chain slap are eliminated without sacrificing precision. X-Actuation Developed specifically for SRAM 1X, X-Actuation keeps shifting sharp and consistent across the entire 10 to 42-tooth cassette. X-Horizon The X-Horizon rear derailleur’s ‘straight parallelogram’ design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force. For quicker, more exact shifting, the large upper pulley offset design maintains a constant chain gap across all gears. X-Sync SRAM X-Sync 1X chain rings provide the highest level of performance and durability. The SRAM X-Sync tall square teeth edges engage the chain earlier than traditional triangle shaped teeth. The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-Sync chain rings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-Sync rings are an integral part of the SRAM 1X drivetrain.
Motivated to Ride. Whatever the Weather. The MILLE GT ULTRAZ Winter Jacket EVO gives you the extra motivation you need to face into the colder and damper weather conditions of winter training. It all starts with the unique and highly functional fabric mix. At the front and upper back, windproof NEOS Light textile is deployed. This lightweight 3-layer softshell features a PU bonded membrane, offering total wind protection and a high degree of water resistance. Snow, rain, road spray and biting winds are all easily fended off. Cold Out. Warm in. With the elements kept out, Assos turned to the job of keeping warmth inside. On the inside of the GT Ultraz is their soft and fleecy RX Heavy. This insulates you against the cold but just as importantly it allows sweat to escape. After all, it's no good being protected from the elements if you then get damp on the inside when cycling. To the back, 3-layer NEOS Medium fabric adds even more warmth to your ride.The sleeves use Assos' two-layer twinDeck construction, a protective outer matched with an insulating inner. And at the cuff, you’ll notice these two materials aren’t sewn together, which lets your gloves seamlessly integrate between the layers for streamlined comfort. As you'd expect of an Assos garment, the attention to detail, fabric choice and tailoring are all first-class. Warm and weather protective, while also breathable, this is a jacket to keep you on your bike and enjoying the outdoors when deep winter arrives.
SRAM X01 Type 2.1 11 Speed Rear DerailleurThanks to its “horizontal parallelogram” design, X-HORIZON can keep the chain gap the same across all 11 gears. By taking vertical movement out of the equation, this design doesn’t just make shifting faster—it reduces shift force and eliminates ghost shifting.Features: Cage Lock: The first rear derailleur of its kind, SRAM Type 2.1 lets you push your cage forward and lock it into place with the push of a button. This creates slack, removing all tension from the chain. With Cage Lock, Type 2.1 makes wheel removal and installation—as well as chain installation—easier than any other derailleur on earth. Just push the cage forward—creating slack—and lock it in place. The chainstays perfectly loose, letting the derailleur swing out of the way. When you’re ready to ride again, simply unlock the cage and go Roller Bearing Clutch: Designed for X0 and X9 families, the Roller Bearing Clutch eliminates derailleur bounce and chain slap without sacrificing precision. The maintenance free clutch design accurately controls chain tension and creates smooth, reliable performance and consistent shifting accuracy. X-Actuation: Developed specifically for SRAM XX1, X-ACTUATION keeps shifting sharp and consistent across the entyre 10-42T cassette X-Horizon: This XX1 rear derailleur’s “straight parallelogram” design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force. For quicker, more exact shifting, the large upper pulley offset design maintains a consistent chain gap across all gears X-Sync: A CNC-machined, “wide tooth, narrow tooth” pattern is repeated around the entyre XX1 chainring, perfectly mirroring the 1X11 XX1 specific chain’s inner and outer links for maximum controlSpecifications: Speeds: 11-speed Material: Inner Cage: Alloy; Outer Cage: Carbon Fibre Weight: 252g Compatibility: 1X11 Capacity: 32T Pulleys: 12-tooth X-SYNC pulley wheelsBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
By taking vertical movement out of the equation, this design doesn’t just make shifting faster—it reduces shift force and eliminates ghost shifting. By eliminating unwanted chain movement, X-Horizon shifts faster, puts an end to ghost shifting and reduces shift force and chain slap. And with Cage Lock technology, wheel removal and installation are easier than ever. Cage Lock With Cage Lock technology in the rear derailleur, wheel removal and installation, as well as chain installation, becomes faster and simpler. Just pushing the cage forward to create slack and lock it into place. Roller Bearing Clutch Features Roller Bearing Clutch (RBC) rear derailleurs deliver maximum drivetrain stability—even through the most punishing terrain. With RBC technology, derailleur bounce and chain slap are eliminated without sacrificing precision. X-Actuation Developed specifically for SRAM 1X, X-Actuation keeps shifting sharp and consistent across the entire 10 to 42-tooth cassette. X-Horizon The X-Horizon rear derailleur’s ‘straight parallelogram’ design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force. For quicker, more exact shifting, the large upper pulley offset design maintains a constant chain gap across all gears. X-Sync SRAM X-Sync 1X chain rings provide the highest level of performance and durability. The SRAM X-Sync tall square teeth edges engage the chain earlier than traditional triangle shaped teeth. The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-Sync chain rings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-Sync rings are an integral part of the SRAM 1X drivetrain.
With the new Ultegra R8050 rear derailleur shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the front or rear derailleur to instantaneously select the correct gear. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.Compatible with 11-speed Di2 systems, this derailleur is made from high tolerance cold forged aluminium for incredible durability and a longer lifespan. Benefiting from a low-profile shadow design construction that reduces the risk of damage in the event of a crash, this derailleur also remains more aerodynamic on the bike, sitting poised and perfectly placed to flick between your preferred gear. A low friction shifting action guaranteed by four self-lubricating micro-machined fluorine coated link pivot bushings, you can be sure of joy each time you switch your gear.Low profile shadow design constructionHigh tolerance cold forged aluminium link platesSS Cage: Compatible with 11-25T Up To 11-30TGS Cage: Compatible with 11-28T Up To 11-34TWeight: 242g (SS Type), 249g (GS Type)
With the new Ultegra R8050 rear derailleur shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the front or rear derailleur to instantaneously select the correct gear. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.Compatible with 11-speed Di2 systems, this derailleur is made from high tolerance cold forged aluminium for incredible durability and a longer lifespan. Benefiting from a low-profile shadow design construction that reduces the risk of damage in the event of a crash, this derailleur also remains more aerodynamic on the bike, sitting poised and perfectly placed to flick between your preferred gear. A low friction shifting action guaranteed by four self-lubricating micro-machined fluorine coated link pivot bushings, you can be sure of joy each time you switch your gear.Low profile shadow design constructionHigh tolerance cold forged aluminium link platesSS Cage: Compatible with 11-25T Up To 11-30TGS Cage: Compatible with 11-28T Up To 11-34TWeight: 242g (SS Type), 249g (GS Type)
The updated low-profile "Shadow" design of the Shimano Ultegra R8050 rear derailleur increases its shift stability and gives it a sleek and integrated appearance. Race endurance is guaranteed, through the optimised slant angle. The wide cassette compatibility of 11-28 tooth to 11-34 tooth will secure a smooth ride in even the highest and steepest mountain areas.
Shimano Ultegra R8050 Di2 Rear Derailleur (GS)The Shimano Ultegra R8050 Di2 Rear Derailleur (GS) will help you maintain race concentration through intuitive shift control. The updated low-profile design of Shimano Shadow RD increases its shift stability and gives the rear derailleur a sleek and integrated appearance. Race endurance is guaranteed, through the optimised slant angle. The wide compatibility of two specific rear derailleurs (SS for cassettes 11-25T to 11-30T and GS 11-28T to 11-34T) will secure a smooth ride in even the highest and steepest mountain areas.Features: Speed: 11-Speed Compatibility: All Shimano Di2 E-Tube road 11-Speed drivetrains Model Number: RD-R8050 Series: Ultega Di2 Maximum Sprocket: 30T Minimum Sprocket: 11T Maximum Front Difference: 16T Weight: 242g (SS type), 249g (GS type)A 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.