The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The new Shamal Ultra C17 represents the same fantastic performance that has made it THE go-to aluminium race wheel for the better part of two decades while adding even more versatility and performance. The new, wider profile means the C17 standard is perfect for use with the increasingly popular 25/28mm tyre sizes. USB Bearings are ceramic which vastly reduces the weight and greatly improves the smoothness of the bearings. The ceramic ball bearings inside also mean that maintenance will be far less common and it has a much higher resistance to corrosion than standard bearings. The Mega-G3 Spoke pattern is a type of spoke assembly that improves energy transfer between the hub, which reduces stress on the right-hand side which in turn increases the rigidity of the wheel. This is achieved by having twice as many spokes as the left-hand side. The new C17 also allows for a more sure-footed grip in addition to increased comfort while increasing rigidity and thus reactivity at the same time thanks to its wider stance and optimized material usage. Features: Toroidal Milling reduces the peripheral weight of the rim for great reactivity Dynamic Balance where every point of the rim is counterbalanced by an equal weight on the opposite side Ultra-Fit for easy tyre mounting and improved performance for clincher tyres MOMAG: the external rim profile is free of holes, so the structural integrity of the wheel is increased and there is no need for rim tape Differentiated rim height, 27mm front & 30mm rear for optimized structural integrity and performance Carbon hub with USB bearings, aluminium axle Aerodynamic aluminium spokes with exclusive Mega-G3 spoke pattern Weight: 1449g Tech Specs: Spokes Spoke Count: 16 Front and 21 (G3) Rear RDB - Rim Dynamic Balance Aerodynamic Double-Butted Aluminium spokes Ultraliner / DRSC Geometry Self-Locking Aluminium nipples Rims Profile Height: Differentiated (24/27mm at the front - 27/30mm at the rear Material: Aluminium Rim Section: (Height/width): differentiated/22mm Tyre fitment - Clincher with inner tubes Hubs Carbon and aluminium hub USB bearings Width: 100mm (Front) / 130mm (Rear) Oversize flange Cup-and-cone bearing system Freehub: CA 9/10/11/12x, SH 11x or 9/10x with spacers In The Box: New, re-designed quick-release skewers User Manual Warranty Booklet Campagnolo Wheel Identification Card
Vision TC 30 is the newest range of light and versatile carbon racing wheels, with a 30mm rim depth in disc brake format. They have been developed using extensive wind tunnel testing and on the road with professional cyclists of our sponsored teams, offering a great balance of performance and light weight at a competitive price.Full Carbon 30mm depth rim,Tubeless ready - clincher,Centerlock rotor mount,6 sealed cartridge bearings (2F + 4R),J-Bend spokes 24F / 24R,TA-12 and X-12,Artisan built, entirely by hand,Includes rim tape (clincher), spoke protector.FREEHUBAlloy freehub,Shimano 10-11sp,SRAM XDR.ADAPTERSFront - QR and TA-15 (available separately),Rear - QR (available separately).
The new DT Swiss performance carbon wheels are the ultimate racing wheelsets. They rely on DT s huge experience in manufacturing every single component of a wheel, as well as employing state of the art technology in doing so. The bespoke carbon rims are manufactured using a method developed by DT to ensure continuous carbon fibres are aligned with the forces passing through the wheel, increasing strength and stiffness in use without adding weight.DT's Spline series 240 ratchet hubs have long been a byword for reliability and low weight and the spline spoke mounting has been revised to allow improved bracing angles, improving lateral stiffness for no additional weight, a fast-engaging 36-tooth ratchet completes a premium package. For those looking to use the latest tyre tech the PRC 1400's come tubeless ready but can also be used with standard clinchers.Bespoke carbon rimsTubeless ready 18mm (Internal), 35mm (Height) carbon rimSpokes: DT Aerolite straight pullHub type: 24011 Speed Shimano/SRAM compatibleRecommended system rider weight: 110kgWeight: 658g (Front) 828g (Rear)Includes: Tubeless ready tape, Tubeless valve and DT RWS Eco Skewers, Swissstop Black Prince brake pads, Valve guard, Spacer for 10 speed cassette