With an easy to fit attachment, the Ydun 5.5 Cabin attaches to the Ydun tent to provide a cosy sleeping area, allowing you to enjoy camping adventures even more. A two layered door produced with a cotton fabric and mesh locks in warmth while providing just enough ventilation and with windows, you can view the sunrise from the comfort of your sleeping bag. The YKK zippers are ultra-tough and a mosquito net will keep the bugs away.
Extend the life of your Nordisk Thrymheim 3 Tent (sold separately) with the matching Thrymheim 3 Footprint. Not only does the footprint protect your tent, adding years to its durability, but it also converts an outside storage area to a proper living area, by providing a clean and waterproof floor. With this, your porch just turned into a living room. Another underrated feature of the footprint is directing the moisture from the ground to go around your flysheet. This removes 90% of condensation from the inside of your sleeping cabin, leaving you with a dry and comfortable indoor climate, no matter the conditions outside.
Housing 3 people with ease, the Alfheim 12.6 Cabin allows you to relax in comfort and luxury after a long day of exploration and camping fun. Sitting inside the Alfheim 12.6 Tent, the cabin features a two layered door to seal the cold away, windows in cabins with mosquito nets and attachment points that simply hook onto the inside of the tent, ready for high end camping.
Weight: Presta 50mm 18c-28c: 105g Presta 50mm 28c-47c: 150g Presta 40mm18c-28c: 105g Presta 40mm28c-42c: 150g Presta 50mm 18c-28c: 150g Presta 60mm 18c-28c: 105g Presta 40mm 28c-32c: 115g Presta 60mm 28c-45c: 150g Schrader 40mm 28c-42c: 150g Schrader 40mm 18c-28c: 105g
This high-quality Schwalbe 16" inner tube features superb reliability and is ready for anything your local roads can throw at it. Plus, as it's made to suit a wide range of tyre sizes, it can also be used on bikes with 18" wheels too. Schwalbe inner tubes are put through a rigorous testing process to ensure consistently high performance. Size / ETRTO: 16x1 3⁄8" / 37-340 16x1.1" / 28-349 16x1.35" / 35-349 16x1.4" / 37-349 18x1.1" / 28-355 18x1.35" / 35-355
These tubes are lighter than standard tubes to assist with reducing overall weight.
This inner mountain bike tube has been built for any high-impact race you can throw at it, and is 100% recyclable if you decide to replace it.
Extremely reliable! Quality control for safer cycling: Each tube is checked twice at the factory to ensure safer cycling. Having the correct pressure means fewer punctures and reduced rolling resistance.
Designed for Fatbikes tyres (3.5" - 4.8"), the butyl rubber compound prevents pressure loss and comes with a 40mm Presta valve.
Extremely air-tight! Less air loss means having to inflate less. A unique rubber mixture makes it possible. Extremely reliable! Each SCHWALBE tube is individually examined twice at the factory to ensue air-tightness. Special quality control that prevents unpleasant surprises.
A streamlined MTB inner tube with the same great quality durability
Off-road: Riding at lower pressure means better performance ... but at the same time, it increases the risk of failures. The limit so far is at about 20 psi, below which it’s hardly possible to dare to ride normal MTB tyres. But nothing stays the same: In the future, air pressure can be controlled in the tyre‘s double chambers. In the outer chamber, the air pressure is extremely low - ideal for maximum off-road performance. In the inner chamber, directly on the rim, there is high air pressure – even a very strong impact cannot dent the rim edge. At the same time, the inner high-pressure system secures the tyre onto the rim. “Burping”, the dreaded loss of air at low pressure in conventional tubeless systems, is impossible. The Name PROCORE is derived from "Progressive Core". The core (internal high-pressure chamber) progressively absorbs even the hardest impacts. Compatibility You can mount Procore with any tubeless compatible MTB tyre. The system is available for all three MTB wheel sizes (26", 27.5", 29"). Weight approx. 200g per wheel. Compatible with all wheels, independent of the brand. Minimum inner rim width: 23mm. PROCORE is a joint development of SCHWALBE and SYNTACE. PROCORE - the outer chamber The outer chamber is tubeless. Therefore, any tubeless compatible MTB tyres can be used. The tyre is filled with some liquid sealant (approx. 60ml) and should be at least 57mm (2.25") wide. PROCORE - the inner chamber Two special Procore components form the inner high-pressure chamber: the special Procore tube and the Procore inner tyre. This "core" is extremely high-pressure stable and at the same time very light. The Rim Of course, the rim must be tubeless compatible and sealed with a tubeless rim band. It should have an inner rim width of at least 23mm. The wider the rim, the easier the installation and the better the performance under low air pressure. The very wide Syntace rims are a perfect fit. The PROCORE Valve The patented dual valve of the Procore tube distributes the air into both chambers. The upper part of the valve is a selector. With a simple turn, you select whether air is pumped into the inner or the outer chamber. (Valve sold separately). The PROCORE Air Guide The small red component made of white plastic ensures that the air can flow past the inner high pressure chamber into the outer low pressure chamber. - Tyre pressure can be reduced to a minimum 14 psi, thus providing a huge amount of grip. Even on the roughest terrain tyres “stick” to the ground. - Due to the extra cushioning and traction there is much better steering, braking and traction control. - No more risk of snake bites. The rims are extremely well protected from denting. - Even in the toughest conditions, significantly lighter tyres can be used. - Excellent emergency running characteristics due to the internal high-pressure air chamber.