The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride. The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride. The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
Since 1994, Thomson has produced patented bike components, specializing in seatposts, stems, and collars, and shipping over 120,000 parts a year to more than 30 countries. Masterpiece: The Premium. It combines incredibly light weight with the characteristic strength and function of a Thomson. Masterpiece seatposts weigh approximately 40 grams less than an Elite seatpost of the same size, while maintaining high strength and durability. Key Features: The Masterpiece is Thomson's ultimate seatpost. The weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson are able to hold closer tolerances by machining than by extrusion alone. Machining all over an already beautiful design makes the Masterpiece Seatpost a work of art. The tube and head of the Thomson Masterpiece seatpost is integral-machined from one single piece of high strength 7000 series aluminium. Thomson accomplishes this weight reduction by machining the seatpost all over; including the oval inner diameter. Every component of the Masterpiece seatpost is 100 percent American made. This includes all fasteners and forgings. Each product is 100 percent inspected Saddle rails from 7 x 7mm up to 7 x 10mm work well with Thomson Masterpiece clamps. Weight limit: 200 pounds (91 Kilos). Colour: Black. Setback: Inline. Weight: 190g 31.6 x 350mm Inline (PBK office scales).
Genuine Tacx Micro Spline Cassette body.
Sun Ringle Bubba Freehub Body KitComing equipped with a tough alloy construction, this replacement freehub body kit offers maximum durability on your mountain bike (MTB) trail riding adventures. Specially tailored for compatibility with Sun Ringle Super Bubba and Bubba hubs, this replacement is ideal for breathing new life back into your rear wheel. Genuine Sun Ringle replacement part.Features: Material: Alloy Use: MTB Hub Compatibility: Super Bubba and Bubba hubs Freehub Compatibility: Multiple options available to selectManufacturer's Part Number: 281-37248-K003 Purple Micro SplineBuy Sun Ringle Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Sun Ringle Bubba X Freehub Body KitFeaturing a hard-wearing alloy construction, this replacement freehub body kit delivers maximum durability on your mountain bike (MTB) trail riding adventures. Specially tailored for compatibility with Sun Ringle Super Bubba X and Bubba X hubs, this model is a great choice for breathing new life back into your rear wheel. Genuine Sun Ringle replacement part.Features: Material: Alloy Use: MTB Hub Compatibility: Super Bubba X and Bubba X hubs Freehub Compatibility: Multiple options available to selectManufacturer's Part Numbers: 281-38183-K001 Purple Shimano 281-38183-K002 Purple SRAM XD 281-38183-K003 Purple Micro SplineBuy Sun Ringle Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Stay Strong Front Line Race Stem uses a fully CNC machined alloy construction with a cut-out design to drastically reduce weight. Solid bolts lock down that face plate, securing your bars in place and. Laser etched Stay Strong logos add the finishing touch to this race tuned piece. ###section### Product Specs TYPE: 22.2mm REACH: 45mm/50mm/55mm Options RISE: TBC CLAMPING DIAMETER: Front Load WEIGHT: TBC
The Stay Strong Top Line Race Stem blends traditional BMX stem design with race specific features to create this lighter weight, sturdy stem. Fully CNC machined alloy construction with cut-out/through design to shave excess weight. Laser etched Stay Strong logos add the finishing touches. ###section### Product Specs TYPE: 22.2mm REACH: 35mm/40mm/45mm/50mm/53mm/57mm/60mm Options RISE: TBC CLAMPING DIAMETER: Top Load WEIGHT: 290g (10.2oz)
The Stay Strong V2 Top Line 1-1/8" Stem utilises a top load design with a fully CNC machined alloy construction. Its cut-out/through design cuts down the overall weight of the stem without sacrificing any of its strength. The Top Line Stem also features heat-treated M6 bolts and 31mm CNC'd compression bolt recess with laser etched Stay Strong logos adding the finishing touch. ###section### Product Specs TYPE: 22.2mm REACH: 35-60mm options RISE: TBC CLAMPING DIAMETER: Top Load WEIGHT: 290g (10.2oz)
The Stay Strong V2 Top Line 1-1/8" Stem utilises a top load design with a fully CNC machined alloy construction. Its cut-out/through design cuts down the overall weight of the stem without sacrificing any of its strength. The Top Line Stem also features heat-treated M6 bolts and 31mm CNC'd compression bolt recess with laser etched Stay Strong logos adding the finishing touch. ###section### Product Specs TYPE: 22.2mm REACH: 35-60mm options RISE: TBC CLAMPING DIAMETER: Top Load WEIGHT: 290g (10.2oz)
The Stay Strong V2 Front Line Top Load Stem is made from fully CNC machined alloy with a cut-out/through design to dramatically reduce weight. Utilising heat-treated M6 bolts and a 31mm CNC'd compression bolt recess for a secure fit that doesn't slip. The V2 Front Line Stem is finished with laser etched Stay Strong logos. ###section### Product Specs TYPE: 22.2mm REACH: 45-55mm options RISE: TBC CLAMPING DIAMETER: Front Load WEIGHT: 290g (10.2oz)