Whether you've lost a valve cap or just want to bling your existing pair of Peaty's valves, this kit gives you everything you need. Compatible with all Peaty's Tubeless Valves. Includes: 1x spoke key cap (for 3.4mm spoke nipple), 1x valve core remover cap & 2x lock rings.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
With design, sustainability & quality running right to the core, there’s only one company we could work with on our valve colours - chris king! with our valves for life guarantee and their stunning colourways your bike is in for a real treat for years to come! MK2, WHAT'S NEW? Still made Made from lightweight anodised 7075 aluminium as standard, our new mk2 tubeless valves are now compatible with all rim inserts and come with a spoke key cap as well as a valve core removal cap. That's Right ... The best just got even better!
Everyone knows that a straight line is the fastest line! That's why Peaty's made their Holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.Available in 12x Chris King coloursUnique Patent Pending compact straight line design for maximum airflowSimply push down to inflateUnique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without glovesEach kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeveIt's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike. Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the O-rings to the awesome Chris king anodized colours.Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.
The Torq Organic Energy Bar has been formulated to produce an energy bar that is ultra-high in carbohydrates, incredibly low in fat and incorporating ingredients offering wide range glycaemic index to provide immediate and sustained glucose release. Low in fat and contains multiple-transportable carbohydratesMoist and chewy texture makes them easy to eat on the goContains only fairly traded fruitOrganic Soil Association certifiedNo colours, artificial flavours or preservatives and suitable for vegansFar too often energy bars are difficult to eat, being too dry or stodgy and lacking in any appealing flavour, and those that are palatable often contain far too much fat. The Torq Organic Energy Bar has achieved the perfect combination of taste, texture and fat content. Containing just over 2 grams of fat per bar, the Torq bar is delicious, moist and chewy and packed full of usable carbohydrate, perfect for before, during and after exercise.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Everyone knows that a straight line is the fastest line! That's why Peaty's made their Holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.Available in 12x Chris King coloursUnique Patent Pending compact straight line design for maximum airflowSimply push down to inflateUnique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without glovesEach kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeveIt's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bikeMade from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the O-rings to the awesome Chris King anodized colours. Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.
The new Torq chew represents an innovative new way to fuel during exercise. The chews have been cold-pressed from 4 organic ingredients and have been formulated to deliver carbohydrate to the working muscles through an optimised 2:1 Glucose:Fructose formulation. Torq Chews have the texture and flavour of chewy confectionery, yet the formulation is certified 100% organic by the Soil Association, so as ever, nutritional purity is once again at the top of the Torq agenda. Each chew contains 30g of carbohydrate, so represents 1 Torq Unit and forms part of the Torq Fuelling System. Torq Chews have been deliberately formulated to represent a pleasant challenge to eat and can be consumed in all circumstances where our Torq bar would usually be taken, as well as being extremely popular as a trail snack for folk who like to stop to take on fuel and treat themselves to something deliciously moreish. Due to the chewy nature of this product, we do recommend that you keep the Torq Chew in the back pocket of your jersey, next to your body in cooler weather to maintain the perfect texture.15 x 39g2:1 Glucose:Fructose DerivativesCold-PressedVery Low In FatNo Gluten Containing Ingredients UsedNo Colours, Sweeteners Or PreservativesSoil Association Certified Organic
Torq recovery is a highly advanced post-exercise nutritional drink formulation that has been designed to repair, recharge and refuel fatigued muscle tissue after heavy exercise. Torq's unique matrix of Glucose Polymers, Fructose and Whey Protein Isolate stimulate the rapid absorption of carbohydrate to re-stock vital glycogen stores. Torq's active ingredients, D-Ribose, L-Glutamine and blend of carefully selected vitamins and minerals work together to repair and recharge over-stressed muscle fibres. It is generally accepted that consuming carbohydrate and protein at a 3:1 ratio within 15 minutes of finishing exercise will speed up glycogen synthesis (numerous authors have confirmed this). In other words, it will help you to store carbohydrate more effectively than consuming carbohydrate alone and/or waiting until this 15-minute window of opportunity has passed. It is also generally accepted that whey protein is faster acting and available more quickly than any other kind of protein, thus it provides the amino acids necessary for muscle repair with little delay. Torq recovery represents this 3:1 blend of carbohydrate and high quality whey protein. All flavours in the range are natural with no colours, artificial sweeteners or preservatives. There is not a single ingredient within Torq recovery's formulation that isn't derived from a natural source, or doesn't naturally-occur within the human body.1 x 1.5kg PouchMultiple-Transportable CarbohydratesWhey Protein IsolateRibose, Glutamine, Vitamins And MineralsSilky Smooth TextureNo Colours, Artificial Sweeteners Or Preservatives
Chris King Dropset 3 Headset IS41/IS52Constructed using top quality materials, this versatile Chris King headset ensures your fork rotates with smoothness and swiftness when connected to your head tube. Comprising of a 41mm upper bearing and 52mm lower part, it keeps a firm grip to your fork thanks to its patented GripLock construction, letting you twist and turn as efficiently as can be. Compatible with Santa Cruz Stigmata frames among others, this durable and dependable headset is a great choice to keep your steering column spinning.Features: Upper Bearing: 41mm 45x45 Lower Bearing: 52mm 36x45 Design: Patented GripLock construction Compatibility: Santa Cruz Stigmata frame (without baseplate), and more Buy Chris King Components from Chain Reaction Cycles, the World's Largest Online Bike Store.